[PATCH 0/5] Zynq support for barebox

[Steffen Trumtrar]

On Fri, Mar 08, 2013 at 10:10:11AM -0600, Josh Cartwright wrote:
> On Fri, Mar 08, 2013 at 07:39:18AM +0100, Steffen Trumtrar wrote:
> > On Thu, Mar 07, 2013 at 04:46:25PM -0600, Josh Cartwright wrote:
> > > On Wed, Mar 06, 2013 at 06:28:50PM +0100, Steffen Trumtrar wrote:
> > > > On Tue, Mar 05, 2013 at 11:09:29AM -0600, Josh Cartwright wrote:
> > > [..]
> > > > > > I have some patches laying around, that have support for booting first stage
> > > > > > from a SD-Card on a ZedBoard. I didn't send them as of yet, because I'm not
> > > > > > completely satisfied with them in one or two places. (The clocksource seems to
> > > > > > be inverse to what barebox expects, which would be a quick fix, and barebox boots
> > > > > > uuultra slow, if I do everything according to the TRM)
> > > > > > At the moment, I do not have access to the board though. But I hope I can get a
> > > > > > hand on it in the next days.
> > > > > 
> > > > > If you have a chance to send out what you have, I'd be curious to see
> > > > > it.  Fortunately I have several Zynq boards to play with.
> > > > > 
> > > > 
> > > > Hi!
> > > > 
> > > > Have a look at
> > > > http://git.pengutronix.de/?p=str/barebox.git;a=summary
> > > > 
> > > > I "stole" your clk driver and added it to my patch stack :-)
> > > > Current state for ZedBoard:
> > > > 	- boot first stage from SD-Card
> > > > 		- barebox.bin needs to be processed with
> > > > 		./scripts/zynq_checksum barebox.bin BOOT.bin
> > > > 		to have the checksum in the BootROM header
> > > > 	- clocksource is arm_smp_tmd at seems accurate
> > > > 	- the BootROM needs about 4-5 seconds to copy barebox from
> > > > 	  SD to the OCM. I guess, I need to mess with the SD setup
> > > > 	  in the BootROM somehow
> > > > 	- just enough clkdev to use the timer
> > > > 	- all pinctrl, clk setup etc happens in the lowlevel init
> > 
> > Hi Josh!
> > 
> > > Hey Steffen-
> > > 
> > > Thanks for sharing this! I'll be looking to get board support for the
> > > zc702 on top of your work this weekend (I have several Zynq boards, but
> > > none of them are ZedBoards).  I'm also in the process of porting the
> > > uboot zynq_gem driver.
> > 
> > First, \o/. I don't know how the two differ. But I would guess, that
> > you can pretty much copy the lowlevel stuff et al.
> > Only the DDR timing stuff may make problems.
> > 
> > Second: No! Don't! I'm trying to get drivers/net/macb.c running on Zynq.
> > As far as I can tell at the moment, this is a driver for a
> > Cadence IP gem. And the zynq uses exactly that IP core.
> > Alas, I have problems with the dma_alloc_coherent call in its
> > probe function.
> 
> Doh!  I certainly did not want to duplicate a driver unnecessarily.
> I'll keep this in mind going forward.
>

Just a quick note: it seems that the macb can be used. I didn't manage to
get a connection yet. But I can talk to the phy, get a link etc.

So, the linux macb driver should work two.

Regards,
Steffen


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |