[PATCH 2/6] ARM i.MX6: rename PLLs according to datasheet

Sascha Hauer s.hauer at pengutronix.de
Thu Dec 6 08:29:44 EST 2012


In recent reference manuals the plls were renumbered. PLL8 now is
PLL6 and vice versa. Change the code according to the reference
manual to avoid confusion.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/mach-imx/clk-imx6.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6.c b/arch/arm/mach-imx/clk-imx6.c
index a1da47a..e2385ad 100644
--- a/arch/arm/mach-imx/clk-imx6.c
+++ b/arch/arm/mach-imx/clk-imx6.c
@@ -81,7 +81,7 @@ enum mx6q_clks {
 	gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
-	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
+	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	clk_max
 };
@@ -192,9 +192,9 @@ static int imx6_ccm_probe(struct device_d *dev)
 	clks[pll3_usb_otg]  = imx_clk_pllv3(IMX_PLLV3_USB,	"pll3_usb_otg",	"osc", base + 0x10, 0x2000,   0x3);
 	clks[pll4_audio]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"osc", base + 0x70, 0x2000,   0x7f);
 	clks[pll5_video]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x2000,   0x7f);
-	clks[pll6_mlb]      = imx_clk_pllv3(IMX_PLLV3_MLB,	"pll6_mlb",	"osc", base + 0xd0, 0x2000,   0x0);
+	clks[pll8_mlb]      = imx_clk_pllv3(IMX_PLLV3_MLB,	"pll8_mlb",	"osc", base + 0xd0, 0x2000,   0x0);
 	clks[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x2000,   0x3);
-	clks[pll8_enet]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll8_enet",	"osc", base + 0xe0, 0x182000, 0x3);
+	clks[pll6_enet]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll6_enet",	"osc", base + 0xe0, 0x182000, 0x3);
 
 	/*                                name               parent_name         reg          idx */
 	clks[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
-- 
1.7.10.4




More information about the barebox mailing list