[PATCH 0/6] at91: mux cleanup and switch to gpiolib

[Sascha Hauer]

On Thu, Dec 20, 2012 at 03:29:02PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Hi,
> 
> 	this patch series update the mux api of the at91 and use a part of the
> 	pinctrl from the kernel and switch tot hte gpiolib
> 
> 	we also drop the fact taht a gpio is invalid if 0
> 
> 	This pull depends on the gpiolib one
> 
> The following changes since commit b1e244b763731fb16fee15a93f45fc8c5455628a:
> 
>   gpiolib: add command to dump the current gpio status (2012-12-18 23:09:05 +0800)

Applied, thanks

Sascha

> 
> are available in the git repository at:
> 
>   git://git.jcrosoft.org/barebox.git delivery/at91_gpio
> 
> for you to fetch changes up to 35fc9a4f9eb6eff72aa0bed5cad052f7e11a03ab:
> 
>   at91: switch to gpiolib (2012-12-18 23:09:08 +0800)
> 
> ----------------------------------------------------------------
> Jean-Christophe PLAGNIOL-VILLARD (6):
>       at91: use gpio_is_valid to check gpio
>       at91: use -EINVAL for invalid gpio
>       at91: drop PIN_BASE offset for gpio
>       at91: gpio: switch to device driver
>       at91: gpio: switch to ops
>       at91: switch to gpiolib
> 
>  arch/arm/Kconfig                         |    2 +-
>  arch/arm/boards/at91rm9200ek/init.c      |    1 +
>  arch/arm/boards/at91sam9260ek/init.c     |    3 +-
>  arch/arm/boards/at91sam9261ek/init.c     |    2 +-
>  arch/arm/boards/at91sam9263ek/init.c     |    4 +-
>  arch/arm/boards/at91sam9m10g45ek/init.c  |    2 +-
>  arch/arm/boards/at91sam9n12ek/init.c     |    4 +-
>  arch/arm/boards/at91sam9x5ek/init.c      |    2 +-
>  arch/arm/boards/dss11/init.c             |    3 +-
>  arch/arm/boards/mmccpu/init.c            |    2 +-
>  arch/arm/boards/pm9261/init.c            |    2 +-
>  arch/arm/boards/pm9263/init.c            |    4 +-
>  arch/arm/boards/pm9g45/init.c            |    6 +-
>  arch/arm/boards/qil-a9260/init.c         |    4 +-
>  arch/arm/boards/tny-a926x/init.c         |    4 +-
>  arch/arm/boards/usb-a926x/init.c         |    3 +-
>  arch/arm/mach-at91/at91rm9200.c          |   46 ++++++-------
>  arch/arm/mach-at91/at91rm9200_devices.c  |   10 +--
>  arch/arm/mach-at91/at91sam9260.c         |   34 ++++------
>  arch/arm/mach-at91/at91sam9260_devices.c |   14 ++--
>  arch/arm/mach-at91/at91sam9261.c         |   36 ++++------
>  arch/arm/mach-at91/at91sam9261_devices.c |   14 ++--
>  arch/arm/mach-at91/at91sam9263.c         |   44 +++++-------
>  arch/arm/mach-at91/at91sam9263_devices.c |   16 ++---
>  arch/arm/mach-at91/at91sam9g45.c         |   43 +++++-------
>  arch/arm/mach-at91/at91sam9g45_devices.c |   14 ++--
>  arch/arm/mach-at91/at91sam9n12.c         |   38 +++++------
>  arch/arm/mach-at91/at91sam9n12_devices.c |   14 ++--
>  arch/arm/mach-at91/at91sam9x5.c          |   38 +++++------
>  arch/arm/mach-at91/at91sam9x5_devices.c  |   14 ++--
>  arch/arm/mach-at91/generic.h             |   12 ++++
>  arch/arm/mach-at91/gpio.c                |  530 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------------
>  arch/arm/mach-at91/include/mach/board.h  |   12 ++--
>  arch/arm/mach-at91/include/mach/gpio.h   |  402 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------------------
>  drivers/mtd/nand/atmel_nand.c            |    4 +-
>  drivers/usb/gadget/at91_udc.c            |    4 +-
>  36 files changed, 773 insertions(+), 614 deletions(-)
> 
> Best Regards,
> J.
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |