[PATCH 09/10] lib: add barebox version of libmtd

Wolfram Sang w.sang at pengutronix.de
Mon Dec 10 03:14:14 EST 2012


Based on mtd-utils and stripped down to needed functionality and
reworked to barebox interfaces.

Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
---
 include/mtd/libmtd.h |  154 +++++++++++++++++++++
 lib/Kconfig          |    3 +
 lib/Makefile         |    1 +
 lib/libmtd.c         |  371 ++++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 529 insertions(+)
 create mode 100644 include/mtd/libmtd.h
 create mode 100644 lib/libmtd.c

diff --git a/include/mtd/libmtd.h b/include/mtd/libmtd.h
new file mode 100644
index 0000000..6267dac
--- /dev/null
+++ b/include/mtd/libmtd.h
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2008, 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Artem Bityutskiy
+ *
+ * MTD library.
+ */
+
+#ifndef __LIBMTD_H__
+#define __LIBMTD_H__
+
+/* Maximum MTD device name length */
+#define MTD_NAME_MAX 127
+/* Maximum MTD device type string length */
+#define MTD_TYPE_MAX 64
+
+/**
+ * struct mtd_dev_info - information about an MTD device.
+ * @node: node pointing to device
+ * @type: flash type (constants like %MTD_NANDFLASH defined in mtd-abi.h)
+ * @type_str: static R/O flash type string
+ * @name: device name
+ * @size: device size in bytes
+ * @eb_cnt: count of eraseblocks
+ * @eb_size: eraseblock size
+ * @min_io_size: minimum input/output unit size
+ * @subpage_size: sub-page size
+ * @oob_size: OOB size (zero if the device does not have OOB area)
+ * @region_cnt: count of additional erase regions
+ * @writable: zero if the device is read-only
+ * @bb_allowed: non-zero if the MTD device may have bad eraseblocks
+ */
+struct mtd_dev_info
+{
+	const char *node;
+	int type;
+	const char type_str[MTD_TYPE_MAX + 1];
+	long long size;
+	int eb_cnt;
+	int eb_size;
+	int min_io_size;
+	int subpage_size;
+	int oob_size;
+	int region_cnt;
+	unsigned int writable:1;
+	unsigned int bb_allowed:1;
+};
+
+/**
+ * mtd_get_dev_info - get information about an MTD device.
+ * @desc: MTD library descriptor
+ * @node: name of the MTD device node
+ * @mtd: the MTD device information is returned here
+ *
+ * This function gets information about MTD device defined by the @node device
+ * node file and saves this information in the @mtd object. Returns %0 in case
+ * of success and %-1 in case of failure. If MTD subsystem is not present in the
+ * system, or the MTD device does not exist, errno is set to @ENODEV.
+ */
+int mtd_get_dev_info(const char *node, struct mtd_dev_info *mtd);
+
+/**
+ * mtd_erase - erase an eraseblock.
+ * @desc: MTD library descriptor
+ * @mtd: MTD device description object
+ * @fd: MTD device node file descriptor
+ * @eb: eraseblock to erase
+ *
+ * This function erases eraseblock @eb of MTD device described by @fd. Returns
+ * %0 in case of success and %-1 in case of failure.
+ */
+int mtd_erase(const struct mtd_dev_info *mtd, int fd, int eb);
+
+/**
+ * mtd_torture - torture an eraseblock.
+ * @desc: MTD library descriptor
+ * @mtd: MTD device description object
+ * @fd: MTD device node file descriptor
+ * @eb: eraseblock to torture
+ *
+ * This function tortures eraseblock @eb. Returns %0 in case of success and %-1
+ * in case of failure.
+ */
+int mtd_torture(const struct mtd_dev_info *mtd, int fd, int eb);
+
+/**
+ * mtd_is_bad - check if eraseblock is bad.
+ * @mtd: MTD device description object
+ * @fd: MTD device node file descriptor
+ * @eb: eraseblock to check
+ *
+ * This function checks if eraseblock @eb is bad. Returns %0 if not, %1 if yes,
+ * and %-1 in case of failure.
+ */
+int mtd_is_bad(const struct mtd_dev_info *mtd, int fd, int eb);
+
+/**
+ * mtd_mark_bad - mark an eraseblock as bad.
+ * @mtd: MTD device description object
+ * @fd: MTD device node file descriptor
+ * @eb: eraseblock to mark as bad
+ *
+ * This function marks eraseblock @eb as bad. Returns %0 in case of success and
+ * %-1 in case of failure.
+ */
+int mtd_mark_bad(const struct mtd_dev_info *mtd, int fd, int eb);
+
+/**
+ * mtd_read - read data from an MTD device.
+ * @mtd: MTD device description object
+ * @fd: MTD device node file descriptor
+ * @eb: eraseblock to read from
+ * @offs: offset withing the eraseblock to read from
+ * @buf: buffer to read data to
+ * @len: how many bytes to read
+ *
+ * This function reads @len bytes of data from eraseblock @eb and offset @offs
+ * of the MTD device defined by @mtd and stores the read data at buffer @buf.
+ * Returns %0 in case of success and %-1 in case of failure.
+ */
+int mtd_read(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
+	     void *buf, int len);
+
+/**
+ * mtd_write - write data to an MTD device.
+ * @mtd: MTD device description object
+ * @fd: MTD device node file descriptor
+ * @eb: eraseblock to write to
+ * @offs: offset withing the eraseblock to write to
+ * @buf: buffer to write
+ * @len: how many bytes to write
+ *
+ * This function writes @len bytes of data to eraseblock @eb and offset @offs
+ * of the MTD device defined by @mtd. Returns %0 in case of success and %-1 in
+ * case of failure.
+ */
+int mtd_write(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
+	      void *buf, int len);
+
+#endif /* __LIBMTD_H__ */
diff --git a/lib/Kconfig b/lib/Kconfig
index 5e4cf82..d49e1dc 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -50,6 +50,9 @@ config LIBSCAN
 config LIBUBIGEN
 	bool
 
