September 2015 Archives by thread

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

Starting: Tue Sep 1 00:36:55 PDT 2015
Ending: Wed Sep 30 20:47:47 PDT 2015
Messages: 213

[PATCH] ath10k: Disable PCI power save for QCA99X0 Michal Kazior
CT firmware beta-15 can now tune noise-floor thresholds. Ben Greear
HT80 monitoring using ath10k Yeoh Chun-Yeow
- HT80 monitoring using ath10k Ben Greear
  - HT80 monitoring using ath10k Yeoh Chun-Yeow
    - HT80 monitoring using ath10k Ben Greear
[PATCH] ath10k: invalid mcs reported in rx descriptor c_mpubbi at qti.qualcomm.com
- [PATCH] ath10k: invalid mcs reported in rx descriptor Kalle Valo
[PATCH 1/2] ath10k: fix beamformee VHT STS capability Bartosz Markowski
- [PATCH 1/2] ath10k: fix beamformee VHT STS capability Kalle Valo
[PATCH 2/2] ath10k: fix beamformer VHT sounding dimensions capability Bartosz Markowski
[PATCH 1/2] ath10k: change beamformee VHT STS capability Bartosz Markowski
- [PATCH 1/2] ath10k: change beamformee VHT STS capability Kalle Valo
  - [PATCH 1/2] ath10k: change beamformee VHT STS capability Bartosz Markowski
[PATCH] ath10k: move hw_scan worker queuing Michal Kazior
- [PATCH] ath10k: move hw_scan worker queuing Kalle Valo
[PATCH 1/2] ath10k: split switch_vif_chanctx guts Michal Kazior
- [PATCH 2/2] ath10k: handle IEEE80211_CHANCTX_CHANGE_WIDTH properly Michal Kazior
- [PATCH 1/2] ath10k: split switch_vif_chanctx guts Kalle Valo
[PATCH] ath: use PRI value given by spec for fixed PRI Peter Oh
- [PATCH] ath: use PRI value given by spec for fixed PRI Zefir Kurtisi
  - [PATCH] ath: use PRI value given by spec for fixed PRI Kalle Valo
QCA6164 in Fedora Susi Lehtola
- QCA6164 in Fedora Michal Kazior
- QCA6164 in Fedora Susi Lehtola
  - QCA6164 in Fedora Susi Lehtola
    - QCA6164 in Fedora Michal Kazior
    - QCA6164 in Fedora Susi Lehtola
  - QCA6164 in Fedora Michal Kazior
    - QCA6164 in Fedora Susi Lehtola
IBSS-RSN support on ath10k only links Alessandro Bolletta
- IBSS-RSN support on ath10k only links Janusz Dziedzic
  - R: IBSS-RSN support on ath10k only links Alessandro Bolletta
    - IBSS-RSN support on ath10k only links Janusz Dziedzic
    - R: IBSS-RSN support on ath10k only links Alessandro Bolletta
    - IBSS-RSN support on ath10k only links Janusz Dziedzic
    - Setting up a VHT ad-hoc connection with ath10k Jorge Baranda
    - Setting up a VHT ad-hoc connection with ath10k Janusz Dziedzic
    - Setting up a VHT ad-hoc connection with ath10k Jorge Baranda
    - IBSS-RSN support on ath10k only links Ben Greear
    - R: IBSS-RSN support on ath10k only links Alessandro Bolletta
    - R: IBSS-RSN support on ath10k only links Ben Greear
    - R: R: IBSS-RSN support on ath10k only links Alessandro Bolletta
    - R: R: IBSS-RSN support on ath10k only links Ben Greear
multiple physical interfaces Harms, Hannes
- multiple physical interfaces Ben Greear
QCA6174 hw2.1 irq_mode=0 broken on 4.2-rc3, working on 4.1.2 Enrico Tagliavini
[PATCH v2] ath: use PRI value given by spec for fixed PRI Peter Oh
- [PATCH v2] ath: use PRI value given by spec for fixed PRI Kalle Valo
- [PATCH v2] ath: use PRI value given by spec for fixed PRI Peter Oh
  - [PATCH v2] ath: use PRI value given by spec for fixed PRI Kalle Valo
WLE600VX from PCEngines Marcel H.
