[PATCHv2 5/6] ARM OMAP: Apply EHCI device register functions

[Teresa Gámez]

Signed-off-by: Teresa Gámez <t.gamez at phytec.de>
---
 arch/arm/boards/beagle/board.c |    3 +--
 arch/arm/boards/panda/board.c  |    3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boards/beagle/board.c b/arch/arm/boards/beagle/board.c
index e0e1da6..88096bb 100644
--- a/arch/arm/boards/beagle/board.c
+++ b/arch/arm/boards/beagle/board.c
@@ -293,8 +293,7 @@ static int beagle_devices_init(void)
 
 #ifdef CONFIG_USB_EHCI_OMAP
 	if (ehci_omap_init(&omap_ehci_pdata) >= 0)
-		add_usb_ehci_device(DEVICE_ID_DYNAMIC, OMAP3_EHCI_BASE,
-				    OMAP3_EHCI_BASE + 0x10, &ehci_pdata);
+		omap3_add_ehci(&ehci_pdata);
 #endif /* CONFIG_USB_EHCI_OMAP */
 #ifdef CONFIG_OMAP_GPMC
 	/* WP is made high and WAIT1 active Low */
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index 8054a6a..4ca2a81 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -86,8 +86,7 @@ static void panda_ehci_init(void)
 	/* enable power to hub */
 	gpio_set_value(GPIO_HUB_POWER, 1);
 
-	add_usb_ehci_device(DEVICE_ID_DYNAMIC, 0x4a064c00,
-			    0x4a064c00 + 0x10, &ehci_pdata);
+	omap44xx_add_ehci(&ehci_pdata);
 }
 #else
 static void panda_ehci_init(void)
-- 
1.7.0.4