[PATCH 1/1] macb: fix gem_recv circular buffer handling
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Thu Mar 14 11:47:51 EDT 2013
On 20:13 Wed 13 Mar , Steffen Trumtrar wrote:
> On Wed, Mar 13, 2013 at 04:39:40PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > as we use a full buffer no need to check the SOF
> > and reset the rx_tail
> >
> > fix at the same time the gem detection so we can have the rx_buffer
> > allocated correctly according to the IP
> >
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Sascah
> > ---
> > drivers/net/macb.c | 32 ++++++++++++++++----------------
> > 1 file changed, 16 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> > index 0cfad05..2d4e373 100644
> > --- a/drivers/net/macb.c
> > +++ b/drivers/net/macb.c
> > @@ -172,7 +172,6 @@ static void reclaim_rx_buffers(struct macb_device *macb,
> > static int gem_recv(struct eth_device *edev)
> > {
> > struct macb_device *macb = edev->priv;
> > - unsigned int rx_tail = macb->rx_tail;
> > void *buffer;
> > int length;
> > u32 status;
> > @@ -181,20 +180,20 @@ static int gem_recv(struct eth_device *edev)
> >
> > for (;;) {
> > barrier();
> > - if (!(macb->rx_ring[rx_tail].addr & MACB_BIT(RX_USED)))
> > + if (!(macb->rx_ring[macb->rx_tail].addr & MACB_BIT(RX_USED)))
> > return -1;
> >
> > barrier();
> > - status = macb->rx_ring[rx_tail].ctrl;
> > + status = macb->rx_ring[macb->rx_tail].ctrl;
> > length = MACB_BFEXT(RX_FRMLEN, status);
> > - if (status & MACB_BIT(RX_SOF)) {
> > - buffer = macb->rx_buffer + macb->rx_buffer_size * macb->rx_tail;
> > - net_receive(buffer, length);
> > - macb->rx_ring[rx_tail].ctrl &= ~MACB_BIT(RX_USED);
> > - barrier();
> > - }
> > - rx_tail++;
> > + buffer = macb->rx_buffer + macb->rx_buffer_size * macb->rx_tail;
> > + net_receive(buffer, length);
> > + macb->rx_ring[macb->rx_tail].addr &= ~MACB_BIT(RX_USED);
> > + barrier();
> > +
> > macb->rx_tail++;
> > + if (macb->rx_tail >= macb->rx_ring_size)
> > + macb->rx_tail = 0;
> > }
> >
> > return 0;
> > @@ -619,11 +618,6 @@ static int macb_probe(struct device_d *dev)
> >
> > macb->phy_flags = pdata->phy_flags;
> >
> > - macb_init_rx_buffer_size(macb, PKTSIZE);
> > - macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
> > - macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
> > - macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
> > -
> > macb->regs = dev_request_mem_region(dev, 0);
> >
> > /*
> > @@ -638,11 +632,17 @@ static int macb_probe(struct device_d *dev)
> >
> > clk_enable(macb->pclk);
> >
> > + macb->is_gem = read_is_gem(macb);
> > +
> > if (macb_is_gem(macb))
> > edev->recv = gem_recv;
> > else
> > edev->recv = macb_recv;
> > - macb->is_gem = read_is_gem(macb);
> > +
> > + macb_init_rx_buffer_size(macb, PKTSIZE);
> > + macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
> > + macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
> > + macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
> >
> > macb_reset_hw(macb);
> > ncfgr = macb_mdc_clk_div(macb);
>
> I know that the last part is not a very sophisticated patch, but you could at least
> mention that I found the error and/or made part of this patch. Don't just
> pretend that you came up with this all alone.
sorry just did the diff between both tree and forget to add the Report-by
Sasha can you add it while applying?
Best Regards,
J.
>
> Regards,
> Steffen
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list