- WLE600VX from PCEngines Tomasz Skapski
- WLE600VX from PCEngines Janusz Dziedzic
  - WLE600VX from PCEngines Jorge Baranda
    - WLE600VX from PCEngines Janusz Dziedzic
    - WLE600VX from PCEngines Marcel H.
    - WLE600VX from PCEngines Marcel H.
    - WLE600VX from PCEngines Harms, Hannes
    - WLE600VX from PCEngines Janusz Dziedzic
    - [SPAM] Re: WLE600VX from PCEngines Jorge Baranda
    - [SPAM] Re: WLE600VX from PCEngines Ben Greear
    - [SPAM] Re: WLE600VX from PCEngines Harms, Hannes
    - [SPAM] Re: WLE600VX from PCEngines Marcel H.
    - [SPAM] Re: WLE600VX from PCEngines Marcel H.
    - [SPAM] Re: WLE600VX from PCEngines Ben Greear
    - [SPAM] Re: [SPAM] Re: WLE600VX from PCEngines Jorge Baranda
    - WLE600VX from PCEngines Jorge Baranda
    - WLE600VX from PCEngines Marcel H.
    - WLE600VX from PCEngines Ben Greear
    - WLE600VX from PCEngines Jorge Baranda
    - WLE600VX from PCEngines Janusz Dziedzic
    - WLE600VX from PCEngines Janusz Dziedzic
[PATCH 3/3] ath10k: implement mesh support Kalle Valo
- [PATCH 3/3] ath10k: implement mesh support Kalle Valo
  - [PATCH 3/3] ath10k: implement mesh support Bob Copeland
    - [PATCH 3/3] ath10k: implement mesh support Kalle Valo
    - [PATCH 3/3] ath10k: implement mesh support Johannes Berg
    - [PATCH 3/3] ath10k: implement mesh support Peter Oh
    - [PATCH 3/3] ath10k: implement mesh support Bob Copeland
- [PATCH 3/3] ath10k: implement mesh support Bob Copeland
- [PATCH 3/3] ath10k: implement mesh support Bob Copeland
  - [PATCH 3/3] ath10k: implement mesh support Yeoh Chun-Yeow
    - [PATCH 3/3] ath10k: implement mesh support Peter Oh
[PATCH] ath10k: add ATH10K_FW_FEATURE_RAW_MODE_SUPPORT to ath10k_core_fw_feature_str[] Kalle Valo
- [PATCH] ath10k: add ATH10K_FW_FEATURE_RAW_MODE_SUPPORT to ath10k_core_fw_feature_str[] Kalle Valo
firmware-5.bin_10.2.4.70.6-2 has raw mode enabled Kalle Valo
[PATCH 2/2] ath10k: fix mu-mimo rx status reporting Kalle Valo
[PATCH] ath10k: Fix DMA alloc failure for target requested memory chunks Kalle Valo
[PATCH] ath10k: Drop probe responses when too many are queued Kalle Valo
[PATCH v3 1/3] ath10k: enable monitor when OTHER_BSS requested Bob Copeland
- [PATCH v3 2/3] ath10k: check for encryption before adding MIC_LEN Bob Copeland
- [PATCH v3 3/3] ath10k: implement mesh support Bob Copeland
- [PATCH v3 1/3] ath10k: enable monitor when OTHER_BSS requested Kalle Valo
[PATCH] ath: fix incorrect PPB on JAPAN chirp radar Peter Oh
- [PATCH] ath: fix incorrect PPB on JAPAN chirp radar Kalle Valo
- [PATCH] ath: fix incorrect PPB on JAPAN chirp radar Kalle Valo
New CT firmware beta-15 available. Igor Pavlov
- New CT firmware beta-15 available. Ben Greear
  - New CT firmware beta-15 available. Igor Pavlov
    - New CT firmware beta-15 available. Ben Greear
[PATCH V2] debugfs: don't assume sizeof(bool) to be 4 bytes Viresh Kumar
- [PATCH V2] debugfs: don't assume sizeof(bool) to be 4 bytes Arnd Bergmann
  - [PATCH V2] debugfs: don't assume sizeof(bool) to be 4 bytes Viresh Kumar
    - [PATCH V2] debugfs: don't assume sizeof(bool) to be 4 bytes Greg KH
    - [PATCH V2] debugfs: don't assume sizeof(bool) to be 4 bytes Viresh Kumar
    - [PATCH V2] debugfs: don't assume sizeof(bool) to be 4 bytes Arnd Bergmann
- [PATCH V2] debugfs: don't assume sizeof(bool) to be 4 bytes Mark Brown
Need to re-associate firmware peer when SMPS_CHANGED is set? Ben Greear
- Need to re-associate firmware peer when SMPS_CHANGED is set? Adrian Chadd
  - Need to re-associate firmware peer when SMPS_CHANGED is set? Ben Greear
    - Need to re-associate firmware peer when SMPS_CHANGED is set? Adrian Chadd
[PATCH 4.3] ath10k: fix DMA related firmware crashes on multiple devices Kalle Valo
- [PATCH 4.3] ath10k: fix DMA related firmware crashes on multiple devices Felix Fietkau
  - [PATCH 4.3] ath10k: fix DMA related firmware crashes on multiple devices Kalle Valo
[PATCH 4.3 RESEND] ath10k: fix DMA related firmware crashes on multiple devices Felix Fietkau
- [PATCH 4.3 RESEND] ath10k: fix DMA related firmware crashes on multiple devices Kalle Valo
[PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Viresh Kumar
- [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Charles Keepax
- [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Johannes Berg
  - [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Viresh Kumar
    - [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Steven Rostedt
    - [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Viresh Kumar
    - [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Linus Torvalds
    - [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Steven Rostedt
    - [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Borislav Petkov
    - [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Ingo Molnar
- [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Steven Rostedt
  - [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Viresh Kumar
    - [PATCH V3 2/2] debugfs: don't assume sizeof(bool) to be 4 bytes Tejun Heo
Default rates for broadcast, multicast, and management frames? Ben Greear
Bug in CCK hw_rate definitions? Ben Greear
- Bug in CCK hw_rate definitions? Michal Kazior
  - Bug in CCK hw_rate definitions? Ben Greear
[PATCH] ath10k: Fix CCK rate definitions. greearb at candelatech.com
- [PATCH] ath10k: Fix CCK rate definitions. Michal Kazior
  - [PATCH] ath10k: Fix CCK rate definitions. Ben Greear
CT firmware beta-15 can now configure arbitrary rate-sets. Ben Greear
ath.git master branch rebased to 4.3-rc1-wl-ath Kalle Valo
[PATCH] ath10k: fix ldpc param for fixed rate Rajkumar Manoharan
- [PATCH] ath10k: fix ldpc param for fixed rate Michal Kazior
  - [PATCH] ath10k: fix ldpc param for fixed rate Rajkumar Manoharan
- [PATCH] ath10k: fix ldpc param for fixed rate Kalle Valo
qca99x0 don't work with MSI-X supported/enabled Janusz Dziedzic
- qca99x0 don't work with MSI-X supported/enabled Vasanthakumar Thiagarajan
[PATCH] ath10k: fix MSI-X registering for qca99x0 Janusz Dziedzic
- [PATCH] ath10k: fix MSI-X registering for qca99x0 Kalle Valo
[PATCH 0/2] ath10k: implement debugfs interface for Transmit Power Control stats Kalle Valo
- [PATCH 1/2] ath10k: add a_sle32_to_cpu() Kalle Valo
- [PATCH 2/2] ath10k: implement debugfs interface for Transmit Power Control stats Kalle Valo
AP mode firmware crash on QCA9880-BR4A Martin Blumenstingl
Link can't get estabilished over RB911AC boards Alessandro Bolletta
- Link can't get estabilished over RB911AC boards Ben Greear
  - R: Link can't get estabilished over RB911AC boards Alessandro Bolletta
    - R: Link can't get estabilished over RB911AC boards Ben Greear
    - R: R: Link can't get estabilished over RB911AC boards Alessandro Bolletta
    - R: R: Link can't get estabilished over RB911AC boards Ben Greear
  - R: Link can't get estabilished over RB911AC boards Alessandro Bolletta
    - R: Link can't get estabilished over RB911AC boards Ben Greear
- R: Link can't get estabilished over RB911AC boards Alessandro Bolletta
Sending lldp packets with ath10k in ADHOC mode Jorge Baranda
- Sending lldp packets with ath10k in ADHOC mode Jorge Baranda
