about the dm9000 in mini2440

[Juergen Beisert]

Yi Qingliang wrote:
> indeed, I encountered follow error when boot barebox (compiled with default
> cfg):
> dm9000 at dm90000: Wrong databus width defined at compile time
>
> and can't use it for tftp
>
> I have printed out the context, found that is 32bit in the dm9000 register
> (read only), but in mini2440 initialize code is 16bit.
>
> any suggestion?

This would mean the EED0 pin of the DM9000 has a pull up connected, which is 
not the case for the Mini2440. Are you sure, you are using an original 
Mini2440?

Regards,
Juergen

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-5121-206917-5128 |
Peiner Str. 6-8, 31137 Hildesheim, Germany    | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |