March 2013 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Mar 1 04:22:46 EST 2013
Ending: Sat Mar 30 15:57:13 EDT 2013
Messages: 672

• [PATCH 0/7] Rework current Tegra support   Lucas Stach
  • [PATCH 1/7] tegra: move address map to tegra20-silicon.h   Lucas Stach
    • [PATCH 1/7] tegra: move address map to tegra20-silicon.h   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/7] tegra: move address map to tegra20-silicon.h   Lucas Stach
      • [PATCH 1/7] tegra: move address map to tegra20-silicon.h   Antony Pavlov
  • [PATCH 2/7] tegra: remove debug_ll   Lucas Stach
    • [PATCH 2/7] tegra: remove debug_ll   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 2/7] tegra: remove debug_ll   Sascha Hauer
  • [PATCH 3/7] tegra: switch to ARMv7 cpu type   Lucas Stach
  • [PATCH 4/7] tegra: add blank tegra20 platform init   Lucas Stach
    • [PATCH 4/7] tegra: add blank tegra20 platform init   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/7] tegra: add driver for the clock and reset module   Lucas Stach
    • [PATCH 5/7] tegra: add driver for the clock and reset module   Sascha Hauer
      • [PATCH 5/7] tegra: add driver for the clock and reset module   Lucas Stach
  • [PATCH 6/7] tegra: add proper timer driver   Lucas Stach
    • [PATCH 6/7] tegra: add proper timer driver   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 6/7] tegra: add proper timer driver   Sascha Hauer
      • [PATCH 6/7] tegra: add proper timer driver   Lucas Stach
      • [PATCH 6/7] tegra: add proper timer driver   Antony Pavlov
      • [PATCH 6/7] tegra: add proper timer driver   Lucas Stach
      • [PATCH 6/7] tegra: add proper timer driver   Antony Pavlov
  • [PATCH 7/7] tegra: add power management controller driver   Lucas Stach
    • [PATCH 7/7] tegra: add power management controller driver   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 7/7] tegra: add power management controller driver   Sascha Hauer
      • [PATCH 7/7] tegra: add power management controller driver   Antony Pavlov
      • [PATCH 7/7] tegra: add power management controller driver   Lucas Stach
  • [PATCH v2 0/5] Rework current Tegra support   Lucas Stach
    • [PATCH v2 1/5] tegra: pull in iomap.h from the Linux kernel   Lucas Stach
    • [PATCH v2 2/5] tegra: switch to ARMv7 cpu type   Lucas Stach
      • [PATCH v2 2/5] tegra: switch to ARMv7 cpu type   Antony Pavlov
      • [PATCH v2 2/5] tegra: switch to ARMv7 cpu type   Lucas Stach
      • [PATCH v2 2/5] tegra: switch to ARMv7 cpu type   Antony Pavlov
      • [PATCH v2 2/5] tegra: switch to ARMv7 cpu type   Sascha Hauer
      • [PATCH v2 2/5] tegra: switch to ARMv7 cpu type   Antony Pavlov
    • [PATCH v2 3/5] tegra: add driver for the clock and reset module   Lucas Stach
      • [PATCH v2 3/5] tegra: add driver for the clock and reset module   Antony Pavlov
      • [PATCH v2 3/5] tegra: add driver for the clock and reset module   Sascha Hauer
    • [PATCH v2 4/5] tegra: add proper timer driver   Lucas Stach
      • [PATCH v2 4/5] tegra: add proper timer driver   Antony Pavlov
    • [PATCH v2 5/5] tegra: add power management controller driver   Lucas Stach
      • [PATCH v2 5/5] tegra: add power management controller driver   Antony Pavlov
• New environment ?   George Pontis
  • New environment ?   Sascha Hauer
• [PATCH 1/5] trivial: doc: fix typos in mach-arm.dox   Josh Cartwright
• [PATCH 0/5] Zynq support for barebox   Josh Cartwright
  • [PATCH 2/5] defaultenv: fixed mismatched braces in bin/boot   Josh Cartwright
  • [PATCH 3/5] ARM: zynq: add driver for Zynq uarts   Josh Cartwright
    • [PATCH 3/5] ARM: zynq: add driver for Zynq uarts   Antony Pavlov
      • [PATCH 3/5] ARM: zynq: add driver for Zynq uarts   Josh Cartwright
    • [PATCH 3/5] ARM: zynq: add driver for Zynq uarts   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/5] ARM: zynq: add driver for Zynq uarts   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/5] ARM: zynq: add support for Zynq 7000 SoC   Josh Cartwright
    • [PATCH 4/5] ARM: zynq: add support for Zynq 7000 SoC   Antony Pavlov
      • [PATCH 4/5] ARM: zynq: add support for Zynq 7000 SoC   Josh Cartwright
      • [PATCH 4/5] ARM: zynq: add support for Zynq 7000 SoC   Sascha Hauer
  • [PATCH 5/5] ARM: zynq: add support for zc702 development board   Josh Cartwright
    • [PATCH 5/5] ARM: zynq: add support for zc702 development board   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 5/5] ARM: zynq: add support for zc702 development board   Josh Cartwright
      • [PATCH 5/5] ARM: zynq: add support for zc702 development board   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 0/5] Zynq support for barebox   Steffen Trumtrar
    • [PATCH 0/5] Zynq support for barebox   Josh Cartwright
      • [PATCH 0/5] Zynq support for barebox   Steffen Trumtrar
      • [PATCH 0/5] Zynq support for barebox   Josh Cartwright
      • [PATCH 0/5] Zynq support for barebox   Steffen Trumtrar
      • [PATCH 0/5] Zynq support for barebox   Michal Simek
      • [PATCH 0/5] Zynq support for barebox   Steffen Trumtrar
      • [PATCH 0/5] Zynq support for barebox   Josh Cartwright
      • [PATCH 0/5] Zynq support for barebox   Steffen Trumtrar
      • [PATCH 0/5] Zynq support for barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: cfa10036: Remove the boot partition and boot from ext   Sascha Hauer
• UBOOT2 JMP   Sascha Hauer
• [PATCH v2 0/2] add mxs application uart driver   Sascha Hauer
• [PATCH 1/1] of: add do_fixup_by_compatible with u32 and string version   Sascha Hauer
• [PATCH 1/2] memsize: Make get_ram_size RAM proof   Sascha Hauer
  • [PATCH 1/2] memsize: Make get_ram_size RAM proof   Maxime Ripard
    • [PATCH 1/2] memsize: Make get_ram_size RAM proof   Juergen Beisert
      • [PATCH 1/2] memsize: Make get_ram_size RAM proof   Maxime Ripard
• v2013.03.0   Sascha Hauer
• [For-next PATCH 1/1] switch more boards to lwl-y   Sascha Hauer
• [PATCH v2] remove libfdt   Sascha Hauer
  • [PATCH 01/37] of: unflatten: allocate root node explicitly   Sascha Hauer
  • [PATCH 02/37] of: export of_find_child   Sascha Hauer
  • [PATCH 03/37] of: removed unused variables   Sascha Hauer
  • [PATCH 04/37] of: Let of_find_node_by_path iterate over tree   Sascha Hauer
  • [PATCH 05/37] of: remove allnodes list   Sascha Hauer
  • [PATCH 06/37] ARM bootm: Use of_get_fixed_tree   Sascha Hauer
  • [PATCH 07/37] of: Add of_set_property and of_create_node   Sascha Hauer
