December 2012 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Dec 1 08:12:01 EST 2012
Ending: Sat Dec 29 05:08:17 EST 2012
Messages: 496

• how does barebox deal with more than one environment?   Robert P. J. Day
• how does barebox deal with more than one environment?   Robert P. J. Day
• how does barebox deal with more than one environment?   Antony Pavlov
• gunzip error when uncompress to buf   Jean-Christophe PLAGNIOL-VILLARD
• how does barebox deal with more than one environment?   Robert P. J. Day
• some quick wiki pages on barebox for my class(es)   Robert P. J. Day
• should i expect trying to mount a cramfs fs to give me a segmentation fault?   Robert P. J. Day
• suddenly, i can't boot barebox on my beagle xM anymore   Robert P. J. Day
• suddenly, i can't boot barebox on my beagle xM anymore   Robert P. J. Day
• suddenly, i can't boot barebox on my beagle xM anymore [ISOLATED]   Robert P. J. Day
• what is the function of "__barebox_early_initcalls_end"?   Robert P. J. Day
• [PATCH 0/2] clk: add always enabled clocks   Antony Pavlov
• [PATCH 1/2] clk: add always enabled clocks   Antony Pavlov
• [PATCH 2/2] commands: clk_dump: denote always enabled clocks   Antony Pavlov
• [PATCH] Makefile: move ctags and cscope support to a shell script   Antony Pavlov
• [PATCH] at25: use dev_lseek_default as at24 does   Antony Pavlov
• suddenly, i can't boot barebox on my beagle xM anymore [ISOLATED]   Jan Lübbe
• suddenly, i can't boot barebox on my beagle xM anymore [ISOLATED]   Robert P. J. Day
• [PATCH 3/5] mci: Allow to specify device name   Sascha Hauer
• [PATCH 2/5] mci: Fix capacity calculation for high capacity MMC cards   Sascha Hauer
• [PATCH] MIPS: fix out-of-tree build   Sascha Hauer
• [PATCH] omap: gpmc: mark hex debug values as such   Sascha Hauer
• suddenly, i can't boot barebox on my beagle xM anymore [ISOLATED]   Jan Lübbe
• suddenly, i can't boot barebox on my beagle xM anymore [ISOLATED]   Robert P. J. Day
• [Patch] ARM/MXS/i.MX28: distinguish POR and wake-up event correctly   Sascha Hauer
• suddenly, i can't boot barebox on my beagle xM anymore [ISOLATED]   Robert P. J. Day
• how does barebox deal with more than one environment?   Sascha Hauer
• should i expect trying to mount a cramfs fs to give me a segmentation fault?   Sascha Hauer
• suddenly, i can't boot barebox on my beagle xM anymore   Sascha Hauer
• [PATCH 0/2] clk: add always enabled clocks   Sascha Hauer
• suddenly, i can't boot barebox on my beagle xM anymore   Robert P. J. Day
• kbuild can't build foo/xxx.o   张忠山
• Howto known uncompressed length when uncompress_fd_to_buf   Sascha Hauer
• suddenly, i can't boot barebox on my beagle xM anymore   Sascha Hauer
• kbuild can't build foo/xxx.o   Sascha Hauer
• suddenly, i can't boot barebox on my beagle xM anymore   Robert P. J. Day
• [PATCH] Makefile: move ctags and cscope support to a shell script   Sascha Hauer
• [PATCH] at25: use dev_lseek_default as at24 does   Sascha Hauer
• suddenly, i can't boot barebox on my beagle xM anymore   Sascha Hauer
• [PATCH] correct simple typo, "plarform_init"   Robert P. J. Day
• suddenly, i can't boot barebox on my beagle xM anymore   Robert P. J. Day
• [PATCH] correct simple typo, "plarform_init"   Sascha Hauer
• [PATCH] ext4 filesystem support   Sascha Hauer
• [PATCH 1/4] ls command: call stat() only when necessary   Sascha Hauer
• [PATCH 2/4] filetype: Pass bufsize   Sascha Hauer
• [PATCH 3/4] add ext fs detection support   Sascha Hauer
• [PATCH 4/4] fs: implement initial ext4 support from U-Boot   Sascha Hauer
• [PATCH 1/2] ata: Add i.MX PATA driver support   Sascha Hauer
• [PATCH 2/2] ARM i.MX: Add i.MX51 PATA device support   Sascha Hauer
• suddenly, i can't boot barebox on my beagle xM anymore   Robert P. J. Day
• how does barebox deal with more than one environment?   Robert P. J. Day
• should i expect trying to mount a cramfs fs to give me a segmentation fault?   Robert P. J. Day
• how does one enable barebox's low-level debugging?   Robert P. J. Day
• how does one enable barebox's low-level debugging?   Sascha Hauer
• how does one enable barebox's low-level debugging?   Robert P. J. Day
• [PATCH 00/18] UBIFS support   Renaud Barbier
• [PATCH 01/18] fs/fs.c: check that fsdev->cdev->dev is not NULL   Renaud Barbier
• [PATCH 02/18] UBIFS: preparation   Renaud Barbier
• [PATCH 03/18] UBIFS: header files (1/2)   Renaud Barbier
• [PATCH 04/18] UBIFS: header files (2/2)   Renaud Barbier
• [PATCH 05/18] UBIFS: file operations   Renaud Barbier
• [PATCH 06/18] UBIFS: initialization   Renaud Barbier
• [PATCH 07/18] UBIFS: journal   Renaud Barbier
