[PATCH] net: macb: initialize is_gem before usage

[Jean-Christophe PLAGNIOL-VILLARD]

On 11:58 Wed 13 Mar     , Steffen Trumtrar wrote:
> The variable macb->is_gem is evaluated before it is initialized.
> That leads to a wrong rx_buffer setup in the gem case. Also, the
> function gem_recv will never be used.
> 
> Set the variable first and then use it.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> ---
>  drivers/net/macb.c | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 0cfad05..30e8476 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -619,11 +619,6 @@ static int macb_probe(struct device_d *dev)
>  
>  	macb->phy_flags = pdata->phy_flags;
>  
> -	macb_init_rx_buffer_size(macb, PKTSIZE);
> -	macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
> -	macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
> -	macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
> -
>  	macb->regs = dev_request_mem_region(dev, 0);
>  
>  	/*
> @@ -638,11 +633,17 @@ static int macb_probe(struct device_d *dev)
>  
>  	clk_enable(macb->pclk);
>  
> +	macb->is_gem = read_is_gem(macb);
> +
> +	macb_init_rx_buffer_size(macb, PKTSIZE);
> +	macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
> +	macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
> +	macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
> +

I check you need to update the gem_recv at the same time otherwise this brake
the sama5 support

Best Regards,
J.
>  	if (macb_is_gem(macb))
>  		edev->recv = gem_recv;
>  	else
>  		edev->recv = macb_recv;
> -	macb->is_gem = read_is_gem(macb);
>  
>  	macb_reset_hw(macb);
>  	ncfgr = macb_mdc_clk_div(macb);
> -- 
> 1.8.2.rc2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox