[PATCH v2 2/5] tegra: switch to ARMv7 cpu type

[Antony Pavlov]

Hi!

This commit breaks usb ethernet card on my board.

toshiba ac100> / usb
USB: scanning bus for devices...
Bus 001 Device 003: ID 0bdb:190a F3307
Bus 001 Device 004: ID 0bda:58f2 USB Camera
Bus 001 Device 005: ID 2001:3c05 DUB-E100
mdio_bus: miibus0: probed
eth0: got preset MAC address: 1C:7E:E5:0F:E1:14
Bus 001 Device 002: ID 0424:2513
Bus 001 Device 001: ID 0000:0000 EHCI Host Controller
5 USB Device(s) found
toshiba ac100> / dhcp
100Mbps full duplex link detected
dhcp failed: error 1
dhcp: error 1
toshiba ac100>

The next branch with Sascha's 'usb: ehci: initialize ehci_data' patch
works fine.

On 7 March 2013 14:33, Lucas Stach <dev at lynxeye.de> wrote:
> Main barebox is running on the A9 cluster. Use the correct ISA.
>
> Signed-off-by: Lucas Stach <dev at lynxeye.de>
> ---
>  arch/arm/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 7ac134e..5dbf74d 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -125,7 +125,7 @@ config ARCH_VEXPRESS
>
>  config ARCH_TEGRA
>         bool "Nvidia Tegra-based boards"
> -       select CPU_ARM926T
> +       select CPU_V7
>         select HAS_DEBUG_LL
>
>  endchoice
> --
> 1.8.1.2
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox



-- 
Best regards,
  Antony Pavlov