• [PATCH 08/18] UBIFS: I/O subsystem   Renaud Barbier
• [PATCH 09/18] UBIFS: LEB support   Renaud Barbier
• [PATCH 10/18] UBIFS: master node   Renaud Barbier
• [PATCH 11/18] UBIFS: recovery   Renaud Barbier
• [PATCH 12/18] UBIFS: tree node cache   Renaud Barbier
• [PATCH 13/18] UBIFS: superblock   Renaud Barbier
• [PATCH 14/18] UBIFS: scan   Renaud Barbier
• [PATCH 15/18] UBIFS: configuration and build directives   Renaud Barbier
• [PATCH 16/18] ubifs bad superblock bug   Renaud Barbier
• [PATCH 17/18] UBIFS: Improve error message when reading superblock failed   Renaud Barbier
• [PATCH 18/18] ubifs: Fix memory leak in ubifs_finddir   Renaud Barbier
• [PATCH] ARM i.MX bbu: Fix wrong buffer free   Sascha Hauer
• [PATCH] USB ulpi: pass return value   Sascha Hauer
• [PATCH 2/2] mtd core: call driver write function with complete buffer   Robert Jarzmik
• [PATCH 00/18] UBIFS support   Robert Jarzmik
• barebox initcalls for a beagle xM   Robert P. J. Day
• Nova CPE Krazer Sky Station 5GHz N - CPE Antena Integrada de 18dBi e Com Saída para Antena Externa   Vendas Krazer Technologies
• [PATCH] let kbuild build foo/bar.o correctly   张忠山
• Howto known uncompressed length when uncompress_fd_to_buf   张忠山
• what meaning of command function return val   张忠山
• what meaning of command function return val   Sascha Hauer
• Howto known uncompressed length when uncompress_fd_to_buf   Sascha Hauer
• Howto known uncompressed length when uncompress_fd_to_buf   张忠山
• [PATCH 00/18] UBIFS support   Renaud Barbier
• how does one enable barebox's low-level debugging?   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: added Kconfig option for -mno-unaligned compiler flag   Enrico Scholz
• [PATCH 2/2] OMAP: disable unaligned access when building the IFT   Enrico Scholz
• [PATCH] OMAP4: removed __packed__ annotation from pad_conf_entry   Enrico Scholz
• [PATCH] ARM: give more detailed information about data aborts   Enrico Scholz
• [PATCH] password: fixed underflow on <backspace>   Enrico Scholz
• how does one enable barebox's low-level debugging?   Robert P. J. Day
• apparent inconsistency in barebox doc content   Robert P. J. Day
• confused about "__PBL__" macro and whether it's actually used   Robert P. J. Day
• lots of inaccurate references to "FileName: include/asm-arm ..."   Robert P. J. Day
• how does one enable barebox's low-level debugging?   Jean-Christophe PLAGNIOL-VILLARD
• confused about "__PBL__" macro and whether it's actually used   Jean-Christophe PLAGNIOL-VILLARD
• confused about "__PBL__" macro and whether it's actually used   Robert P. J. Day
• [PATCH] net: phy: mdio_bus: fix inverted logic in mdio_bus_match   Jan Luebbe
• [PATCH] OMAP3: Replace magic GPIO numbers in omap3_generic.c with macros.   Robert P. J. Day
• lots of inaccurate references to "FileName: include/asm-arm ..."   menon.nishanth at gmail.com
• lots of inaccurate references to "FileName: include/asm-arm ..."   Robert P. J. Day
• lots of inaccurate references to "FileName: include/asm-arm ..."   menon.nishanth at gmail.com
• lots of inaccurate references to "FileName: include/asm-arm ..."   Robert P. J. Day
• [PATCH 00/18] UBIFS support   Robert Jarzmik
• lots of inaccurate references to "FileName: include/asm-arm ..."   Robert P. J. Day
• lots of inaccurate references to "FileName: include/asm-arm ..."   menon.nishanth at gmail.com
• lots of inaccurate references to "FileName: include/asm-arm ..."   Robert P. J. Day
• [PATCH] net: phy: mdio_bus: fix inverted logic in mdio_bus_match   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Remove old, inaccurate "FileName:" cruft from ARM files   Robert P. J. Day
• [PATCH 05/18] UBIFS: file operations   Sascha Hauer
• Howto known uncompressed length when uncompress_fd_to_buf   Sascha Hauer
• [PATCH] mach-omap/Kconfig: Some spelling fixes and indentation.   Robert P. J. Day
• [PATCH] OMAP4: removed __packed__ annotation from pad_conf_entry   Sascha Hauer
• [PATCH] OMAP3: Replace magic GPIO numbers in omap3_generic.c with macros.   Sascha Hauer
• [PATCH] password: fixed underflow on <backspace>   Sascha Hauer
• [PATCH] ARM: give more detailed information about data aborts   Sascha Hauer
• [PATCH 2/2] OMAP: disable unaligned access when building the IFT   Sascha Hauer
• [PATCH] ARM: give more detailed information about data aborts   Enrico Scholz
• [PATCH] mxs: get_fecclk is hclk, not a constant   Wolfram Sang
• [PATCH 2/2] OMAP: disable unaligned access when building the IFT   Enrico Scholz
• [PATCH] ARM: give more detailed information about data aborts   Sascha Hauer
• [PATCH] mxs: get_fecclk is hclk, not a constant   Sascha Hauer
• [PATCH 2/2] OMAP: disable unaligned access when building the IFT   Enrico Scholz
• [PATCH 00/18] UBIFS support   Renaud Barbier
• [PATCH 2/2] OMAP: disable unaligned access when building the IFT   Sascha Hauer
• what is the rationale for funny "0x100" offset for OMAP4 GPIO addresses?   Robert P. J. Day
• what is the rationale for funny "0x100" offset for OMAP4 GPIO addresses?   Sascha Hauer
• what is the rationale for funny "0x100" offset for OMAP4 GPIO addresses?   Robert P. J. Day
• [PATCH] Remove old, inaccurate "FileName:" cruft from ARM files   Nishanth Menon
• [PATCH 2/2] OMAP: disable unaligned access when building the IFT   Enrico Scholz
• what is the rationale for funny "0x100" offset for OMAP4 GPIO addresses?   Robert P. J. Day
• [PATCH 1/1] at91: fix debug_ll   Jean-Christophe PLAGNIOL-VILLARD
• what is the rationale for funny "0x100" offset for OMAP4 GPIO addresses?   Robert P. J. Day
• [PATCH] Define and use OMAP4 GPIO macros rather than magic constants.   Robert P. J. Day
• [PATCH] mxs: tx28: fix NAND usage   Wolfram Sang
• [PATCH 2/2] OMAP: disable unaligned access when building the IFT   Enrico Scholz
• [PATCH] mtd: nand: mxs: reset BCH earlier to avoid NAND startup problems   Wolfram Sang
• [PATCH 2/2] mtd core: call driver write function with complete buffer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] mtd: nand: fix unaligned write support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] net: phy: micrel: fix typo in driver name   Jan Luebbe
• [PATCH 1/1] mtd: nand: fix unaligned write support   Sascha Hauer
• [PATCH] mxs: tx28: fix NAND usage   Sascha Hauer
• [PATCH] mtd: nand: mxs: reset BCH earlier to avoid NAND startup problems   Sascha Hauer
• [PATCH] mtd: nand: mxs: reset BCH earlier to avoid NAND startup problems   Wolfram Sang
• [PATCH 1/1] at91: fix debug_ll   Sascha Hauer
• [PATCH] mtd: nand: mxs: reset BCH earlier to avoid NAND startup problems   Sascha Hauer
• [PATCH] Remove old, inaccurate "FileName:" cruft from ARM files   Sascha Hauer
• [PATCH] mach-omap/Kconfig: Some spelling fixes and indentation.   Sascha Hauer
• [PATCH] net: phy: micrel: fix typo in driver name   Sascha Hauer
• [PATCH] Define and use OMAP4 GPIO macros rather than magic constants.   Sascha Hauer
• [PATCH 1/5] mci: Add STUFF_BITS and use it   Sascha Hauer
• [PATCH V2] mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems   Wolfram Sang
• [PATCH V2] mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems   Sascha Hauer
• about the dm9000 in mini2440   Juergen Beisert
• [PATCH] at91: add_gpio_keys_device: fix missing conversion to DEVICE_ID_DYNAMIC   Antony Pavlov
• [RFC 0/2] clk: pass the 'flags' parameter to clk_fixed()   Antony Pavlov
• [RFC 1/2] clk: pass the 'flags' parameter to clk_fixed()   Antony Pavlov
• [RFC 2/2] ARM: pass the 'flags'=0 parameter to clk_fixed()   Antony Pavlov
• [PATCH] at91sam9260ek: fix BOARDINFO text   Fabio Porcedda
• [PATCH] at91: reorder BOARDINFO alphabetically   Fabio Porcedda
• about the dm9000 in mini2440   Juergen Beisert
• [PATCH v2] at91: reorder BOARDINFO alphabetically   Fabio Porcedda
• about the dm9000 in mini2440   Eric Bénard
• [PATCH] i.MX (and one generic) clock patches   Sascha Hauer
• [PATCH 1/6] ARM i.MX6: fix ethernet PLL rate   Sascha Hauer
• [PATCH 2/6] ARM i.MX6: rename PLLs according to datasheet   Sascha Hauer
• [PATCH 3/6] clk: Add clk table based divider support   Sascha Hauer
• [PATCH 4/6] ARM i.MX6 pllv3: Do not use delay functions   Sascha Hauer
• [PATCH 5/6] ARM i.MX6 clk: remove gate_mask from pllv3   Sascha Hauer
• [PATCH 6/6] ARM i.MX6: Add sata device   Sascha Hauer
• [PATCH] AHCI support   Sascha Hauer
• [PATCH 1/9] ata: register disks as /dev/ata*   Sascha Hauer
• [PATCH 2/9] ata: fix status flags   Sascha Hauer
• [PATCH 3/9] ata: split ide sff suport to separate file   Sascha Hauer
• [PATCH 4/9] ata: align ata command defines with kernel   Sascha Hauer
• [PATCH 5/9] ata: Use dma_alloc for buffer   Sascha Hauer
• [PATCH 6/9] ata: Add ahci support   Sascha Hauer
• [PATCH 7/9] mfd: Add i.MX6 iomux gpr header file   Sascha Hauer
• [PATCH 8/9] ata: Add i.MX AHCI driver   Sascha Hauer
• [PATCH 9/9] ARM i.MX5: Add SATA support   Sascha Hauer
• [PATCH] at91sam9260ek: fix BOARDINFO text   Sascha Hauer
• [PATCH] at91: add_gpio_keys_device: fix missing conversion to DEVICE_ID_DYNAMIC   Sascha Hauer
• [RFC 0/2] clk: pass the 'flags' parameter to clk_fixed()   Sascha Hauer
• about the dm9000 in mini2440   Yi Qingliang
• about the dm9000 in mini2440   Yi Qingliang
