Barebox under qemu for beagleboard

[Jean-Christophe PLAGNIOL-VILLARD]

On 12:44 Wed 19 Dec     , Jerzy Grzegorek wrote:
>    Hi,
> 
>    I was trying to run barebox-2012.12.1 under linaro-qemu 2012.12, for
>    beagleboard.
> 
>    I build MLO (omap3530_beagle_xload_defconfig) and barebox-flash-image
>    (omap3530_beagle_defconfig).
> 
>    I prepared two partitions sd image - beagle.sd.img (first partition FAT :
>    MLO, barebox.bin, barebox-flash-image, zImage;  second partition EXT3 :
>    rootfs).
> 
>    I run linaro-qemu
> 
>    qemu-system-arm -M beagle -m 256M -nographic -sd beagle.sd.img
> 
>    and I got
> 
>    barebox 2012.12.1 #1 Wed Dec 19 08:35:21 CET 2012
> 
>    Board: Texas Instrument's Beagle
>    NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba ( ), page size: 2048,
>    OOB size: 64
>    omap-hsmmc omap-hsmmc0: registered as omap-hsmmc0
>    mci mci0: registered disk0
>    malloc space: 0x87bfff10 -> 0x87ffff0f (size  4 MB)
>    stack space:  0x4020f000 -> 0x4020fc00 (size  3 kB)
>    unknown boot source. Fall back to nand
>    booting from NAND
>    failed to get image size
>    booting failed
> 
>    next qemu freezes.
> 
>    Any idea?
I guess qemu does not set the boot register correctly so barebox can not
detect that you want to boot from sd and falback to nand

Best Regards,
J.