[PATCH] i.MX chipidea support
Sascha Hauer
s.hauer at pengutronix.de
Thu Dec 13 12:00:35 EST 2012
The following adds support for the chipidea core of the i.MX SoCs.
It is somewhat designed after the kernel chipidea driver. A usb-misc
driver matches to the misc registers and allows a driver which binds
to the usb devices themselves to configure the misc registers. If ULPI
support is selected, the ULPI phy will be configured automatically.
This is done to simplify the board code for USB. Currently no support
for USB device is available, that could be added later. This series
also contains a patch which allows it to register a EHCI HCD without
matching to a device, which is needed for the chipidea support.
Sascha
----------------------------------------------------------------
Sascha Hauer (9):
USB ehci: Allow to register independently from device
USB i.MX: Add chipidea driver support
ARM i.MX27: Add USB device functions
ARM i.MX51: Add USB device functions
ARM i.MX31: Add USB device functions
ARM i.MX pcm038: switch to chipidea support
pcm038: Stop ongoing ULPI transfers before registering the transceiver
fixup! USB i.MX: Add chipidea driver support
ARM i.MX pcm038: Update defconfig for chipidea driver
arch/arm/boards/pcm038/pcm970.c | 42 +--
arch/arm/configs/pcm038_defconfig | 10 +-
arch/arm/mach-imx/devices.c | 5 +
arch/arm/mach-imx/imx27.c | 1 +
arch/arm/mach-imx/imx31.c | 1 +
arch/arm/mach-imx/imx51.c | 1 +
arch/arm/mach-imx/include/mach/devices-imx27.h | 15 +
arch/arm/mach-imx/include/mach/devices-imx31.h | 15 +
arch/arm/mach-imx/include/mach/devices-imx51.h | 15 +
arch/arm/mach-imx/include/mach/devices.h | 2 +
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 1 +
drivers/usb/host/ehci-hcd.c | 46 +--
drivers/usb/imx/Kconfig | 15 +
drivers/usb/imx/Makefile | 1 +
drivers/usb/imx/chipidea-imx.c | 91 ++++++
drivers/usb/imx/imx-usb-misc.c | 410 ++++++++++++++++++++++++
include/usb/chipidea-imx.h | 46 +++
include/usb/ehci.h | 17 +-
19 files changed, 683 insertions(+), 53 deletions(-)
create mode 100644 drivers/usb/imx/Kconfig
create mode 100644 drivers/usb/imx/Makefile
create mode 100644 drivers/usb/imx/chipidea-imx.c
create mode 100644 drivers/usb/imx/imx-usb-misc.c
create mode 100644 include/usb/chipidea-imx.h
More information about the barebox
mailing list