• [PATCH] clk: use the 'CLK_ALWAYS_ENABLED' flag for clk-fixed by default   Antony Pavlov
• [PATCH v2] at91: reorder BOARDINFO alphabetically   Sascha Hauer
• [PATCH v2] at91: reorder BOARDINFO alphabetically   Jean-Christophe PLAGNIOL-VILLARD
• v2012.12.0   Sascha Hauer
• [PATCH v2] at91: reorder BOARDINFO alphabetically   Sascha Hauer
• about the dm9000 in mini2440   Juergen Beisert
• about the dm9000 in mini2440   Juergen Beisert
• about the dm9000 in mini2440   Yi Qingliang
• about the dm9000 in mini2440   Juergen Beisert
• [PATCH v2] at91: reorder BOARDINFO alphabetically   Fabio Porcedda
• [PATCH] clk: use the 'CLK_ALWAYS_ENABLED' flag for clk-fixed by default   Sascha Hauer
• mdio_bus_match() bug   张忠山
• about the dm9000 in mini2440   Yi Qingliang
• about the dm9000 in mini2440   Yi Qingliang
• [PATCH 1/1] mtd: nand: fix unaligned write support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] at91: reorder BOARDINFO alphabetically   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] fix GENERIC_PHY match nothing   张忠山
• [PATCH] let kbuild build foo/bar.o correctly   张忠山
• [PATCH 1/8] Cleanup Kconfig files   Alexander Shiyan
• [PATCH 2/8] Remove bad Kconfig reference to HAS_CFI   Alexander Shiyan
• [PATCH 3/8] Remove bad Kconfig reference to HAVE_MMU   Alexander Shiyan
• [PATCH 4/8] Remove bad Kconfig reference to HAVE_CLK   Alexander Shiyan
• [PATCH 5/8] Remove bad Kconfig reference to DISK_DRIVE   Alexander Shiyan
• [PATCH 6/8] Remove bad Kconfig reference to HAS_PCI   Alexander Shiyan
• [PATCH 7/8] Remove bad Kconfig reference to MTD_NAND   Alexander Shiyan
• [PATCH 8/8] Fix wrong Kconfig reference to ARCH_IMX31   Alexander Shiyan
• [PATCH] Cleanup Kconfig files   Alexander Shiyan
• [PATCH v2] at91: reorder BOARDINFO alphabetically   Sascha Hauer
• [PATCH] fix GENERIC_PHY match nothing   Sascha Hauer
• [PATCH] Cleanup Kconfig files   Sascha Hauer
• [PATCH] let kbuild build foo/bar.o correctly   Sascha Hauer
• [PATCH] fix GENERIC_PHY match nothing   Sascha Hauer
• [PATCH 1/8] Cleanup Kconfig files   Sascha Hauer
• [PATCH 2/2] phy: add smsc phy driver support   Sascha Hauer
• [PATCH] fixes   Sascha Hauer
• [PATCH 1/4] ARM startup: Ensure CR_A flag is cleared on architectures >= ARMv6   Sascha Hauer
• [PATCH 2/4] ARM omap3: Call common_reset   Sascha Hauer
• [PATCH 3/4] net phylib: Clear BMCR_PDOWN bit   Sascha Hauer
• [PATCH 4/4] net phylib: Call phy_update_status when no link is present   Sascha Hauer
• v2012.12.0   Thomas Petazzoni
• [RFC 04/10] devfs & mtd: add MEMERASE ioctl support   Wolfram Sang
• [RFC 09/10] lib: add barebox version of libmtd   Wolfram Sang
• [RFC 10/10] commands: add ubiformat   Wolfram Sang
• [PATCH] fix GENERIC_PHY match nothing   张忠山
• [PATCH 00/10] add ubiformat command   Wolfram Sang
• [PATCH 01/10] mtd: move is_power_of_2() to a public place   Wolfram Sang
• [PATCH 02/10] ubi: consolidate ubi-media.h   Wolfram Sang
• [PATCH 03/10] ubi: bump ubi-media.h to newest version   Wolfram Sang
• [PATCH 04/10] devfs & mtd: add MEMERASE ioctl support   Wolfram Sang
• [PATCH 05/10] mtd: utils: apply macros for message printouts   Wolfram Sang
• [PATCH 06/10] lib: add ubiutils-common   Wolfram Sang
• [PATCH 07/10] lib: add libscan   Wolfram Sang
• [PATCH 08/10] lib: add libubigen   Wolfram Sang
• [PATCH 09/10] lib: add barebox version of libmtd   Wolfram Sang
• [PATCH 10/10] commands: add ubiformat   Wolfram Sang
• v2012.12.0   Jean-Christophe PLAGNIOL-VILLARD
• v2012.12.0   Thomas Petazzoni
• [PATCH] net: add multiple nameserver support   Christoph Fritz
• ethernet doesn't work after update to v2012.12.0   Wjatscheslaw Stoljarski (Slawa)
• ethernet doesn't work after update to v2012.12.0   Sascha Hauer
• [PATCH] esdctl: fix reset default bug on i.MX27/31   Sascha Hauer
• [PATCH 01/10] mtd: move is_power_of_2() to a public place   Sascha Hauer
• [PATCH 03/10] ubi: bump ubi-media.h to newest version   Sascha Hauer
• [PATCH 06/10] lib: add ubiutils-common   Sascha Hauer
• [PATCH 10/10] commands: add ubiformat   Sascha Hauer
• [PATCH 1/3] arm: omap: clocks: move CM_REG and PRM_REG macros   Jan Luebbe
• [PATCH 2/3] arm: omap: timers: split omap3/4 timer into a separate header   Jan Luebbe
• [PATCH 3/3] ARM OMAP AM33XX: create new ARCH for AM33xx   Jan Luebbe
• [PATCH 01/10] mtd: move is_power_of_2() to a public place   Wolfram Sang
• [PATCH] beaglebone: add first-stage support for AM335x and board   Jan Luebbe
• [PATCH 03/10] ubi: bump ubi-media.h to newest version   Wolfram Sang
• [PATCH 06/10] lib: add ubiutils-common   Wolfram Sang
