[PATCH 4/6] OMAP4: add command to select next boot device priority
Vicente Bergas
vicencb at gmail.com
Sat Mar 16 18:59:40 EDT 2013
On OMAP4 SoC there is a SAR memory region (Save & Rescue) where the ROM
code reads the device to boot from.
This patch adds a way to set this.
Signed-off-by: Vicente Bergas <vicencb at gmail.com>
---
arch/arm/mach-omap/include/mach/omap4-silicon.h | 20 +++++++
arch/arm/mach-omap/omap4_generic.c | 20 +++++++
commands/Kconfig | 5 ++
commands/Makefile | 1 +
commands/boot_order.c | 75 +++++++++++++++++++++++++
5 files changed, 121 insertions(+)
create mode 100644 commands/boot_order.c
diff --git a/arch/arm/mach-omap/include/mach/omap4-silicon.h b/arch/arm/mach-omap/include/mach/omap4-silicon.h
index 9e82435..666e721 100644
--- a/arch/arm/mach-omap/include/mach/omap4-silicon.h
+++ b/arch/arm/mach-omap/include/mach/omap4-silicon.h
@@ -161,6 +161,25 @@
#define OMAP44XX_PRM_RSTCTRL_RESET 0x01
/*
+ * SAR (Save & Rescue) memory region
+ */
+#define OMAP44XX_SAR_RAM_BASE 0x4a326000
+#define OMAP44XX_SAR_CH_ADDRESS (OMAP44XX_SAR_RAM_BASE + 0xA00)
+#define OMAP44XX_SAR_CH_START (OMAP44XX_SAR_RAM_BASE + 0xA0C)
+#define OMAP44XX_SAR_BOOT_VOID 0x00
+#define OMAP44XX_SAR_BOOT_XIP 0x01
+#define OMAP44XX_SAR_BOOT_XIPWAIT 0x02
+#define OMAP44XX_SAR_BOOT_NAND 0x03
+#define OMAP44XX_SAR_BOOT_ONENAND 0x04
+#define OMAP44XX_SAR_BOOT_MMC1 0x05
+#define OMAP44XX_SAR_BOOT_MMC2_1 0x06
+#define OMAP44XX_SAR_BOOT_MMC2_2 0x07
+#define OMAP44XX_SAR_BOOT_UART 0x43
+#define OMAP44XX_SAR_BOOT_USB_1 0x45
+#define OMAP44XX_SAR_BOOT_USB_ULPI 0x46
+#define OMAP44XX_SAR_BOOT_USB_2 0x47
+
+/*
* Non-secure SRAM Addresses
* Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
* at 0x40304000(EMU base) so that our code works for both EMU and GP
@@ -212,6 +231,7 @@ void omap4_ddr_init(const struct ddr_regs *, const struct dpll_param *);
void omap4_power_i2c_send(u32);
unsigned int omap4_revision(void);
noinline int omap4_scale_vcores(unsigned vsel0_pin);
+void omap4_set_warmboot_order(u32 *device_list);
#endif
diff --git a/arch/arm/mach-omap/omap4_generic.c b/arch/arm/mach-omap/omap4_generic.c
index 2a09eb6..e062332 100644
--- a/arch/arm/mach-omap/omap4_generic.c
+++ b/arch/arm/mach-omap/omap4_generic.c
@@ -41,6 +41,26 @@ void __noreturn reset_cpu(unsigned long addr)
while (1);
}
+void omap4_set_warmboot_order(u32 *device_list)
+{
+ const u32 CH[] = {
+ 0xCF00AA01,
+ 0x0000000C,
+ (device_list[0] << 16) | 0x0000,
+ (device_list[2] << 16) | device_list[1],
+ 0x0000 | device_list[3],
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(CH); i++)
+ writel(CH[i], OMAP44XX_SAR_CH_START + i*sizeof(CH[0]));
+ writel(OMAP44XX_SAR_CH_START, OMAP44XX_SAR_CH_ADDRESS);
+}
+
#define WATCHDOG_WSPR 0x48
#define WATCHDOG_WWPS 0x34