ACK timing setting Luis Sandoval
- ACK timing setting Ben Greear
QCA9880/9890 rfkill William Riba
- QCA9880/9890 rfkill Adrian Chadd
  - QCA9880/9890 rfkill William Riba
    - QCA9880/9890 rfkill Adrian Chadd
    - QCA9880/9890 rfkill Ben Greear
    - QCA9880/9890 rfkill William Riba
[PATCH] ath10k: use Rx decap mode configured when driver registered Peter Oh
CT 4.2 kernel now supports 80Mhz IBSS Ben Greear
- CT 4.2 kernel now supports 80Mhz IBSS Jorge Baranda
  - CT 4.2 kernel now supports 80Mhz IBSS Harms, Hannes
    - CT 4.2 kernel now supports 80Mhz IBSS Jorge Baranda
    - CT 4.2 kernel now supports 80Mhz IBSS Ben Greear
    - CT 4.2 kernel now supports 80Mhz IBSS Jorge Baranda
    - CT 4.2 kernel now supports 80Mhz IBSS Janusz Dziedzic
    - CT 4.2 kernel now supports 80Mhz IBSS Jorge Baranda
[PATCH] ath10k: Increase pci wakeup timeout to 30 ms c_mkenna at qti.qualcomm.com
[PATCH] ath10k: use pre-allocated DMA buffer in Tx Peter Oh
IBSS and AMSDU on ath10k Ben Greear
[PATCH 0/7] ath10k: add copy engine fast path support Rajkumar Manoharan
- [PATCH 1/7] ath10k: export htc tx rx handlers Rajkumar Manoharan
- [PATCH 2/7] ath10k: register per copy engine send completion callbacks Rajkumar Manoharan
- [PATCH 3/7] ath10k: register per copy engine receive callbacks Rajkumar Manoharan
- [PATCH 4/7] ath10k: export htt tx rx handlers Rajkumar Manoharan
- [PATCH 5/7] ath10k: Configure copy engine 5 for HTT messages Rajkumar Manoharan
- [PATCH 6/7] ath10k: remove unused dl_is_polled Rajkumar Manoharan
- [PATCH 7/7] ath10k: remove htc polling for tx completion Rajkumar Manoharan
[PATCH v2] ath10k: Use station's current operating mode from assoc request Vivek Natarajan
Can we ignore frames with invalid BSSID in IBSS mode? Ben Greear
- Can we ignore frames with invalid BSSID in IBSS mode? Johannes Berg
  - Can we ignore frames with invalid BSSID in IBSS mode? Ben Greear
    - Can we ignore frames with invalid BSSID in IBSS mode? Johannes Berg
    - Can we ignore frames with invalid BSSID in IBSS mode? Ben Greear
    - Can we ignore frames with invalid BSSID in IBSS mode? Johannes Berg
    - Can we ignore frames with invalid BSSID in IBSS mode? Ben Greear
    - Can we ignore frames with invalid BSSID in IBSS mode? Johannes Berg
    - Can we ignore frames with invalid BSSID in IBSS mode? Ben Greear
    - Can we ignore frames with invalid BSSID in IBSS mode? Felix Fietkau
- Can we ignore frames with invalid BSSID in IBSS mode? Nicolas Cavallari
[ath6kl:pending 98/98] drivers/net/wireless/ath/ath10k/mac.c:2172:49: sparse: incompatible types in comparison expression (different type sizes) kbuild test robot
[lkp] [ath6kl:pending 98/98] drivers/net/wireless/ath/ath10k/mac.c:2172:35: note: in expansion of macro 'min' Fengguang Wu
[PATCH] ath10k: only advertise mesh support in raw mode Bob Copeland
- [PATCH] ath10k: only advertise mesh support in raw mode Peter Oh
  - [PATCH] ath10k: only advertise mesh support in raw mode Bob Copeland
    - [PATCH] ath10k: only advertise mesh support in raw mode Yeoh Chun-Yeow
[PATCH] ath10k: Disable PCI PS for QCA988X and QCA99X0 akolli at qti.qualcomm.com
ath.git tree moved to kernel.org Kalle Valo
CT firmware beta-15 can now do A-MSDU with IBSS interfaces. Ben Greear
No more posts about ath10k CT firmware for a while. Ben Greear
- No more posts about ath10k CT firmware for a while. Bastian Bittorf

Last message date: Wed Sep 30 20:47:47 PDT 2015
Archived on: Wed Sep 30 20:48:11 PDT 2015

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).