+config LIBMTD
+	bool
+
 source lib/gui/Kconfig
 
 endmenu
diff --git a/lib/Makefile b/lib/Makefile
index aeeaad3..3604343 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -37,5 +37,6 @@ obj-$(CONFIG_QSORT)	+= qsort.o
 obj-$(CONFIG_UBIUTILS)	+= ubiutils-common.o
 obj-$(CONFIG_LIBSCAN)	+= libscan.o
 obj-$(CONFIG_LIBUBIGEN)	+= libubigen.o
+obj-$(CONFIG_LIBMTD)	+= libmtd.o
 obj-y			+= gui/
 obj-$(CONFIG_XYMODEM)	+= xymodem.o
diff --git a/lib/libmtd.c b/lib/libmtd.c
new file mode 100644
index 0000000..dd5717a
--- /dev/null
+++ b/lib/libmtd.c
@@ -0,0 +1,371 @@
+/*
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2012 Wolfram Sang, Pengutronix e.K. <w.sang at pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Artem Bityutskiy
+ * Author: Wolfram Sang
+ *
+ * This file is part of the MTD library. Based on pre-2.6.30 kernels support,
+ * now adapted to barebox.
+ *
+ * NOTE: No support for 64 bit sizes yet!
+ */
+
+#include <common.h>
+#include <stdlib.h>
+#include <string.h>
+#include <malloc.h>
+#include <errno.h>
+#include <crc.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <ioctl.h>
+#include <linux/stat.h>
+#include <linux/mtd/mtd-abi.h>
+#include <mtd/libmtd.h>
+#include <mtd/utils.h>
+
+#define PROGRAM_NAME "libmtd"
+
+static inline int mtd_ioctl_error(const struct mtd_dev_info *mtd, int eb,
+				  const char *sreq)
+{
+	return sys_errmsg("%s ioctl failed for eraseblock %d (%s)",
+			  sreq, eb, mtd->node);
+}
+
+static int mtd_valid_erase_block(const struct mtd_dev_info *mtd, int eb)
+{
+	if (eb < 0 || eb >= mtd->eb_cnt) {
+		errmsg("bad eraseblock number %d, %s has %d eraseblocks",
+		       eb, mtd->node, mtd->eb_cnt);
+		errno = EINVAL;
+		return -1;
+	}
+	return 0;
+}
+
+int mtd_erase(const struct mtd_dev_info *mtd, int fd, int eb)
+{
+	int ret;
+	struct erase_info_user ei;
+
+	ret = mtd_valid_erase_block(mtd, eb);
+	if (ret)
+		return ret;
+
+	ei.start = (__u64)eb * mtd->eb_size;
+	ei.length = mtd->eb_size;
+
+	ret = ioctl(fd, MEMERASE, &ei);
+	if (ret < 0)
+		return mtd_ioctl_error(mtd, eb, "MEMERASE");
+	return 0;
+}
+
+/* Patterns to write to a physical eraseblock when torturing it */
+static uint8_t patterns[] = {0xa5, 0x5a, 0x0};
+
+/**
+ * check_pattern - check if buffer contains only a certain byte pattern.
+ * @buf: buffer to check
+ * @patt: the pattern to check
+ * @size: buffer size in bytes
+ *
+ * This function returns %1 in there are only @patt bytes in @buf, and %0 if
+ * something else was also found.
+ */
+static int check_pattern(const void *buf, uint8_t patt, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (((const uint8_t *)buf)[i] != patt)
+			return 0;
+	return 1;
+}
+
+int mtd_torture(const struct mtd_dev_info *mtd, int fd, int eb)
+{
+	int err, i, patt_count;
+	void *buf;
+
+	normsg("run torture test for PEB %d", eb);
+	patt_count = ARRAY_SIZE(patterns);
+
+	buf = xmalloc(mtd->eb_size);
+
+	for (i = 0; i < patt_count; i++) {
+		err = mtd_erase(mtd, fd, eb);
+		if (err)
+			goto out;
+
+		/* Make sure the PEB contains only 0xFF bytes */
+		err = mtd_read(mtd, fd, eb, 0, buf, mtd->eb_size);
+		if (err)
+			goto out;
+
+		err = check_pattern(buf, 0xFF, mtd->eb_size);
+		if (err == 0) {
+			errmsg("erased PEB %d, but a non-0xFF byte found", eb);
+			errno = EIO;
+			goto out;
+		}
+
+		/* Write a pattern and check it */
+		memset(buf, patterns[i], mtd->eb_size);
+		err = mtd_write(mtd, fd, eb, 0, buf, mtd->eb_size);
+		if (err)
+			goto out;
+
+		memset(buf, ~patterns[i], mtd->eb_size);
+		err = mtd_read(mtd, fd, eb, 0, buf, mtd->eb_size);
+		if (err)
+			goto out;
+
+		err = check_pattern(buf, patterns[i], mtd->eb_size);
+		if (err == 0) {
+			errmsg("pattern %x checking failed for PEB %d",
+				patterns[i], eb);
+			errno = EIO;
+			goto out;
+		}
+	}
+
+	err = 0;
+	normsg("PEB %d passed torture test, do not mark it a bad", eb);
+
+out:
+	free(buf);
+	return -1;
+}
+
+int mtd_is_bad(const struct mtd_dev_info *mtd, int fd, int eb)
+{
+	int ret;
+	loff_t seek;
+
+	ret = mtd_valid_erase_block(mtd, eb);
+	if (ret)
+		return ret;
+
+	if (!mtd->bb_allowed)
+		return 0;
+
+	seek = (loff_t)eb * mtd->eb_size;
+	ret = ioctl(fd, MEMGETBADBLOCK, &seek);
+	if (ret == -1)
+		return mtd_ioctl_error(mtd, eb, "MEMGETBADBLOCK");
+	return ret;
+}
+
+int mtd_mark_bad(const struct mtd_dev_info *mtd, int fd, int eb)
+{
+	int ret;
+	loff_t seek;
+
+	if (!mtd->bb_allowed) {
+		errno = EINVAL;
+		return -1;
+	}
+
+	ret = mtd_valid_erase_block(mtd, eb);
+	if (ret)
+		return ret;
+
+	seek = (loff_t)eb * mtd->eb_size;
+	ret = ioctl(fd, MEMSETBADBLOCK, &seek);
+	if (ret == -1)
+		return mtd_ioctl_error(mtd, eb, "MEMSETBADBLOCK");
+	return 0;
+}
+
+int mtd_read(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
+	     void *buf, int len)
+{
+	int ret, rd = 0;
+	off_t seek;
+
+	ret = mtd_valid_erase_block(mtd, eb);
+	if (ret)
+		return ret;
+
+	if (offs < 0 || offs + len > mtd->eb_size) {
+		errmsg("bad offset %d or length %d, %s eraseblock size is %d",
+		       offs, len, mtd->node, mtd->eb_size);
+		errno = EINVAL;
+		return -1;
+	}
+
+	/* Seek to the beginning of the eraseblock */
+	seek = (off_t)eb * mtd->eb_size + offs;
+	if (lseek(fd, seek, SEEK_SET) != seek)
+		return sys_errmsg("cannot seek %s to offset %llu",
+				  mtd->node, (unsigned long long)seek);
+
+	while (rd < len) {
+		ret = read(fd, buf, len);
+		if (ret < 0)
+			return sys_errmsg("cannot read %d bytes from %s (eraseblock %d, offset %d)",
+					  len, mtd->node, eb, offs);
+		rd += ret;
+	}
+
+	return 0;
+}
+
+int mtd_write(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
+	      void *buf, int len)
+{
+	int ret;
+	off_t seek;
+
+	ret = mtd_valid_erase_block(mtd, eb);
+	if (ret)
+		return ret;
+
+	if (offs < 0 || offs + len > mtd->eb_size) {
+		errmsg("bad offset %d or length %d, %s eraseblock size is %d",
+		       offs, len, mtd->node, mtd->eb_size);
+		errno = EINVAL;
+		return -1;
+	}
+	if (offs % mtd->subpage_size) {
+		errmsg("write offset %d is not aligned to %s min. I/O size %d",