• [PATCH 06/10] lib: add ubiutils-common   Sascha Hauer
• [PATCH 2/3] arm: omap: timers: split omap3/4 timer into a separate header   Teresa Gamez
• Add AM335x & BeagleBone support   Jan Luebbe
• [PATCH 1/4] arm: omap: clocks: move CM_REG and PRM_REG macros   Jan Luebbe
• [PATCH 2/4] arm: omap: timers: split omap3/4 timer into a separate header   Jan Luebbe
• [PATCH 3/4] ARM OMAP AM33XX: create new ARCH for AM33xx   Jan Luebbe
• [PATCH 4/4] arm: beaglebone: add first-stage support for AM335x and board   Jan Luebbe
• [PATCH] fix device tree corruption   Sascha Hauer
• [PATCH 1/2] fs: move dev_add_child before device_register   Sascha Hauer
• [PATCH 2/2] drivers/base: fix corrupt device tree   Sascha Hauer
• [PATCH 0/3] ARM: cfa10036: Load a different DTB depending on variants   Maxime Ripard
• [PATCH 1/3] ARM: cfa10036: Add the AT24HC02 I2C EEPROM   Maxime Ripard
• [PATCH 2/3] ARM: cfa10036: Retrieve the board variant from the AT24   Maxime Ripard
• [PATCH 3/3] ARM: cfa10036: Use the board variant to load a different device tree   Maxime Ripard
• [PATCH 2/3] ARM: cfa10036: Retrieve the board variant from the AT24   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] arm: omap: timers: split omap3/4 timer into a separate header   Sascha Hauer
• [PATCH 3/3] ARM OMAP AM33XX: create new ARCH for AM33xx   Sascha Hauer
• [PATCH] net phylib: force to wait for link   Sascha Hauer
• [PATCH 0/3] MIPS: add pre-bootloader (pbl) image support   Antony Pavlov
• [PATCH 1/3] MIPS: add pre-bootloader (pbl) image support   Antony Pavlov
• [PATCH 2/3] MIPS: qemu-malta: add trivial pbl support   Antony Pavlov
• [PATCH 3/3] MIPS: qemu-malta_defconfig: use pbl   Antony Pavlov
• stable update: v2012.12.1   Sascha Hauer
• [PATCH] i.MX31/pcm037 fixes and updates   Sascha Hauer
• [PATCH 01/10] ARM i.MX31: Fix gpio device names   Sascha Hauer
• [PATCH 02/10] ARM i.MX31 pcm037: Force internal phy   Sascha Hauer
• [PATCH 03/10] ARM i.MX31 pcm037: make board bootable again   Sascha Hauer
• [PATCH 04/10] ARM i.MX31 pcm037: remove unused defines   Sascha Hauer
• [PATCH 05/10] ARM i.MX31 pcm037: rewrite lowlevel init code in C   Sascha Hauer
• [PATCH 06/10] ARM i.MX31 pcm037: Switch to new environment   Sascha Hauer
• [PATCH 07/10] ARM i.MX31: sync iomux with kernel   Sascha Hauer
• [PATCH 08/10] ARM i.MX31 pcm037: add more iomux pins   Sascha Hauer
• [PATCH 09/10] ARM i.MX31: Add mmc register convenience functions   Sascha Hauer
• [PATCH 10/10] ARM i.MX31 pcm037: add mmc support   Sascha Hauer
• [PATCH 2/3] ARM: cfa10036: Retrieve the board variant from the AT24   Sascha Hauer
• [PATCHv2 0/3] ARM: cfa10036: Load a different DTB depending on variants   Maxime Ripard
• [PATCH 1/3] ARM: cfa10036: Add the AT24HC02 I2C EEPROM   Maxime Ripard
• [PATCH 2/3] ARM: cfa10036: Retrieve the board variant from the AT24   Maxime Ripard
• [PATCH 3/3] ARM: cfa10036: Use the board variant to load a different device tree   Maxime Ripard
• [PATCH] commands: add scrub   Wolfram Sang
• [PATCH] commands: add scrub   Wolfram Sang
• [PATCH] commands: flash: add missing newlines to error messages   Wolfram Sang
• [PATCH 0/2] allow scrubbing (erasing of bad blocks)   Wolfram Sang
• [PATCH 1/2] mtd: nand: add flag to ignore special handling of bad blocks   Wolfram Sang
• [PATCH 2/2] commands: add scrub   Wolfram Sang
• AM33xx support   Jan Luebbe
• [PATCH 01/14] ARM omap: remove unused function   Jan Luebbe
• [PATCH 02/14] ARM omap4: remove unused struct   Jan Luebbe
• [PATCH 03/14] ARM omap4: Add missing assembly protection in header file   Jan Luebbe
• [PATCH 04/14] ARM omap4: Add missing double include protection   Jan Luebbe
• [PATCH 05/14] ARM omap: Make gpmc base runtime configurable   Jan Luebbe
• [PATCH 06/14] ARM omap: Make timer base runtime configurable   Jan Luebbe
• [PATCH 07/14] ARM omap4: make PRM defines SoC specific   Jan Luebbe
• [PATCH 08/14] ARM omap3: make PRM defines SoC specific   Jan Luebbe
• [PATCH 09/14] ARM omap: Use SoC specific defines for gpmc and timer base   Jan Luebbe
• [PATCH 10/14] ARM omap: include individual SoC files   Jan Luebbe
• [PATCH 11/14] ARM OMAP AM33XX: create new ARCH for AM33xx   Jan Luebbe
• [PATCH 12/14] arm: omap: am33xx: add support for low level debug   Jan Luebbe
• [PATCH 13/14] arm: beaglebone: add first-stage support for AM335x and board   Jan Luebbe
• [PATCH 14/14] drivers: net: add driver for TI CPSW   Jan Luebbe
