[PATCH 1/2] net: macb: remove gem_recv and reorder probe

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Wed Mar 13 05:32:11 EDT 2013


On Mar 13, 2013, at 5:19 PM, Steffen Trumtrar <s.trumtrar at pengutronix.de> wrote:

> On Wed, Mar 13, 2013 at 10:03:36AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
>> On 09:48 Wed 13 Mar     , Steffen Trumtrar wrote:
>>> The function gem_recv implements a buffer "ring" that stops at filling level 10.
>>> That means, when the driver is used as gem, it stops receiving after exactly
>>> 10 packets. Instead of implementing macb_recv twice, use it also for the gem
>>> part. If there needs to be an extra recv function for the gigabit case, it can
>>> be added than.
>>> Also, first set the type of device (macb or gem) and then use functions that
>>> use this info.
>>> 
>>> Tested on a Zynq7000.
>> NACK
>> 
>> on gem we can receive the packet in one buffer the gem_recv implement this
>> the macb can only receive splited buffer and then you have to reconstruct the
>> packet
>> 
> 
> Okay. That is nice and all. But try receiving more than just 10 packets with
> the current implementation.

yes the drivers bufferize only 10 packets in the DMA which should be enough for barebox
if we want we can increase the dma buffer size by increasing RX_NB_PACKET

Best Regards,
J.

> 
> Regards,
> str
> 
>> Best Regards,
>> J.
>>> 
>>> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
>>> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
>>> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
>>> ---
>>> drivers/net/macb.c | 47 +++++++----------------------------------------
>>> 1 file changed, 7 insertions(+), 40 deletions(-)
>>> 
>>> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
>>> index 8602437..a12eea7 100644
>>> --- a/drivers/net/macb.c
>>> +++ b/drivers/net/macb.c
>>> @@ -169,37 +169,6 @@ static void reclaim_rx_buffers(struct macb_device *macb,
>>> 	macb->rx_tail = new_tail;
>>> }
>>> 
>>> -static int gem_recv(struct eth_device *edev)
>>> -{
>>> -	struct macb_device *macb = edev->priv;
>>> -	unsigned int rx_tail = macb->rx_tail;
>>> -	void *buffer;
>>> -	int length;
>>> -	u32 status;
>>> -
>>> -	dev_dbg(macb->dev, "%s\n", __func__);
>>> -
>>> -	for (;;) {
>>> -		barrier();
>>> -		if (!(macb->rx_ring[rx_tail].addr & MACB_BIT(RX_USED)))
>>> -			return -1;
>>> -
>>> -		barrier();
>>> -		status = macb->rx_ring[rx_tail].ctrl;
>>> -		length = MACB_BFEXT(RX_FRMLEN, status);
>>> -		if (status & MACB_BIT(RX_SOF)) {
>>> -			buffer = macb->rx_buffer + macb->rx_buffer_size * macb->rx_tail;
>>> -			net_receive(buffer, length);
>>> -			macb->rx_ring[rx_tail].ctrl &= ~MACB_BIT(RX_USED);
>>> -			barrier();
>>> -		}
>>> -		rx_tail++;
>>> -		macb->rx_tail++;
>>> -	}
>>> -
>>> -	return 0;
>>> -}
>>> -
>>> static int macb_recv(struct eth_device *edev)
>>> {
>>> 	struct macb_device *macb = edev->priv;
>>> @@ -619,11 +588,6 @@ static int macb_probe(struct device_d *dev)
>>> 
>>> 	macb->phy_flags = pdata->phy_flags;
>>> 
>>> -	macb_init_rx_buffer_size(macb, PKTSIZE);
>>> -	macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
>>> -	macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
>>> -	macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
>>> -
>>> 	macb->regs = dev_request_mem_region(dev, 0);
>>> 
>>> 	/*
>>> @@ -638,12 +602,15 @@ static int macb_probe(struct device_d *dev)
>>> 
>>> 	clk_enable(macb->pclk);
>>> 
>>> -	if (macb_is_gem(macb))
>>> -		edev->recv = gem_recv;
>>> -	else
>>> -		edev->recv = macb_recv;
>>> 	macb->is_gem = read_is_gem(macb);
>>> 
>>> +	macb_init_rx_buffer_size(macb, PKTSIZE);
>>> +	macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
>>> +	macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
>>> +	macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
>>> +
>>> +	edev->recv = macb_recv;
>>> +
>>> 	macb_reset_hw(macb);
>>> 	ncfgr = macb_mdc_clk_div(macb);
>>> 	ncfgr |= MACB_BIT(PAE);		/* PAuse Enable */
>>> -- 
>>> 1.8.2.rc2
>>> 
>> 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




More information about the barebox mailing list