+		       offs, mtd->node, mtd->subpage_size);
+		errno = EINVAL;
+		return -1;
+	}
+	if (len % mtd->subpage_size) {
+		errmsg("write length %d is not aligned to %s min. I/O size %d",
+		       len, mtd->node, mtd->subpage_size);
+		errno = EINVAL;
+		return -1;
+	}
+
+	/* Seek to the beginning of the eraseblock */
+	seek = (off_t)eb * mtd->eb_size + offs;
+	if (lseek(fd, seek, SEEK_SET) != seek)
+		return sys_errmsg("cannot seek %s to offset %llu",
+				  mtd->node, (unsigned long long)seek);
+
+	ret = write(fd, buf, len);
+	if (ret != len)
+		return sys_errmsg("cannot write %d bytes to %s (eraseblock %d, offset %d)",
+				  len, mtd->node, eb, offs);
+
+	return 0;
+}
+
+/**
+ * mtd_get_dev_info - fill the mtd_dev_info structure
+ * @node: name of the MTD device node
+ * @mtd: the MTD device information is returned here
+ */
+int mtd_get_dev_info(const char *node, struct mtd_dev_info *mtd)
+{
+	struct mtd_info_user ui;
+	int fd, ret;
+	loff_t offs = 0;
+
+	memset(mtd, '\0', sizeof(struct mtd_dev_info));
+
+	mtd->node = node;
+
+	fd = open(node, O_RDWR);
+	if (fd < 0)
+		return sys_errmsg("cannot open \"%s\"", node);
+
+	if (ioctl(fd, MEMGETINFO, &ui)) {
+		sys_errmsg("MEMGETINFO ioctl request failed");
+		goto out_close;
+	}
+
+	ret = ioctl(fd, MEMGETBADBLOCK, &offs);
+	if (ret == -1) {
+		if (errno != EOPNOTSUPP) {
+			sys_errmsg("MEMGETBADBLOCK ioctl failed");
+			goto out_close;
+		}
+		errno = 0;
+		mtd->bb_allowed = 0;
+	} else
+		mtd->bb_allowed = 1;
+
+	mtd->type = ui.type;
+	mtd->size = ui.size;
+	mtd->eb_size = ui.erasesize;
+	mtd->min_io_size = ui.writesize;
+	mtd->oob_size = ui.oobsize;
+
+	if (mtd->min_io_size <= 0) {
+		errmsg("%s has insane min. I/O unit size %d",
+		       node, mtd->min_io_size);
+		goto out_close;
+	}
+	if (mtd->eb_size <= 0 || mtd->eb_size < mtd->min_io_size) {
+		errmsg("%s has insane eraseblock size %d",
+		       node, mtd->eb_size);
+		goto out_close;
+	}
+	if (mtd->size <= 0 || mtd->size < mtd->eb_size) {
+		errmsg("%s has insane size %lld",
+		       node, mtd->size);
+		goto out_close;
+	}
+
+	mtd->eb_cnt = ui.size / ui.erasesize;
+
+	switch(mtd->type) {
+	case MTD_ABSENT:
+		errmsg("%s (%s) is removable and is not present",
+		       mtd->node, node);
+		goto out_close;
+	case MTD_RAM:
+		strcpy((char *)mtd->type_str, "ram");
+		break;
+	case MTD_ROM:
+		strcpy((char *)mtd->type_str, "rom");
+		break;
+	case MTD_NORFLASH:
+		strcpy((char *)mtd->type_str, "nor");
+		break;
+	case MTD_NANDFLASH:
+		strcpy((char *)mtd->type_str, "nand");
+		break;
+	case MTD_DATAFLASH:
+		strcpy((char *)mtd->type_str, "dataflash");
+		break;
+	case MTD_UBIVOLUME:
+		strcpy((char *)mtd->type_str, "ubi");
+		break;
+	default:
+		goto out_close;
+	}
+
+	if (ui.flags & MTD_WRITEABLE)
+		mtd->writable = 1;
+	mtd->subpage_size = mtd->min_io_size;
+
+	close(fd);
+
+	return 0;
+
+out_close:
+	close(fd);
+	return -1;
+}
-- 
1.7.10.4




More information about the barebox mailing list