[PATCH 5/7] ARM i.MX51: Add support for the Efika MX Smartbook
Sascha Hauer
s.hauer at pengutronix.de
Sat Dec 15 04:00:40 EST 2012
On Thu, Dec 13, 2012 at 10:49:08PM +0100, Sascha Hauer wrote:
> The Efika MX Smartbook is a i.MX51 based netbook. This patch adds
> nearly full support for it including:
>
> - USB
> - SD card slots
> - Internal SPI NOR flash
> - Internal flash PATA drive
> - LEDs
>
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
> arch/arm/Makefile | 1 +
> arch/arm/boards/efika-mx-smartbook/Makefile | 3 +
> arch/arm/boards/efika-mx-smartbook/board.c | 511 ++++++++++++++++++++
> arch/arm/boards/efika-mx-smartbook/config.h | 24 +
> arch/arm/boards/efika-mx-smartbook/dcd-data.h | 56 +++
> .../boards/efika-mx-smartbook/env/bin/lvds_init | 22 +
> .../boards/efika-mx-smartbook/env/boot/hd-internal | 17 +
> .../boards/efika-mx-smartbook/env/boot/mmc-left | 19 +
> arch/arm/boards/efika-mx-smartbook/env/config | 29 ++
> .../boards/efika-mx-smartbook/env/init/automount | 29 ++
> .../boards/efika-mx-smartbook/env/init/bootsource | 10 +
> .../efika-mx-smartbook/env/init/config-board | 9 +
> .../efika-mx-smartbook/env/network/eth0-discover | 4 +
> arch/arm/boards/efika-mx-smartbook/flash_header.c | 29 ++
> arch/arm/mach-imx/Kconfig | 8 +
> defaultenv-2/base/boot/net | 4 +-
> drivers/usb/core/usb.c | 8 +-
> drivers/usb/host/ehci-hcd.c | 6 +
> drivers/usb/otg/ulpi.c | 33 +-
> include/usb/ulpi.h | 43 +-
These USB related changes shouldn't be there. Will fix.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list