[PATCH 00/13] at91: cleanup and switch core driver to device/driver
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Fri Dec 28 14:13:27 EST 2012
HI,
cleanup base addresses and start to drop AT91_BASE_SYS to allow
multiple arch at a time
switch code drivers to device/drivers
detect soc a at run time
The following changes since commit adbdc7cd87971b126838950e2dc5eaedfff943d7:
spi: atmel: request cs pin via gpiolib (2012-12-29 00:35:08 +0800)
are available in the git repository at:
git://git.jcrosoft.org/barebox.git delivery/at91_cleanup
for you to fetch changes up to 9f7f67ca887b26a4488edf5fa171a78e142e0a5b:
at91: drop AT91_BASE_PIOx for soc specific one for none boot code (2012-12-29 01:37:47 +0800)
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (13):
at91: factorise dbgu address
at91: enable clock via clock framework
at91: factoryse PMC address as it's the same on every soc
at91: pmc: drop AT91_BASE_SYS
at91: introduce Kconfig to select the dbgu for lowlevel debug
at91: sync with the kernel address base
at91: at91sam9: provide its own clkdev for pit
at91: PIT: switch to platfrom_driver
at91: autodetect the soc one time at postcore_initcall
at91: SMC: switch to platfrom_driver
at91: wdt: drop AT91_SYS_BASE
at91: introduce AT91SAM9_SMC and AT91SAM9_TIMER
at91: drop AT91_BASE_PIOx for soc specific one for none boot code
arch/arm/boards/at91sam9260ek/init.c | 5 +-
arch/arm/boards/at91sam9261ek/init.c | 5 +-
arch/arm/boards/at91sam9263ek/init.c | 3 +-
arch/arm/boards/at91sam9m10g45ek/init.c | 3 +-
arch/arm/boards/at91sam9n12ek/init.c | 5 +-
arch/arm/boards/at91sam9x5ek/init.c | 3 +-
arch/arm/boards/dss11/init.c | 9 ++-
arch/arm/boards/pm9261/init.c | 5 +-
arch/arm/boards/pm9263/init.c | 3 +-
arch/arm/boards/pm9g45/init.c | 3 +-
arch/arm/boards/qil-a9260/init.c | 3 +-
arch/arm/boards/tny-a926x/init.c | 5 +-
arch/arm/boards/usb-a926x/init.c | 5 +-
arch/arm/mach-at91/Kconfig | 114 ++++++++++++++++++++++------
arch/arm/mach-at91/Makefile | 21 +++---
arch/arm/mach-at91/at91rm9200.c | 25 +++---
arch/arm/mach-at91/at91rm9200_lowlevel_init.c | 18 +++--
arch/arm/mach-at91/at91sam9260.c | 24 +++---
arch/arm/mach-at91/at91sam9261.c | 24 +++---
arch/arm/mach-at91/at91sam9263.c | 29 +++----
arch/arm/mach-at91/at91sam926x_lowlevel_init.c | 28 +++----
arch/arm/mach-at91/at91sam926x_time.c | 68 +++++++++++++----
arch/arm/mach-at91/at91sam9g45.c | 29 ++++---
arch/arm/mach-at91/at91sam9n12.c | 26 +++----
arch/arm/mach-at91/at91sam9x5.c | 26 +++----
arch/arm/mach-at91/clock.c | 50 ++++++------
arch/arm/mach-at91/generic.h | 13 ++++
arch/arm/mach-at91/include/mach/at91_dbgu.h | 26 +++----
arch/arm/mach-at91/include/mach/at91_pit.h | 8 +-
arch/arm/mach-at91/include/mach/at91_pmc.h | 48 ++++++------
arch/arm/mach-at91/include/mach/at91_wdt.h | 6 +-
arch/arm/mach-at91/include/mach/at91rm9200.h | 22 ++++--
arch/arm/mach-at91/include/mach/at91sam9260.h | 37 ++++++---
arch/arm/mach-at91/include/mach/at91sam9261.h | 34 ++++++---
arch/arm/mach-at91/include/mach/at91sam9263.h | 52 ++++++++-----
arch/arm/mach-at91/include/mach/at91sam9_smc.h | 50 +++++++++---
arch/arm/mach-at91/include/mach/at91sam9g45.h | 44 +++++++----
arch/arm/mach-at91/include/mach/at91sam9n12.h | 43 +++++++----
arch/arm/mach-at91/include/mach/at91sam9x5.h | 43 +++++++----
arch/arm/mach-at91/include/mach/cpu.h | 190 ++++++++++++++++++++++------------------------
arch/arm/mach-at91/include/mach/debug_ll.h | 6 +-
arch/arm/mach-at91/include/mach/hardware.h | 8 ++
arch/arm/mach-at91/include/mach/sam9_smc.h | 33 --------
arch/arm/mach-at91/sam9_smc.c | 146 +++++++++++++++++++++++++++++------
arch/arm/mach-at91/setup.c | 226 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-at91/soc.h | 66 ++++++++++++++++
46 files changed, 1127 insertions(+), 513 deletions(-)
delete mode 100644 arch/arm/mach-at91/include/mach/sam9_smc.h
create mode 100644 arch/arm/mach-at91/setup.c
create mode 100644 arch/arm/mach-at91/soc.h
Best Regards,
J.
More information about the barebox
mailing list