[PATCH] ath10k: fix MSI-X registering for qca99x0
Janusz Dziedzic
janusz.dziedzic at tieto.com
Wed Sep 16 23:17:33 PDT 2015
In case of qca99x0 and MSI-X supported/enabled we
failed during interrupts registering with message:
ath10k_pci 0000:04:00.0: failed to request MSI-X ce irq 50: -22
Issue/fix was reproduced/tested using Dell Latitude E6430 laptop.
Signed-off-by: Janusz Dziedzic <janusz.dziedzic at tieto.com>
---
drivers/net/wireless/ath/ath10k/hw.h | 10 ----------
drivers/net/wireless/ath/ath10k/pci.c | 18 +++++-------------
2 files changed, 5 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 23afcda..bc421a5 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -414,16 +414,6 @@ enum ath10k_hw_rate_cck {
#define CE_COUNT ar->hw_values->ce_count
/*
- * Total number of PCIe MSI interrupts requested for all interrupt sources.
- * PCIe standard forces this to be a power of 2.
- * Some Host OS's limit MSI requests that can be granted to 8
- * so for now we abide by this limit and avoid requesting more
- * than that.
- */
-#define MSI_NUM_REQUEST_LOG2 3
-#define MSI_NUM_REQUEST (1<<MSI_NUM_REQUEST_LOG2)
-
-/*
* Granted MSIs are assigned as follows:
* Firmware uses the first
* Remaining MSIs, if any, are used by Copy Engines
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 1046ab6..110fcad6 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2609,12 +2609,9 @@ static int ath10k_pci_request_irq(struct ath10k *ar)
return ath10k_pci_request_irq_legacy(ar);
case 1:
return ath10k_pci_request_irq_msi(ar);
- case MSI_NUM_REQUEST:
+ default:
return ath10k_pci_request_irq_msix(ar);
}
-
- ath10k_warn(ar, "unknown irq configuration upon request\n");
- return -EINVAL;
}
static void ath10k_pci_free_irq(struct ath10k *ar)
@@ -2657,7 +2654,7 @@ static int ath10k_pci_init_irq(struct ath10k *ar)
/* Try MSI-X */
if (ath10k_pci_irq_mode == ATH10K_PCI_IRQ_AUTO) {
- ar_pci->num_msi_intrs = MSI_NUM_REQUEST;
+ ar_pci->num_msi_intrs = MSI_ASSIGN_CE_MAX + 1;
ret = pci_enable_msi_range(ar_pci->pdev, ar_pci->num_msi_intrs,
ar_pci->num_msi_intrs);
if (ret > 0)
@@ -2705,18 +2702,13 @@ static int ath10k_pci_deinit_irq(struct ath10k *ar)
switch (ar_pci->num_msi_intrs) {
case 0:
ath10k_pci_deinit_irq_legacy(ar);
- return 0;
- case 1:
- /* fall-through */
- case MSI_NUM_REQUEST:
- pci_disable_msi(ar_pci->pdev);
- return 0;
+ break;
default:
pci_disable_msi(ar_pci->pdev);
+ break;
}
- ath10k_warn(ar, "unknown irq configuration upon deinit\n");
- return -EINVAL;
+ return 0;
}
static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
--
1.9.1
More information about the ath10k
mailing list