  • [PATCH 08/37] of_node command: use of_create_node   Sascha Hauer
  • [PATCH 09/37] of: Add missing prototype for of_device_is_compatible   Sascha Hauer
  • [PATCH 10/37] of: let of_unflatten_dtb return the unflattened tree   Sascha Hauer
  • [PATCH 11/37] of: Add root node argument to of_find_node_by_path   Sascha Hauer
  • [PATCH 12/37] of: Add of_write_number helper   Sascha Hauer
  • [PATCH 13/37] of: Add initrd helper   Sascha Hauer
    • [PATCH 13/37] of: Add initrd helper   Alexander Aring
  • [PATCH 14/37] of: make unflatten independent of libfdt   Sascha Hauer
  • [PATCH 15/37] of: make flatten independent of libfdt   Sascha Hauer
  • [PATCH 16/37] of/fdt: use optimized endianess conversion   Sascha Hauer
  • [PATCH 17/37] oftree command: Use of_print_nodes   Sascha Hauer
  • [PATCH 18/37] of: move OFTREE Kconfig option to drivers/of/   Sascha Hauer
  • [PATCH 19/37] of: make OFDEVICE a user selectable option   Sascha Hauer
  • [PATCH 20/37] oftree command: retire CMD_OFTREE_PROBE Kconfig option   Sascha Hauer
  • [PATCH 21/37] of: move oftree Kconfig to the top of the drivers menu   Sascha Hauer
  • [PATCH 22/37] of: Pass barebox internal format devicetree to of_get_fixed_tree   Sascha Hauer
  • [PATCH 23/37] bootm: Use of_print_nodes instead of fdt_print   Sascha Hauer
  • [PATCH 24/37] of: move flat devicetree functions to separate file   Sascha Hauer
  • [PATCH 25/37] of: Add of property write functions for u32   Sascha Hauer
  • [PATCH 26/37] of: make value of property in of_new_property optional   Sascha Hauer
  • [PATCH 27/37] of: Add missing prototype for size/address counting functions   Sascha Hauer
  • [PATCH 28/37] of: fixup unflattened devicetree   Sascha Hauer
  • [PATCH 29/37] of_* commands: print usage when insufficient arguments are given   Sascha Hauer
  • [PATCH 30/37] of_property command: Fix crash with empty property value   Sascha Hauer
  • [PATCH 31/37] ARM: bootm: rework concatenated oftree   Sascha Hauer
  • [PATCH 32/37] of: memory: Use of_write_number   Sascha Hauer
  • [PATCH 33/37] of: Add reservemap handling   Sascha Hauer
  • [PATCH 34/37] bootm: Pass unflattened devicetree to handlers   Sascha Hauer
  • [PATCH 35/37] ARM bootm: Switch initrd support to unflattened tree   Sascha Hauer
  • [PATCH 36/37] of: remove unused libfdt   Sascha Hauer
  • [PATCH 37/37] of: make locally used functions static   Sascha Hauer
• [PATCH] nand bad block erase and i.MX bbt tool   Sascha Hauer
  • [PATCH 01/10] mtd: nand: register nand flashes with nand specific function   Sascha Hauer
  • [PATCH 02/10] mtd: Add parameter to allow erasing bad blocks   Sascha Hauer
  • [PATCH 03/10] mtd nand: introduce bbm.h   Sascha Hauer
  • [PATCH 04/10] nand command: use loff_t for block offset   Sascha Hauer
  • [PATCH 05/10] nand command: use enumeration for command instead of bitmask   Sascha Hauer
    • [PATCH 05/10] nand command: use enumeration for command instead of bitmask   Alexander Aring
  • [PATCH 06/10] nand command: check for <dev> directly after option parsing   Sascha Hauer
  • [PATCH 07/10] mtd: nand: replace NAND_USE_FLASH_BBT with NAND_BBT_USE_FLASH   Sascha Hauer
  • [PATCH 08/10] mtd nand i.MX: remove unused code   Sascha Hauer
  • [PATCH 09/10] mtd: nand: Add bbt parameter   Sascha Hauer
    • [PATCH 09/10] mtd: nand: Add bbt parameter   Juergen Beisert
      • [PATCH 09/10] mtd: nand: Add bbt parameter   Sascha Hauer
  • [PATCH 10/10] mtd: nand: Add command to generate a flash BBT   Sascha Hauer
    • [PATCH 10/10] mtd: nand: Add command to generate a flash BBT   Juergen Beisert
      • [PATCH 10/10] mtd: nand: Add command to generate a flash BBT   Sascha Hauer
• [PATCH] usb: ehci: initialize ehci_data   Sascha Hauer
  • [PATCH] usb: ehci: initialize ehci_data   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] usb: ehci: initialize ehci_data   Sascha Hauer
      • [PATCH] usb: ehci: initialize ehci_data   Alexander Aring
      • [PATCH] usb: ehci: initialize ehci_data   Sascha Hauer
      • [PATCH] usb: ehci: initialize ehci_data   Alexander Aring
  • [PATCH] usb: ehci: initialize ehci_data   Antony Pavlov
    • [PATCH] usb: ehci: initialize ehci_data   Sascha Hauer
• [PATCH] OMAP3 updates   Sascha Hauer
  • [PATCH 1/2] ARM: OMAP3: invalidate L2 cache using ROM API   Sascha Hauer
  • [PATCH 2/2] ARM: OMAP: beagle: Add missing MMC iomux setup   Sascha Hauer
    • [PATCH 1/1] beagle: add missing mmc twl and control init   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/1] beagle: add missing mmc twl and control init   Alexander Aring
      • [PATCH 1/1] beagle: add missing mmc twl and control init   Sascha Hauer
      • [PATCH 1/1] beagle: add missing mmc twl and control init   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/1] beagle: add missing mmc twl and control init   Sascha Hauer
      • [PATCH 1/1] beagle: add missing mmc twl and control init   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/1] beagle: add missing mmc twl and control init   Sascha Hauer
• [PATCH] ARM: Add relocatable binary support   Sascha Hauer
  • [PATCH 2/6] ARM: add early mmu cache flush function and use it in setup_c   Sascha Hauer
  • [PATCH 3/6] ARM: provide accessor functions for linker variables   Sascha Hauer
  • [PATCH 4/6] ARM boards: Use accessor functions to access linker variables   Sascha Hauer
  • [PATCH 6/6] ARM: Add relocatable binary support   Sascha Hauer
    • Re: [PATCH 6/6] ARM: Add relocatable binary support   Alexander Shiyan
      • [PATCH 6/6] ARM: Add relocatable binary support   Sascha Hauer
      • Re[2]: [PATCH 6/6] ARM: Add relocatable binary support   Alexander Shiyan
      • [PATCH 6/6] ARM: Add relocatable binary support   Sascha Hauer
    • [PATCH 6/6] ARM: Add relocatable binary support   Alexander Aring
      • [PATCH 6/6] ARM: Add relocatable binary support   Sascha Hauer
• [PATCH 1/6] ARM: make cpu architecture detection available as static inline function   Sascha Hauer
  • [PATCH 1/6] ARM: make cpu architecture detection available as static inline function   Alexander Aring
    • [PATCH 1/6] ARM: make cpu architecture detection available as static inline function   Sascha Hauer
• [PATCH 5/6] ARN: fixup vector addresses for relocatable binaries   Sascha Hauer
• [PATCH 1/1] devfs: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] devfs: add symlink support   Sascha Hauer
    • [PATCH 1/1] devfs: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/1] devfs: add symlink support   Sascha Hauer
      • [PATCH 1/1] devfs: add symlink support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] defaultenv-2: add boot sequence   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] defaultenv-2: add boot sequence   Sascha Hauer
• [PATCH 1/1] highbank: switch to defaultenv-2   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] highbank: switch to defaultenv-2   Sascha Hauer
    • [PATCH 1/1] highbank: switch to defaultenv-2   Jean-Christophe PLAGNIOL-VILLARD
• Antwort: Re: v2013.02.0 phyCORE-OMAP4 MLO to big   Jürgen
  • Antwort: Re: v2013.02.0 phyCORE-OMAP4 MLO to big   Sascha Hauer
    • Antwort: Re: v2013.02.0 phyCORE-OMAP4 MLO to big   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] mtd: nand: Fix compiler warning   Alexander Shiyan
  • [PATCH 2/2] w1: Fix compiler warning   Alexander Shiyan
  • [PATCH 1/2] mtd: nand: Fix compiler warning   Sascha Hauer
• debug in PBL   Alexander Shiyan
  • debug in PBL   Jean-Christophe PLAGNIOL-VILLARD
  • debug in PBL   Sascha Hauer
    • Re[2]: debug in PBL   Alexander Shiyan
      • debug in PBL   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] usb: chipidea-imx: Fix usb initialization   Alexander Shiyan
  • [PATCH] usb: chipidea-imx: Fix usb initialization   Sascha Hauer
• [PATCH 0/6 v2] introduction of dmesg support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/6] kfifo: introduce kfifo_dump_str to dump the fifo   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/6] intoduce dmesg to print the barebox printk to dmesg ring buffer   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 6/6] meminfo: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/6] console: switch to kfifo_dump_str   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/6] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/6] at91: clock switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] dummy malloc: Add licence header   Sascha Hauer
  • [PATCH] dummy malloc: Add licence header   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/9 v3] introduction of dmesg support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/9] kfifo: introduce kfifo_dump_str to dump the fifo   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 2/9] console: switch to kfifo_dump_str   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/9] intoduce dmesg to print the barebox printk to dmesg ring buffer   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 5/9] at91: clock switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 6/9] meminfo: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 7/9] net/console: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 8/9] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 9/9] barebox_banner: switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/9] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/9 v4] introduction of dmesg support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/9] kfifo: introduce kfifo_dump_str to dump the fifo   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 2/9] console: switch to kfifo_dump_str   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/9] intoduce dmesg to print the barebox printk to dmesg ring buffer   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 3/9] intoduce dmesg to print the barebox printk to dmesg ring buffer   Sascha Hauer
    • [PATCH 5/9] at91: clock switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 6/9] meminfo: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 7/9] net/console: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 7/9] net/console: switch to pr_xxx   Sascha Hauer
    • [PATCH 8/9] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 9/9] barebox_banner: switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/9] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 00/20] introduce application support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 01/20] Makefile: x_flags prepare for apps support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 03/20] kbuild: add application (app) target   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 04/20] Introduce application (app) support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 05/20] app: Introduce libc support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 07/20] app: Introduce example application   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 09/20] arm: add application support   Jean-Christophe PLAGNIOL-VILLARD
      • Re: [PATCH 09/20] arm: add application support   Alexander Shiyan
      • [PATCH 09/20] arm: add application support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 10/20] app: printf: use HelenOS verison with wide char support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 11/20] app: printf: add version from contiki   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 12/20] app: add tinycurses support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 12/20] app: add tinycurses support   Sascha Hauer
      • [PATCH 12/20] app: add tinycurses support   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 13/20] app: curses: add pdcurses   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 14/20] app: add test curses   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 15/20] app: pdcurses: add libmenu   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 16/20] app: pdcurses: add libform   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 17/20] app: curses: add menu example   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 18/20] app: curses: add panel example   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 19/20] app: curses: add form example   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 20/20] highbank: enable application support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 02/20] tlsf_malloc: drop duplicate include   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 02/20] tlsf_malloc: drop duplicate include   Sascha Hauer
  • [PATCH 06/20] app: add some utils   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 06/20] app: add some utils   Sascha Hauer
      • [PATCH 06/20] app: add some utils   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 06/20] app: add some utils   Sascha Hauer
      • [PATCH 06/20] app: add some utils   Alexander Aring