diff --git a/commands/Kconfig b/commands/Kconfig
index 0062758..524f00e 100644
--- a/commands/Kconfig
+++ b/commands/Kconfig
@@ -474,6 +474,11 @@ config CMD_POWEROFF
depends on HAS_POWEROFF
prompt "poweroff"
+config CMD_BOOT_ORDER
+ tristate
+ depends on ARCH_OMAP4
+ prompt "boot_order"
+
config CMD_GO
tristate
prompt "go"
diff --git a/commands/Makefile b/commands/Makefile
index 0ae6b95..428da57 100644
--- a/commands/Makefile
+++ b/commands/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_CMD_SLEEP) += sleep.o
obj-$(CONFIG_CMD_MSLEEP) += msleep.o
obj-$(CONFIG_CMD_RESET) += reset.o
obj-$(CONFIG_CMD_POWEROFF) += poweroff.o
+obj-$(CONFIG_CMD_BOOT_ORDER) += boot_order.o
obj-$(CONFIG_CMD_GO) += go.o
obj-$(CONFIG_NET) += net.o
obj-$(CONFIG_CMD_PARTITION) += partition.o
diff --git a/commands/boot_order.c b/commands/boot_order.c
new file mode 100644
index 0000000..66b87bc
--- /dev/null
+++ b/commands/boot_order.c
@@ -0,0 +1,75 @@
+/*
+ * boot_order.c - configure omap warm boot
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <complete.h>
+#include <mach/omap4-silicon.h>
+
+struct bootsrc {
+ const char *name;
+ uint32_t sar;
+};
+
+static int cmd_boot_order(int argc, char *argv[])
+{
+ const struct bootsrc src_list[] = {
+ {"xip" , OMAP44XX_SAR_BOOT_XIP },
+ {"xipwait" , OMAP44XX_SAR_BOOT_XIPWAIT },
+ {"nand" , OMAP44XX_SAR_BOOT_NAND },
+ {"onenand" , OMAP44XX_SAR_BOOT_ONENAND },
+ {"mmc1" , OMAP44XX_SAR_BOOT_MMC1 },
+ {"mmc2_1" , OMAP44XX_SAR_BOOT_MMC2_1 },
+ {"mmc2_2" , OMAP44XX_SAR_BOOT_MMC2_2 },
+ {"uart" , OMAP44XX_SAR_BOOT_UART },
+ {"usb_1" , OMAP44XX_SAR_BOOT_USB_1 },
+ {"usb_ulpi", OMAP44XX_SAR_BOOT_USB_ULPI},
+ {"usb_2" , OMAP44XX_SAR_BOOT_USB_2 },
+ };
+ uint32_t device_list[] = {
+ OMAP44XX_SAR_BOOT_VOID,
+ OMAP44XX_SAR_BOOT_VOID,
+ OMAP44XX_SAR_BOOT_VOID,
+ OMAP44XX_SAR_BOOT_VOID,
+ };
+ int i, j;
+
+ for (i = 0; i + 1 < argc && i < ARRAY_SIZE(device_list); i++) {
+ for (j = 0; j < ARRAY_SIZE(src_list); j++) {
+ if (strcmp(argv[i + 1], src_list[j].name) == 0) {
+ device_list[i] = src_list[j].sar;
+ break;
+ }
+ }
+ }
+ if (device_list[0] == OMAP44XX_SAR_BOOT_VOID) {
+ printf("First boot device can't be void\n");
+ return COMMAND_ERROR_USAGE;
+ }
+ omap4_set_warmboot_order(device_list);
+ return 0;
+}
+
+static const __maybe_unused char cmd_boot_order_help[] =
+"Usage: boot_order <device 1> [<device n>]\n"
+"Set warm boot order of up to four devices.\n"
+"Each device can be one of:\n"
+"xip xipwait nand onenand mmc1 mmc2_1 mmc2_2 uart usb_1 usb_ulpi usb_2\n";
+
+BAREBOX_CMD_START(boot_order)
+ .cmd = cmd_boot_order,
+ .usage = "boot_order <device 1> [<device n>]",
+ BAREBOX_CMD_HELP(cmd_boot_order_help)
+ BAREBOX_CMD_COMPLETE(empty_complete)
+BAREBOX_CMD_END
--
1.8.2
More information about the barebox
mailing list