• [PATCH 0/9] introduction of dmesg support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/9] kfifo: introduce kfifo_dump_str to dump the fifo   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/9] console: switch to kfifo_dump_str   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/9] intoduce dmesg to print the barebox output ring buffer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/9] introduce printk support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] startup: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] console: allow to specify ouput kfifo size via CONSOLE_KFIFO_OUTPUT_SIZE   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] at91: clock switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] meminfo: switch to pr_xxx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] dev_printf: switch to pr_info   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] i.MX chipidea support   Sascha Hauer
• [PATCH 1/9] USB ehci: Allow to register independently from device   Sascha Hauer
• [PATCH 2/9] USB i.MX: Add chipidea driver support   Sascha Hauer
• [PATCH 3/9] ARM i.MX27: Add USB device functions   Sascha Hauer
• [PATCH 4/9] ARM i.MX51: Add USB device functions   Sascha Hauer
• [PATCH 5/9] ARM i.MX31: Add USB device functions   Sascha Hauer
• [PATCH 6/9] ARM i.MX pcm038: switch to chipidea support   Sascha Hauer
• [PATCH 7/9] pcm038: Stop ongoing ULPI transfers before registering the transceiver   Sascha Hauer
• [PATCH 8/9] fixup! USB i.MX: Add chipidea driver support   Sascha Hauer
• [PATCH 9/9] ARM i.MX pcm038: Update defconfig for chipidea driver   Sascha Hauer
• [PATCH] Efika MX Smartbook support   Sascha Hauer
• [PATCH 1/7] ata sff: set device pointer in ata port   Sascha Hauer
• [PATCH 2/7] mci: Allow to specify device name   Sascha Hauer
• [PATCH 3/7] mci i.MX esdhc: Allow to specify devicename from platformdata   Sascha Hauer
• [PATCH 4/7] mfd mc13893: Add register defines   Sascha Hauer
• [PATCH 5/7] ARM i.MX51: Add support for the Efika MX Smartbook   Sascha Hauer
• [PATCH 6/7] ARM: Add defconfig for Efika MX smartbook   Sascha Hauer
• [PATCH 7/7] USB ehci: Add powerup fixup for EfikaSB   Sascha Hauer
• [PATCH 0/3] MIPS: add pre-bootloader (pbl) image support   Sascha Hauer
• [PATCHv2 0/3] ARM: cfa10036: Load a different DTB depending on variants   Sascha Hauer
• [PATCH] commands: flash: add missing newlines to error messages   Sascha Hauer
• hush command output string   guenter.gebhardt at rafi.de
• hush command output string   Sascha Hauer
• Kit Cliente Atheros 5GHz 150Mbps AN 5.8 1T1R CPE SOFT Antena 18dBi ou 20dBi - NanoStation M5   Vendas Krazer Technologies
• [PATCH 1/9] kfifo: introduce kfifo_dump_str to dump the fifo   Sascha Hauer
• [PATCH 4/9] introduce printk support   Sascha Hauer
• [PATCH 0/9] introduction of dmesg support   Sascha Hauer
• [PATCH 5/7] ARM i.MX51: Add support for the Efika MX Smartbook   Sascha Hauer
• [PATCH 1/3] x86: Add formal Kconfig parameter "X86_BOOTLOADER"   Alexander Shiyan
• [PATCH 2/3] lib: Add formal Kconfig parameter "BCH_CONST_PARAMS"   Alexander Shiyan
• [PATCH 3/3] ARM: OMAP: Remove unneeded dependencies for GPMC   Alexander Shiyan
• [PATCH 2/3] lib: Add formal Kconfig parameter "BCH_CONST_PARAMS"   Robert Jarzmik
• [PATCH 0/9] introduction of dmesg support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/9] kfifo: introduce kfifo_dump_str to dump the fifo   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/9] introduce printk support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] USB ULPI updates   Sascha Hauer
• [PATCH 1/2] USB ULPI: Add missing ulpi_write function   Sascha Hauer
• [PATCH 2/2] USB ULPI: Add more register/bit defines   Sascha Hauer
• [PATCH 5/7] ARM i.MX51: Add support for the Efika MX Smartbook   Peter Korsgaard
• [PATCH] nand: mxs: NO_SUBPAGE_WRITE flag was overwritten   Wolfram Sang
• [PATCH V3 00/11] ubiformat for barebox   Wolfram Sang
• [PATCH V3 01/11] mtd: drop custom is_power_of_2()   Wolfram Sang
• [PATCH V3 02/11] lib: misc: add 'iB' suffixes to strtoull_suffix   Wolfram Sang
• [PATCH V3 03/11] lib: update size_human_readable to latest version   Wolfram Sang
• [PATCH V3 04/11] ubi: consolidate ubi-media.h   Wolfram Sang
• [PATCH V3 05/11] ubi: bump ubi-media.h to newest version   Wolfram Sang
• [PATCH V3 06/11] devfs & mtd: add MEMERASE ioctl support   Wolfram Sang
• [PATCH V3 07/11] mtd: utils: apply macros for message printouts   Wolfram Sang
• [PATCH V3 08/11] lib: add libscan   Wolfram Sang
• [PATCH V3 09/11] lib: add libubigen   Wolfram Sang
• [PATCH V3 10/11] lib: add barebox version of libmtd   Wolfram Sang
• [PATCH V3 11/11] commands: add ubiformat   Wolfram Sang
• [PATCH] ARM OMAP: add help text for OMAP_BUILD_IFT   barebox at lists.infradead.org