  • [PATCH 08/20] filetype: add barebox arm application   Jean-Christophe PLAGNIOL-VILLARD
  • [RFC PATCH 00/20] introduce application support   Sascha Hauer
• [RFC] Makefile: Create empty <config.h> if this header file is not needed by board   Alexander Shiyan
  • Re: [RFC] Makefile: Create empty <config.h> if this header file is not needed by board   Alexander Shiyan
    • [RFC] Makefile: Create empty <config.h> if this header file is not needed by board   Sascha Hauer
      • Re[2]: [RFC] Makefile: Create empty <config.h> if this header file is not needed by board   Alexander Shiyan
      • [RFC] Makefile: Create empty <config.h> if this header file is not needed by board   Sascha Hauer
      • Re[2]: [RFC] Makefile: Create empty <config.h> if this header file is not needed by board   Alexander Shiyan
• [PATCH] fix another brown paper bag bug introduced with compile time loglevel   Sascha Hauer
• [PATCH 0/9 v5] introduction of dmesg support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/11 v6] introduction of dmesg support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 00/11 v6] introduction of dmesg support   Jan Lübbe
  • [PATCH 01/11] kfifo: introduce kfifo_dump_str to dump the fifo   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 03/11] intoduce dmesg to print the barebox printk to dmesg ring buffer   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 03/11] intoduce dmesg to print the barebox printk to dmesg ring buffer   Sascha Hauer
    • [PATCH 04/11] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 06/11] meminfo: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 07/11] net/console: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 07/11] net/console: switch to pr_xxx   Sascha Hauer
      • [PATCH 07/11] net/console: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 07/11] net/console: switch to pr_xxx   Sascha Hauer
    • [PATCH 08/11] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 09/11] barebox_banner: switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 11/11] ext4: switch debug and printf to dev_xxx   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 02/11] console: switch to kfifo_dump_str   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 05/11] at91: clock switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 10/11] net/phy: convert to pr_info   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Extend device_platform_driver macro   Alexander Shiyan
  • [PATCH] Extend device_platform_driver macro   Sascha Hauer
    • Re[2]: [PATCH] Extend device_platform_driver macro   Alexander Shiyan
      • [PATCH] Extend device_platform_driver macro   Uwe Kleine-König
      • Re[2]: [PATCH] Extend device_platform_driver macro   Alexander Shiyan
    • [PATCH] Extend device_platform_driver macro   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ata/ahci work   Sascha Hauer
  • [PATCH 1/5] ata: ahci: fix wrong link check   Sascha Hauer
  • [PATCH 2/5] ata: add ata logical device to defer probe   Sascha Hauer
  • [PATCH 3/5] ata: Add init callback to ata_port_operations   Sascha Hauer
  • [PATCH 4/5] ata: ahci: implement init callback   Sascha Hauer
  • [PATCH 5/5] ata: ahci: refactor init functions   Sascha Hauer
• [PATCH] Add DataModul Realq7 board support   Sascha Hauer
  • [PATCH 1/3] ARM i.MX6: Add mmdc calibration support   Sascha Hauer
    • Re: [PATCH 1/3] ARM i.MX6: Add mmdc calibration support   Alexander Shiyan
      • [PATCH 1/3] ARM i.MX6: Add mmdc calibration support   Sascha Hauer
    • [PATCH 1/3] ARM i.MX6: Add mmdc calibration support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/3] Add DMO RealQ7 board support   Sascha Hauer
    • [PATCH 2/3] Add DMO RealQ7 board support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/3] Add DMO RealQ7 board support   Sascha Hauer
      • [PATCH 2/3] Add DMO RealQ7 board support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/3] Add DMO RealQ7 board support   Sascha Hauer
      • [PATCH 2/3] Add DMO RealQ7 board support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/3] Add DMO RealQ7 board support   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/3] Add DMO RealQ7 board support   Sascha Hauer
  • [PATCH 3/3] Add DMO RealQ7 defconfig   Sascha Hauer
• Status Tegra 2/3 Support   Erwin Rol
  • Status Tegra 2/3 Support   Lucas Stach
• [PATCH] image and bss size decrease   Sascha Hauer
  • [PATCH 01/10] mips: initialize malloc pool before start_barebox()   Sascha Hauer
  • [PATCH 02/10] nios: initialize malloc pool before start_barebox()   Sascha Hauer
  • [PATCH 03/10] openrisc: initialize malloc pool before start_barebox()   Sascha Hauer
  • [PATCH 04/10] blackfin: initialize malloc pool before start_barebox()   Sascha Hauer
  • [PATCH 05/10] x86: initialize malloc pool before start_barebox()   Sascha Hauer
  • [PATCH 06/10] bus: Make struct device a pointer   Sascha Hauer
  • [PATCH 07/10] command: remove list_head from struct command   Sascha Hauer
  • [PATCH 08/10] command: remove statically initialized aliases   Sascha Hauer
  • [PATCH 09/10] fs: allocate FILE table dynamically   Sascha Hauer
  • [PATCH 10/10] gpio: allocate gpio_desc table dynamically   Sascha Hauer
  • [PATCH] image and bss size decrease   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] image and bss size decrease   Sascha Hauer
  • [PATCH] image and bss size decrease   Juergen Beisert
• [PATCH] net: fec: Use standard phy type defines   Sascha Hauer
  • [PATCH 1/2] net: fec: drop sevenwire support   Sascha Hauer
    • [PATCH 1/2] net: fec: drop sevenwire support   Alexander Aring
      • [PATCH 1/2] net: fec: drop sevenwire support   Sascha Hauer
  • [PATCH 2/2] net: fec: use standard phy type defines   Sascha Hauer
  • [PATCH] net: fec: Use standard phy type defines   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] net: fec: Use standard phy type defines   Sascha Hauer
• [PATCH] Make: update setlocalversion from the kernel   Sascha Hauer
• [PATCH 0/9] Add support for booting ArchosG9 from sd-card   Vicente Bergas
  • [PATCH 1/9] defaultenv-2: don't load nonexistent file   Vicente Bergas
  • [PATCH 2/9] omap4_romusb: rename omap4_usbboot_pdata to omap4_usbboot_data   Vicente Bergas
  • [PATCH 3/9] omap_uart: rename OMAP3EVM_UARTx to OMAP_UARTx   Vicente Bergas
  • [PATCH 4/9] omap_uart: add low level port serial initialization   Vicente Bergas
