[PATCH] ARM OMAP: add help text for OMAP_BUILD_IFT

[Sascha Hauer]

On Tue, Dec 18, 2012 at 09:45:38AM +0100, barebox at lists.infradead.org wrote:
> From: Jan Luebbe <jlu at pengutronix.de>
> 
> Signed-off-by: Jan Luebbe <jlu at pengutronix.de>

Applied, thanks

Sascha

> ---
>  arch/arm/mach-omap/Kconfig |    6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
> index 451783e..27626a2 100644
> --- a/arch/arm/mach-omap/Kconfig
> +++ b/arch/arm/mach-omap/Kconfig
> @@ -67,8 +67,12 @@ config OMAP_GPMC
>  	  NAND, OneNAND etc.
>  
>  config OMAP_BUILD_IFT
> -	prompt "build ift binary"
> +	prompt "build ift binary (MLO)"
>  	bool
> +	help
> +	  Say Y here if you want to build an MLO binary. On TI SoCs, this
> +	  binary is loaded to SRAM. It is responsible for initializing
> +	  the SDRAM and possibly chainloading a full-featured barebox.
>  
>  config OMAP_BUILD_SPI
>  	prompt "build SPI binary"
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |