R: R: IBSS-RSN support on ath10k only links

[Alessandro Bolletta]

I'm using Openwrt trunk Bleeding Edge, r46802, kernel 4.1.6

Here's the log:

[    8.555690] Loading modules backported from Linux version master-2015-07-21-0-g47cd203
[    8.563722] Backport generated by backports.git backports-20150626-0-gc1a4168
[    8.590453] cfg80211: World regulatory domain updated:
[    8.595703] cfg80211:  DFS Master region: unset
[    8.600118] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    8.610009] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.618134] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.626255] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    8.634372] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    8.643990] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    8.653607] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    8.661814] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    8.669938] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    8.819947] ath10k_pci 0000:01:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0
[    9.039112] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[    9.049632] ath10k_pci 0000:01:00.0: Falling back to user helper
[    9.125249] firmware ath10k!cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
[    9.136290] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-pci-168c:003c:19b6:d023.bin failed with error -2
[    9.148852] ath10k_pci 0000:01:00.0: Falling back to user helper
[    9.221747] firmware ath10k!QCA988X!hw2.0!board-pci-168c:003c:19b6:d023.bin: firmware_loading_store: map pages failed
[    9.232684] ath10k_pci 0000:01:00.0: failed to load spec board file, falling back to generic: -11
[    9.408284] ath10k_pci 0000:01:00.0: otp calibration failed: 2
[    9.414212] ath10k_pci 0000:01:00.0: failed to run otp: -22
[    9.419873] ath10k_pci 0000:01:00.0: could not init core (-22)
[    9.425894] ath10k_pci 0000:01:00.0: could not probe fw (-22)

-----Messaggio originale-----
Da: Ben Greear [mailto:greearb at candelatech.com] 
Inviato: lunedì 7 settembre 2015 17.45
A: Alessandro Bolletta <alessandro at mediaspot.net>; Janusz Dziedzic <janusz.dziedzic at tieto.com>
Cc: ath10k at lists.infradead.org
Oggetto: Re: R: IBSS-RSN support on ath10k only links



On 09/07/2015 08:40 AM, Alessandro Bolletta wrote:
> Hi Ben,
>
> I'm trying to run your firmware on my Mikrotik NetMetal device, which features a QCA9882 radio card, but it can't be loaded.
>
> If you can help me I can provide you my dmesg log.

Please do post logs..and let me know what OS and kernel version you are using.

Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com