    • [PATCH 4/9] omap_uart: add low level port serial initialization   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 4/9] omap_uart: add low level port serial initialization   vj
      • [PATCH 4/9] omap_uart: add low level port serial initialization   Sascha Hauer
      • [PATCH 4/9] omap_uart: add low level port serial initialization   vj
      • [PATCH 4/9] omap_uart: add low level port serial initialization   Sascha Hauer
      • [PATCH 4/9] omap_uart: add low level port serial initialization   vj
  • [PATCH 5/9] panda: remove unused configuration items   Vicente Bergas
  • [PATCH 6/9] omap4_romusb: allow adding usb-serial when not booting from usb   Vicente Bergas
    • [PATCH 6/9] omap4_romusb: allow adding usb-serial when not booting from usb   Sascha Hauer
  • [PATCH 7/9] menu: avoid errors when building submenus   Vicente Bergas
    • [PATCH 7/9] menu: avoid errors when building submenus   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 7/9] menu: avoid errors when building submenus   vj
      • [PATCH 7/9] menu: avoid errors when building submenus   Sascha Hauer
  • [PATCH 8/9] archos: add atag appender for all features   Vicente Bergas
    • [PATCH 8/9] archos: add atag appender for all features   Sascha Hauer
    • [PATCH 8/9] archos: add atag appender for all features   Vicente Bergas
      • [PATCH 8/9] archos: add atag appender for all features   Sascha Hauer
  • [PATCH 9/9] archosg9: enable booting from sd-card   Vicente Bergas
  • [PATCH 0/9] Add support for booting ArchosG9 from sd-card   Sascha Hauer
• [PATCH v2 1/6] Extend device_platform_driver macro   Alexander Shiyan
  • [PATCH v2 3/6] Introduce console_platform_driver() macro and use it for serial drivers   Alexander Shiyan
  • [PATCH v2 4/6] SPI: Rename spi_register_driver() for using with register_driver_macro()   Alexander Shiyan
  • [PATCH v2 5/6] I2C: Rename i2c_register_driver() for using with register_driver_macro()   Alexander Shiyan
  • [PATCH v2 6/6] Introduce device_spi_driver() macro and use it for SPI drivers   Alexander Shiyan
• [PATCH v2 2/6] Add more drivers to using device_platform_driver()   Alexander Shiyan
• [PATCH] misc cleanups   Sascha Hauer
  • [PATCH 1/4] include asm/sections.h instead of asm-generic/sections.h   Sascha Hauer
  • [PATCH 2/4] MMC i.MX: remove unnecessary mach include   Sascha Hauer
  • [PATCH 3/4] ARM i.MX: Add double include protection for generic.h   Sascha Hauer
• [PATCH 4/4] ARM: Add missing barebox_arm_boarddata function   Sascha Hauer
• New dt-only arm/mach   Alexander Shiyan
  • New dt-only arm/mach   Sascha Hauer
    • Re[2]: New dt-only arm/mach   Alexander Shiyan
  • New dt-only arm/mach   Maxime Ripard
    • Re[2]: New dt-only arm/mach   Alexander Shiyan
      • New dt-only arm/mach   Maxime Ripard
      • New dt-only arm/mach   Sascha Hauer
      • Re[2]: New dt-only arm/mach   Alexander Shiyan
  • New dt-only arm/mach   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] ArchosG9: add keyboard input and new reset menu entries   Vicente Bergas
• [PATCH 1/4] gpio_keys: detect keys pressed before booting.   Vicente Bergas
• [PATCH 2/4] twl6030: add power button as an input key   Vicente Bergas
  • [PATCH 2/4] twl6030: add power button as an input key   Sascha Hauer
  • [PATCH 2/4] twl6030: add power button as an input key   Vicente Bergas
    • [PATCH 3/4] OMAP4: add command to select next boot device priority   Vicente Bergas
      • [PATCH 3/4] OMAP4: add command to select next boot device priority   Sascha Hauer
      • [PATCH 3/4] OMAP4: add command to select next boot device priority   vj
      • [PATCH 3/4] OMAP4: add command to select next boot device priority   Sascha Hauer
      • [PATCH 3/4] OMAP4: add command to select next boot device priority   vj
    • [PATCH 2/4] twl6030: add power button as an input key   Sascha Hauer
• [PATCH 3/4] OMAP4: add command to select next boot device priority   Vicente Bergas
  • [PATCH 3/4] OMAP4: add command to select next boot device priority   Sascha Hauer
• [PATCH 4/4] ArchosG9: add keyboard input and new reset menu entries   Vicente Bergas
  • [PATCH 4/4] ArchosG9: add keyboard input and new reset menu entries   Sascha Hauer
    • [PATCH 4/4] ArchosG9: add keyboard input and new reset menu entries   vj
• Question about OMAP4 boot priorities   vj
• [PATCH v2] DMO Realq7 support   Sascha Hauer
  • [PATCH 1/4] net: phy: micrel: Update id table from kernel   Sascha Hauer
  • [PATCH 2/4] ARM i.MX6: Add mmdc calibration support   Sascha Hauer
  • [PATCH 3/4] Add DMO RealQ7 board support   Sascha Hauer
  • [PATCH 4/4] Add DMO RealQ7 defconfig   Sascha Hauer
• [PATCH 0/9] ARM: add support for Zynq   Steffen Trumtrar
  • [PATCH 1/9] serial: Add driver for Cadence UART   Steffen Trumtrar
    • [PATCH 1/9] serial: Add driver for Cadence UART   Sascha Hauer
  • [PATCH 2/9] ARM: Zynq: Add new architecture zynq   Steffen Trumtrar
    • [PATCH 2/9] ARM: Zynq: Add new architecture zynq   Sascha Hauer
    • [PATCH 2/9] ARM: Zynq: Add new architecture zynq   Josh Cartwright
    • [PATCH 2/9] ARM: Zynq: Add new architecture zynq   Josh Cartwright
  • [PATCH 4/9] ARM: zynq: Add support for the Avnet Zedboard   Steffen Trumtrar
    • [PATCH 4/9] ARM: zynq: Add support for the Avnet Zedboard   Sascha Hauer
  • [PATCH 5/9] ARM: zynq: add clk support for zynq7000   Steffen Trumtrar
  • [PATCH 6/9] ARM: zynq: clk: replace define with header   Steffen Trumtrar
    • [PATCH 6/9] ARM: zynq: clk: replace define with header   Josh Cartwright
      • [PATCH 6/9] ARM: zynq: clk: replace define with header   Steffen Trumtrar
  • [PATCH 7/9] ARM: zynq: clk: add pll type   Steffen Trumtrar
    • [PATCH 7/9] ARM: zynq: clk: add pll type   Josh Cartwright
      • [PATCH 7/9] ARM: zynq: clk: add pll type   Steffen Trumtrar
  • [PATCH 8/9] ARM: zynq: clk: convert to platform driver   Steffen Trumtrar
  • [PATCH 9/9] ARM: zynq: remove clocksource   Steffen Trumtrar
    • [PATCH 9/9] ARM: zynq: remove clocksource   Josh Cartwright
• [PATCH 3/9] ARM: zynq: add zynq fsbl checksum script   Steffen Trumtrar
  • [PATCH 3/9] ARM: zynq: add zynq fsbl checksum script   Sascha Hauer
• [PATCH 01/13] ARM: clep7212: Migrate to config-board   Alexander Shiyan
  • [PATCH 02/13] ARM: clps711x: Fix setup bus wait state scaling factor for 13Mhz mode   Alexander Shiyan
  • [PATCH 03/13] ARM: clps711x: Replace numeric PLL option with boolean for raise CPU frequency   Alexander Shiyan