• v2012.12.0: pcm049 is broken   Teresa Gámez
• [PATCH 13/14] arm: beaglebone: add first-stage support for AM335x and board   Teresa Gámez
• [PATCH 0/7] Adding pcm051 support   Teresa Gámez
• [PATCH 1/7] ARM OMAP4: Add SRAM base define   Teresa Gámez
• [PATCH 2/7] ARM OMAP4: Add EHCI base define   Teresa Gámez
• [PATCH 3/7] ARM AM33XX: Add MMC Bases   Teresa Gámez
• [PATCH 4/7] ARM OMAP: Create device file   Teresa Gámez
• [PATCH 5/7] ARM OMAP: Use wrapper in board files   Teresa Gámez
• [PATCH 6/7] ARM AM33XX: Add mmc0 pin mux function   Teresa Gámez
• [PATCH 7/7] pcm051: Add inital support   Teresa Gámez
• AM33xx and BeagleBone support   Jan Luebbe
• [PATCH 01/19] ARM omap: remove unused function   Jan Luebbe
• [PATCH 02/19] ARM omap4: remove unused struct   Jan Luebbe
• [PATCH 03/19] ARM omap4: Add missing assembly protection in header file   Jan Luebbe
• [PATCH 04/19] ARM omap4: Add missing double include protection   Jan Luebbe
• [PATCH 05/19] ARM omap: Make gpmc base runtime configurable   Jan Luebbe
• [PATCH 06/19] ARM omap: Make timer base runtime configurable   Jan Luebbe
• [PATCH 07/19] ARM omap4: make PRM defines SoC specific   Jan Luebbe
• [PATCH 08/19] ARM omap3: make PRM defines SoC specific   Jan Luebbe
• [PATCH 09/19] ARM omap: Use SoC specific defines for gpmc and timer base   Jan Luebbe
• [PATCH 10/19] ARM omap: include individual SoC files   Jan Luebbe
• [PATCH 11/19] ARM omap: Add device register convenience functions   Jan Luebbe
• [PATCH 12/19] ARM omap3: Use device register functions in boards   Jan Luebbe
• [PATCH 13/19] ARM omap4: Use device register functions in boards   Jan Luebbe
• [PATCH 14/19] ARM omap hsmmc: Fix register offset   Jan Luebbe
• [PATCH 15/19] ARM omap3: Add change OMAP_ prefix to OMAP3_ for registers   Jan Luebbe
• [PATCH 16/19] ARM OMAP AM33XX: create new ARCH for AM33xx   Jan Luebbe
• [PATCH 17/19] arm: omap: am33xx: add support for low level debug   Jan Luebbe
• [PATCH 18/19] arm: beaglebone: add first-stage support for AM335x and board   Jan Luebbe
• [PATCH 19/19] drivers: net: add driver for TI CPSW   Jan Luebbe
• [PATCH 4/7] ARM OMAP: Create device file   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] nand: mxs: NO_SUBPAGE_WRITE flag was overwritten   Sascha Hauer
• Barebox under qemu for beagleboard   Jerzy Grzegorek
• [PATCH V3 00/11] ubiformat for barebox   Sascha Hauer
• [PATCH 18/19] arm: beaglebone: add first-stage support for AM335x and board   Teresa Gámez
• [PATCH 5/7] ARM i.MX51: Add support for the Efika MX Smartbook   Sascha Hauer
• [PATCH] ARM OMAP: add help text for OMAP_BUILD_IFT   Sascha Hauer
• [PATCH 1/3] x86: Add formal Kconfig parameter "X86_BOOTLOADER"   Sascha Hauer
• [PATCH 19/19] drivers: net: add driver for TI CPSW   Sascha Hauer
• [RFC 0/5] add ELF support   Antony Pavlov
• [RFC 1/5] resource: add create_resource() helper function   Antony Pavlov
• [RFC 2/5] bootm: add very basic ELF support (stolen from kexec)   Antony Pavlov
• [RFC 3/5] MIPS: add ELF support   Antony Pavlov
• [RFC 4/5] MIPS: qemu-malta: add board label   Antony Pavlov
• [RFC 5/5] MIPS: qemu-malta: add YAMON-style GT64120 memory map   Antony Pavlov
• [PATCH 0/2] gpiolib: add request and free support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] MFD MC34708: Add dependence on SPI   Wjatscheslaw Stoljarski (Slawa)
• [PATCHv2 0/6] Add PCM051 support   Teresa Gámez
• [PATCHv2 1/6] ARM AM33XX: Add mmc0 pin mux function   Teresa Gámez
• [PATCHv2 2/6] ARM OMAP: Add SRAM and DRAM to device register functions   Teresa Gámez
• [PATCHv2 3/6] ARM OMAP: Apply RAM device register functions to boards   Teresa Gámez
• [PATCHv2 4/6] ARM OMAP: Add EHCI to device register functions   Teresa Gámez
• [PATCHv2 5/6] ARM OMAP: Apply EHCI device register functions   Teresa Gámez
• [PATCHv2 6/6] pcm051: Add inital support   Teresa Gámez
• [PATCH 1/2] gpiolib: add gpio_request and gpio_free support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] gpiolib: add command to dump the current gpio status   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 3/6] ARM OMAP: Apply RAM device register functions to boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] at91: mux cleanup and switch to gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] at91: use gpio_is_valid to check gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] at91: use -EINVAL for invalid gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] at91: drop PIN_BASE offset for gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] at91: gpio: switch to device driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] at91: gpio: switch to ops   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] at91: switch to gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] allow scrubbing (erasing of bad blocks)   Marc Reilly
