[PATCH] ath10k: Fix CCK rate definitions.

[Michal Kazior]

On 16 September 2015 at 02:08,  <greearb at candelatech.com> wrote:
> From: Ben Greear <greearb at candelatech.com>
>
> The old values did NOT match what is found in 10.1.467
> firmware.  I figure it is likely it is wrong for the others
> as well.

Does this fix anything at all?


> Signed-off-by: Ben Greear <greearb at candelatech.com>
> ---
>  drivers/net/wireless/ath/ath10k/hw.h | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
> index 4c5eee4..710ca32 100644
> --- a/drivers/net/wireless/ath/ath10k/hw.h
> +++ b/drivers/net/wireless/ath/ath10k/hw.h
> @@ -202,13 +202,13 @@ enum ath10k_hw_rate_ofdm {
>  };
>
>  enum ath10k_hw_rate_cck {
> -       ATH10K_HW_RATE_CCK_LP_11M = 0,
> -       ATH10K_HW_RATE_CCK_LP_5_5M,
> -       ATH10K_HW_RATE_CCK_LP_2M,
> -       ATH10K_HW_RATE_CCK_LP_1M,
> -       ATH10K_HW_RATE_CCK_SP_11M,
> -       ATH10K_HW_RATE_CCK_SP_5_5M,
> -       ATH10K_HW_RATE_CCK_SP_2M,
> +       ATH10K_HW_RATE_CCK_LP_11M = 0x40,
> +       ATH10K_HW_RATE_CCK_LP_5_5M = 0x41,
> +       ATH10K_HW_RATE_CCK_LP_2M = 0x42,
> +       ATH10K_HW_RATE_CCK_LP_1M = 0x43,
> +       ATH10K_HW_RATE_CCK_SP_11M = ATH10K_HW_RATE_CCK_LP_11M | 0x4,
> +       ATH10K_HW_RATE_CCK_SP_5_5M = ATH10K_HW_RATE_CCK_LP_5_5M | 0x4,
> +       ATH10K_HW_RATE_CCK_SP_2M = ATH10K_HW_RATE_CCK_LP_2M | 0x4,
>  };

This breaks Rx CCK rate decoding/reporting. See code associated with
ath10k_mac_hw_rate_to_idx().


Michał