  • [PATCH 04/13] ARM: clps711x: Add clocksource driver   Alexander Shiyan
    • [PATCH 04/13] ARM: clps711x: Add clocksource driver   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 04/13] ARM: clps711x: Add clocksource driver   Sascha Hauer
      • Re[2]: [PATCH 04/13] ARM: clps711x: Add clocksource driver   Alexander Shiyan
      • [PATCH 04/13] ARM: clps711x: Add clocksource driver   Sascha Hauer
      • Re[2]: [PATCH 04/13] ARM: clps711x: Add clocksource driver   Alexander Shiyan
  • [PATCH 05/13] ARM: clps711x: Using COMMON_CLK   Alexander Shiyan
    • [PATCH 05/13] ARM: clps711x: Using COMMON_CLK   Jean-Christophe PLAGNIOL-VILLARD
      • Re[2]: [PATCH 05/13] ARM: clps711x: Using COMMON_CLK   Alexander Shiyan
      • [PATCH 05/13] ARM: clps711x: Using COMMON_CLK   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 06/13] Add Generic GPIO driver   Alexander Shiyan
  • [PATCH 07/13] ARM: clps711x: Add GPIO driver   Alexander Shiyan
  • [PATCH 08/13] Add helpers to define resources   Alexander Shiyan
  • [PATCH 09/13] ARM: clps711x: Migrate to using DEFINE_RES_MEM macro   Alexander Shiyan
  • [PATCH 10/13] ARM: clps711x: Limit chipselect setup up to CS5   Alexander Shiyan
  • [PATCH 11/13] Add system controller register driver (SYSCON)   Alexander Shiyan
  • [PATCH 12/13] ARM: clps711x: Export system-wide registers through SYSCON driver   Alexander Shiyan
  • [PATCH 13/13] serial: clps711x: Migrate to using SYSCON driver   Alexander Shiyan
  • [PATCH 01/13] ARM: clep7212: Migrate to config-board   Sascha Hauer
• [PATCH 1/2] Makefile: Create empty <config.h> if this header file is not needed by board   Alexander Shiyan
  • [PATCH 2/2] Remove unused config.h   Alexander Shiyan
• [PATCH] usb/gadget/Kconfig: fix menu   Eric Bénard
  • [PATCH] usb/gadget/Kconfig: fix menu   Sascha Hauer
    • [PATCH] usb/gadget/Kconfig: fix menu   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH] usb/gadget/Kconfig: fix menu   Sascha Hauer
• [PATCH] Add dtc   Sascha Hauer
  • [PATCH 4/5] ARM: Add initial i.MX27 dts files   Sascha Hauer
  • [PATCH 5/5] drivers: Bail out if dev_request_mem_region fails   Sascha Hauer
• [PATCH 2/5] Makefile.lib: Add dtc support   Sascha Hauer
• [PATCH 3/5] ARM: Initial dts support   Sascha Hauer
• [PATCH] fix i.MX external NAND boot bad block handling   Sascha Hauer
  • [PATCH 1/4] ARM: i.MX: external nand boot: check for bad blocks   Sascha Hauer
  • [PATCH 2/4] ARM: head: Add some space behind the image header   Sascha Hauer
    • [PATCH 2/4] ARM: head: Add some space behind the image header   Juergen Beisert
  • [PATCH 3/4] ARM: i.MX: Add bbu handler for external NAND boot   Sascha Hauer
    • [PATCH 3/4] ARM: i.MX: Add bbu handler for external NAND boot   Juergen Beisert
      • [PATCH 3/4] ARM: i.MX: Add bbu handler for external NAND boot   Sascha Hauer
      • [PATCH 3/4] ARM: i.MX: Add bbu handler for external NAND boot   Juergen Beisert
  • [PATCH 4/4] ARM: i.MX pcm043: register external nand boot handler   Sascha Hauer
• [RFC PATCH 1/2] AM33XX: Move muxing defines to header file   Teresa Gámez
  • [RFC PATCH 1/2] AM33XX: Move muxing defines to header file   Sascha Hauer
    • [RFC PATCH 1/2] AM33XX: Move muxing defines to header file   Jan Lübbe
  • [RFC PATCH 1/2] AM33XX: Move muxing defines to header file   Sascha Hauer
• [RFC PATCH 2/2] AM33XX: pcm051: Create custom mux file   Teresa Gámez
• [PATCH 1/7] AT91 debug unit typo fix   Renaud C.
  • [PATCH 1/7] AT91 debug unit typo fix   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/7] AT91 debug unit typo fix   Cerrato Renaud
• [PATCH 2/7] Watchdog driver for AT91SAM9 SOC   Renaud C.
  • [PATCH 2/7] Watchdog driver for AT91SAM9 SOC   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] AT91 UDC startup fix   Renaud C.
  • [PATCH 3/7] AT91 UDC startup fix   Cerrato Renaud
• [PATCH 4/7] AT91 UDC, fix recursive poll()   Renaud C.
  • [PATCH 4/7] AT91 UDC, fix recursive poll()   Cerrato Renaud
• [PATCH 5/7] gadget: possible null pointer dereference fix   Renaud C.
  • [PATCH 5/7] gadget: possible null pointer dereference fix   Cerrato Renaud
• [PATCH 6/7] DFU : disable state fix   Renaud C.
  • [PATCH 6/7] DFU : disable state fix   Cerrato Renaud
    • [PATCH 6/7] DFU : disable state fix   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] none   Renaud C.
• [PATCH RESEND] usb: chipidea-imx: Fix usb initialization   Alexander Shiyan
  • [PATCH RESEND] usb: chipidea-imx: Fix usb initialization   Sascha Hauer
• [PATCH 1/1] splash: fix background color support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] splash: fix background color support   Sascha Hauer
• [PATCH 1/1] defaultenv-2: move settings in a submenu   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] defaultenv-2: move settings in a submenu   Sascha Hauer
• [PATCH 1/2] net: macb: remove gem_recv and reorder probe   Steffen Trumtrar
  • [PATCH 2/2] net: macb: turn off endian_swp_pkt_en   Steffen Trumtrar
    • [PATCH 2/2] net: macb: turn off endian_swp_pkt_en   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 2/2] net: macb: turn off endian_swp_pkt_en   Steffen Trumtrar
  • [PATCH 1/2] net: macb: remove gem_recv and reorder probe   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/2] net: macb: remove gem_recv and reorder probe   Steffen Trumtrar
      • [PATCH 1/2] net: macb: remove gem_recv and reorder probe   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/2] net: macb: remove gem_recv and reorder probe   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 1/2] net: macb: remove gem_recv and reorder probe   Sascha Hauer
      • [PATCH 1/2] net: macb: remove gem_recv and reorder probe   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 1/2] net: macb: remove gem_recv and reorder probe   Steffen Trumtrar
      • [PATCH 1/2] net: macb: remove gem_recv and reorder probe   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] [ARM] imx1: add #define to configure frequency for the clk32   Gwenhael Goavec-Merou
  • [PATCH] [ARM] imx1: add #define to configure frequency for the clk32   Sascha Hauer
    • [PATCH] [ARM] imx1: add #define to configure frequency for the clk32   gwenhael.goavec
      • [PATCH] [ARM] imx1: add #define to configure frequency for the clk32   Sascha Hauer
• [PATCH] net: macb: initialize is_gem before usage   Steffen Trumtrar