• [PATCH 1/2] gpiolib: add gpio_request and gpio_free support   Sascha Hauer
• [RFC 2/5] bootm: add very basic ELF support (stolen from kexec)   Sascha Hauer
• [RFC 3/5] MIPS: add ELF support   Sascha Hauer
• [PATCH 1/2] gpiolib: add gpio_request and gpio_free support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 2/5] bootm: add very basic ELF support (stolen from kexec)   Antony Pavlov
• Fwd: [RFC 3/5] MIPS: add ELF support   Antony Pavlov
• [PATCH] MFD MC34708: Add dependence on SPI   Sascha Hauer
• [PATCHv2 0/6] Add PCM051 support   Sascha Hauer
• [PATCH 0/2 v2] gpiolib: add request and free support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2 v2] gpiolib: add gpio_request and gpio_free support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] gpiolib: add command to dump the current gpio status   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] at91: mux cleanup and switch to gpiolib   Sascha Hauer
• [PATCH 0/2 v2] gpiolib: add request and free support   Sascha Hauer
• [PATCH 1/2] w1: gpio: use int for gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91: sam9x5el: use -EINVAL for invalid gpio on 1-wire   Jean-Christophe PLAGNIOL-VILLARD
• nand problem on mini2440   Baruch Siach
• nand problem on mini2440   Yi Qingliang
• nand problem on mini2440   Yi Qingliang
• [PATCH 1/2] at91sam9x5ek: switch heartbeat to d2 (pioD21)   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] led-gpio: use gpio_request and gpio_free   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91: add dump mux command   Jean-Christophe PLAGNIOL-VILLARD
• Barebox under qemu for beagleboard   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] atmel nand/spi/udc: request gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] mtd: atmel_nand: request and configure pio via gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] usb: at91_udc: request and configure vbus pin via gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] spi: atmel: request cs pin via gpiolib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/13] at91: cleanup and switch core driver to device/driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/13] at91: factorise dbgu address   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/13] at91: enable clock via clock framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/13] at91: factoryse PMC address as it's the same on every soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/13] at91: pmc: drop AT91_BASE_SYS   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/13] at91: introduce Kconfig to select the dbgu for lowlevel debug   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/13] at91: sync with the kernel address base   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/13] at91: at91sam9: provide its own clkdev for pit   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/13] at91: PIT: switch to platfrom_driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/13] at91: autodetect the soc one time at postcore_initcall   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/13] at91: SMC: switch to platfrom_driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/13] at91: wdt: drop AT91_SYS_BASE   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/13] at91: introduce AT91SAM9_SMC and AT91SAM9_TIMER   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/13] at91: drop AT91_BASE_PIOx for soc specific one for none boot code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7] at91: add bootstrap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] at91: add test commamd to emulate bootrom boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] at91sam926x: lowlevel add external boot support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] at91: sam926x: switch lowlevel param to c code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] at91: usb-a9263 add lowlevel init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] introduce common bootstrap code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] at91: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] at91: usb_a9263: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD

Last message date: Sat Dec 29 05:08:17 EST 2012
Archived on: Sat Dec 29 05:10:10 EST 2012

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...