  • [PATCH] net: macb: initialize is_gem before usage   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] at91: debug unit typo fix   Cerrato Renaud
  • [PATCH 1/5] at91: debug unit typo fix   Sascha Hauer
• [PATCH 2/5] at91udc: startup fix   Cerrato Renaud
• [PATCH 3/5] at91udc: fix recursive poll()   Cerrato Renaud
• [PATCH 4/5] gadget: possible null pointer dereference fix   Cerrato Renaud
  • [PATCH 4/5] gadget: possible null pointer dereference fix   Sascha Hauer
    • [PATCH 4/5] gadget: possible null pointer dereference fix   Cerrato Renaud
      • [PATCH 4/5] gadget: possible null pointer dereference fix   Sascha Hauer
• [PATCH 5/5] dfu: usb reset state workaround   Cerrato Renaud
• [PATCH 1/1] macb: fix gem_recv circular buffer handling   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] macb: fix gem_recv circular buffer handling   Steffen Trumtrar
    • [PATCH 1/1] macb: fix gem_recv circular buffer handling   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7 v2] globalvar: add multiple device support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/7] params: allow to access first sub-device and params via env   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/7] globalvar: allow to register multiple device   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/7] globalvar: add it's own bus   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/7] net: switch to global device   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/7] dhcp: switch globalvar to it's own device   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 6/7] bootm: switch globalvar to it's own device   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 7/7] bootargs: switch globalvar to it's own device   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 0/7 v2] globalvar: add multiple device support   Sascha Hauer
• Loading kernel from SPI NOR   Jeff Horn
  • Loading kernel from SPI NOR   Sascha Hauer
• [PATCH] ARM i.MX ESDCTL: Fix default enabled esdctl v2 controller   Sascha Hauer
• [PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2   Alexander Shiyan
  • [PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2   Sascha Hauer
• [PATCH 2/2] arm: ccmx51: Using imx51_add_usbotg() function for register USB   Alexander Shiyan
• [PATCH] ARM: Add CPU detection macros for ARM720   Alexander Shiyan
  • [PATCH] ARM: Add CPU detection macros for ARM720   Sascha Hauer
• Omap4 DSS clocks   Christoph Fritz
  • Re: Omap4 DSS clocks   Alexander Shiyan
    • Omap4 DSS clocks   Christoph Fritz
      • Re[2]: Omap4 DSS clocks   Alexander Shiyan
      • Re[3]: Omap4 DSS clocks   Alexander Shiyan
      • Omap4 DSS clocks   Christoph Fritz
      • Omap4 DSS clocks   Sascha Hauer
      • Omap4 DSS clocks   Christoph Fritz
      • Omap4 DSS clocks   Christoph Fritz
      • Re[5]: Omap4 DSS clocks   Alexander Shiyan
      • Omap4 DSS clocks   Christoph Fritz
      • Re[7]: Omap4 DSS clocks   Alexander Shiyan
      • [PATCH] [RFC] ARM OMAP4: enable DSS by default   Christoph Fritz
• [PATCH 1/2] serial: fix flush in auart and stm driver   Marc Kleine-Budde
  • [PATCH 1/2] driver/serial: auart: fix flush   Marc Kleine-Budde
  • [PATCH 2/2] driver/serial: stm-serial: fix flush   Marc Kleine-Budde
  • [PATCH 1/2] serial: fix flush in auart and stm driver   Sascha Hauer
• [PATCH 00/10] make bootsource an arch independent framework   Marc Kleine-Budde
  • [PATCH 01/10] ARM i.MX bootsource: convert enums from enum imx_bootsource to uppercase   Marc Kleine-Budde
  • [PATCH 02/10] ARM i.MX bootsource: convert all imx*_boot_save_loc functions to void   Marc Kleine-Budde
  • [PATCH 03/10] ARM i.MX bootsource: imx_25_35_boot_save_loc: remove leftover do-nothing code   Marc Kleine-Budde
  • [PATCH 04/10] ARM i.MX bootsource: rename imx_27_boot_save_loc -> imx27_boot_save_loc   Marc Kleine-Budde
  • [PATCH 05/10] ARM i.MX bootsource: add separate function for mx25 and mx35   Marc Kleine-Budde
  • [PATCH 06/10] bootsource: create arch independent bootsource framework   Marc Kleine-Budde
  • [PATCH 07/10] bootsource: use initcall to export bootsource location to environment   Marc Kleine-Budde
  • [PATCH 08/10] bootsource: add support for bootsource instance information   Marc Kleine-Budde
  • [PATCH 09/10] bootsource: add definition for usb and eeprom   Marc Kleine-Budde
  • [PATCH 10/10] ARM: mxs: add bootsource detection   Marc Kleine-Budde
• [RFC 1/3] clk: Remove unneded private "parent" fields   Alexander Shiyan
  • [RFC 2/3] clk: Using the "is_enabled" to determine the clock state   Alexander Shiyan
    • [RFC 2/3] clk: Using the "is_enabled" to determine the clock state   Sascha Hauer
  • [RFC 3/3] clk: Add "is_enabled" callback for gated clocks   Alexander Shiyan
  • [RFC 1/3] clk: Remove unneded private "parent" fields   Sascha Hauer
    • Re[2]: [RFC 1/3] clk: Remove unneded private "parent" fields   Alexander Shiyan
• Shkëmbime Linqesh – Trafik i Vërtetë Falas   Sonila Cela
• [PATCH] clk: Add is_enabled callback   Sascha Hauer
  • Re: [PATCH] clk: Add is_enabled callback   Alexander Shiyan
    • [PATCH] clk: Add is_enabled callback   Sascha Hauer
• Video card photo Supply与您共享了相册。   Video card photo Supply
• /me on vacation   Sascha Hauer
• [PATCH] macb: rename platform data   Josh Cartwright
  • [PATCH] macb: rename platform data   Josh Cartwright
    • [PATCH] macb: rename platform data   Sascha Hauer
      • [PATCH] macb: rename platform data   Josh Cartwright
      • [PATCH] macb: rename platform data   Sascha Hauer
      • [PATCH RESEND] parameter: fix build warning when !CONFIG_PARAMETER   Josh Cartwright
• [PATCH 0/6] ArchosG9: add keyboard input and new reset menu entries (v2)   Vicente Bergas
  • [PATCH 1/6] OMAP4: check for usb availability at device registration   Vicente Bergas
  • [PATCH 2/6] ArchosG9: zero all features before setting them   Vicente Bergas
  • [PATCH 3/6] gpio_keys: detect keys pressed before booting   Vicente Bergas
  • [PATCH 4/6] OMAP4: add command to select next boot device priority   Vicente Bergas
    • [PATCH 4/6] OMAP4: add command to select next boot device priority   Sascha Hauer
  • [PATCH 5/6] ArchosG9: add keyboard input and new reset menu entries   Vicente Bergas
  • [PATCH 6/6] menu: avoid errors when building submenus   Vicente Bergas
  • [PATCH 0/6] ArchosG9: add keyboard input and new reset menu entries (v2)   Sascha Hauer
    • [PATCH 0/6] ArchosG9: add keyboard input and new reset menu entries (v2)   vj
• [PATCH v2 0/5] ARM: add support for Zynq   Steffen Trumtrar
  • [PATCH v2 1/5] serial: Add driver for Cadence UART   Steffen Trumtrar
    • [PATCH v2 1/5] serial: Add driver for Cadence UART   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v2 2/5] ARM: zynq: Add new architecture zynq   Steffen Trumtrar
    • [PATCH v2 2/5] ARM: zynq: Add new architecture zynq   Josh Cartwright
    • [PATCH v2 2/5] ARM: zynq: Add new architecture zynq   Josh Cartwright
      • [PATCH v2 2/5] ARM: zynq: Add new architecture zynq   Steffen Trumtrar
    • [PATCH v2 2/5] ARM: zynq: Add new architecture zynq   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000   Steffen Trumtrar
    • [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000   Josh Cartwright
      • [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000   Steffen Trumtrar
      • [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000   Josh Cartwright
  • [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard   Steffen Trumtrar
    • [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard   Josh Cartwright
      • [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard   Steffen Trumtrar
    • [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v2 0/5] ARM: add support for Zynq   Josh Cartwright
    • [PATCH v2 0/5] ARM: add support for Zynq   Steffen Trumtrar
      • [PATCH v2 0/5] ARM: add support for Zynq   Josh Cartwright
• [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script   Steffen Trumtrar
• Sparen Sie bei den Übersetzungen!   Global Translations and Typesetting
• [PATCH] cfa10036: Retrieve the RAM size at runtime   Alexandre Belloni
  • [PATCH] cfa10036: Retrieve the RAM size at runtime   Maxime Ripard
  • [PATCH] cfa10036: Retrieve the RAM size at runtime   Sascha Hauer
    • [PATCH] cfa10036: Retrieve the RAM size at runtime   Alexandre Belloni
      • [PATCH] cfa10036: Retrieve the RAM size at runtime   Maxime Ripard
• Propozim për shkëmbim linqesh falas   Bora Dervishi
• [PATCH v3 0/5] ARM: add support for Zynq   Steffen Trumtrar
  • [PATCH v3 1/5] serial: Add driver for Cadence UART   Steffen Trumtrar
  • [PATCH v3 2/5] ARM: zynq: Add new architecture zynq   Steffen Trumtrar
  • [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000   Steffen Trumtrar
  • [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script   Steffen Trumtrar
  • [PATCH v3 5/5] ARM: zynq: Add support for the Avnet Zedboard   Steffen Trumtrar
• [PATCH] clk: remove unused __clk_[get|put]   Sascha Hauer
• [PATCH] ubiformat: get buffer from malloc   Jan Weitzel
  • [PATCH] ubiformat: get buffer from malloc   Jan Weitzel
  • [PATCH] ubiformat: get buffer from malloc   Alexander Aring
    • [PATCH] ubiformat: get buffer from malloc   Alexander Aring
  • [PATCH] ubiformat: get buffer from malloc   Sascha Hauer
• [PATCH v4 0/5] ARM: add support for Zynq   Steffen Trumtrar
  • [PATCH v3 1/5] serial: Add driver for Cadence UART   Steffen Trumtrar
  • [PATCH v3 2/5] ARM: zynq: Add new architecture zynq   Steffen Trumtrar
    • [PATCH v3 2/5] ARM: zynq: Add new architecture zynq   Josh Cartwright
      • [PATCH v3 2/5] ARM: zynq: Add new architecture zynq   Steffen Trumtrar
  • [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000   Steffen Trumtrar
    • [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000   Josh Cartwright
      • [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000   Josh Cartwright
      • [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000   Michal Simek
  • [PATCH v3 4/5] ARM: zynq: add zynq fsbl checksum script   Steffen Trumtrar
  • [PATCH v3 5/5] ARM: zynq: Add support for the Avnet Zedboard   Steffen Trumtrar
  • [PATCH v4 0/5] ARM: add support for Zynq   Michal Simek
    • [PATCH v4 0/5] ARM: add support for Zynq   Steffen Trumtrar
      • [PATCH v4 0/5] ARM: add support for Zynq   Michal Simek
    • [PATCH v4 0/5] ARM: add support for Zynq   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v4 0/5] ARM: add support for Zynq   Sascha Hauer
• [PATCH 1/2] of/net: Add net related of helpers   Sascha Hauer
• [PATCH 2/2] net: fec: probe phy_mode from devicetree   Sascha Hauer
• [RFC PATCH 1/2] OMAP: Move bootsource functions   Teresa Gámez
• [RFC PATCH 2/2] OMAP: Add option to use enviroment from MMC   Teresa Gámez
  • [RFC PATCH 2/2] OMAP: Add option to use enviroment from MMC   Alexander Aring
    • [RFC PATCH 2/2] OMAP: Add option to use enviroment from MMC   Teresa Gamez
• [help] Calculation of size for nor_parts   Mylene Josserand
  • [help] Calculation of size for nor_parts   Eric Bénard
    • [help] Calculation of size for nor_parts   Mylene Josserand
• [PATCH v2] cfa10036: Retrieve the RAM size at runtime   Alexandre Belloni
  • [PATCH v2] cfa10036: Retrieve the RAM size at runtime   Maxime Ripard
  • [PATCH v2] cfa10036: Retrieve the RAM size at runtime   Sascha Hauer
• [PATCH] fb: calculate resource end   Jan Weitzel
• [PATCH] ARM: sabresd: move config-board out of /env/init   Hubert Feurstein
  • [PATCH] ARM: sabresd: move config-board out of /env/init   Sascha Hauer
• [PATCH] commands/tftp: use pr_debug for debug output   Hubert Feurstein
  • [PATCH] commands/tftp: use pr_debug for debug output   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] commands/tftp: use pr_debug for debug output   Sascha Hauer
      • [PATCH] commands/tftp: use pr_debug for debug output   Jean-Christophe PLAGNIOL-VILLARD
• Link Exchanges - Real Traffic For Free   Brooke Black
• Proposition for free link exchange   Angie Scott
• Link Suggestion (Proposal)   Yvonne Hazik
• Exchange Links For Free   Lauren Crawford
• IXP4xx again   Krzysztof Halasa
  • [PATCH] ARM: XScale processors don't support "clean+invalidate D entry" operation.   Krzysztof Halasa
  • [PATCH] Implement ALTERNATE memory layout.   Krzysztof Halasa
    • Re: [PATCH] Implement ALTERNATE memory layout.   Alexander Shiyan
      • [PATCH] Implement ALTERNATE memory layout.   Krzysztof Halasa
      • Re[2]: [PATCH] Implement ALTERNATE memory layout.   Alexander Shiyan
      • [PATCH] Implement ALTERNATE memory layout.   Krzysztof Halasa
    • [PATCH] Implement ALTERNATE memory layout.   Antony Pavlov
  • [PATCH] ARM: Add support for IXP4xx CPU and for Goramo Multilink router platform.   Krzysztof Halasa

Last message date: Sat Mar 30 15:57:13 EDT 2013
Archived on: Sat Mar 30 15:57:19 EDT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...