March 2017 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Mar 1 02:54:37 PST 2017
Ending: Fri Mar 31 14:22:44 PDT 2017
Messages: 506

• [PATCH] staging: vc04_services: Remove unused functions   Jean-Baptiste Abbadie
• [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.   Eric Anholt
• [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.   Eric Anholt
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Eric Anholt
• [PATCH RFC] ARM: bcm2835: Enable missing CMA settings for VC4 driver   Eric Anholt
• [PATCH RFC] ARM: bcm2835: Enable missing CMA settings for VC4 driver   Eric Anholt
• [RFC PATCH] sound: bcm2835-analog-audio: Add driver for bcm2835(Raspberry PI) headphone jack.   Eric Anholt
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Eric Anholt
• [PATCH 2/4] sound: bcm2835-analog-audio: Add driver for bcm2835(Raspberry PI) headphone jack.   Eric Anholt
• [PATCH] bcm2835-v4l2: Fix buffer overflow problem   Eric Anholt
• [PATCH v2 2/3] drm/vc4: Add HDMI audio support   Eric Anholt
• [PATCH v4 0/7] mmc: bcm2835: Add new driver for the sdhost controller   Eric Anholt
• [PATCH v4 5/7] arm64: set CONFIG_MMC_BCM2835=y in defconfig   Eric Anholt
• [PATCH 1/2] dt-bindings: thermal: add support for Raspberry Pi thermal   Eric Anholt
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Eric Anholt
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Eric Anholt
• Eric Anholt offically announces support of VC4 without access to expander on the RPI 3   Eric Anholt
• broken edid   Eric Anholt
• [GIT PULL 1/4] bcm2835 arm DT updates for 4.12   Eric Anholt
• [GIT PULL 2/4] bcm2835 arm defconfig updates for 4.12   Eric Anholt
• [GIT PULL 1/4] bcm2835 arm64 defconfig updates for 4.12   Eric Anholt
• [GIT PULL 4/4] bcm2835 MAINTAINERS updates for 4.12   Eric Anholt
• Eric Anholt offically announces support of VC4 without access to expander on the RPI 3   Eric Anholt
• [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v4)   Eric Anholt
• [GIT PULL] bcm2835-dt-next-2017-03-30   Eric Anholt
• [PATCH 1/2] staging/vc04_services: initialize cache line size properly   Arnd Bergmann
• [PATCH 2/2] staging/vc04_services: add CONFIG_OF dependency   Arnd Bergmann
• [PATCH] staging: vc04_services: make BCM_VIDEOCORE tristate   Arnd Bergmann
• [GIT PULL 1/4] bcm2835 arm DT updates for 4.12   Arnd Bergmann
• [GIT PULL 1/4] bcm2835 arm DT updates for 4.12   Arnd Bergmann
• outreachy   Scott Branden
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Mark Brown
• [PATCH 1/3] ASoC : Add an IC bit and frame master mode (SoC and Codec slave).   Mark Brown
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Mark Brown
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Mark Brown
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Mark Brown
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Mark Brown
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Mark Brown
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Mark Brown
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Mark Brown
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Mark Brown
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Mark Brown
• [PATCH] staging: bcm2835-audio: single-statement block does not need braces   David Cako
• [PATCH] staging: bcm2835-audio: single-statement block does not need braces   David Cako
• [PATCH 2/3] staging: bcm2835-audio: select BCM2835_VCHIQ rather then depending on it.   Dan Carpenter
• [PATCH] Staging: media: platform: bcm2835 - Style fix   Dan Carpenter
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Dan Carpenter
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Dan Carpenter
• [PATCH] Staging: media: platform: bcm2835 - Style fix   Dan Carpenter
• [PATCH 1/2] staging: bcm2835-audio: Add support for simultanous HDMI and Headphone audio   Dan Carpenter
• [PATCH 2/2] staging: bcm2835-audio: Disable extra virtual cards by default   Dan Carpenter
• [PATCH] bcm2835-v4l2: Fix buffer overflow problem   Dan Carpenter
• [PATCH] bcm2835-v4l2: Fix buffer overflow problem   Dan Carpenter
• [PATCH] vc04_services: Fixing coding guideline error   Dan Carpenter
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Dan Carpenter
• [PATCH 5/6] staging: bcm2835-firmware-gpio: Add a build system for the driver   Dan Carpenter
• [PATCH 0/5] staging: vc04_services: camera driver maintance   Dan Carpenter
• [PATCH 0/5] staging: vc04_services: camera driver maintance   Dan Carpenter
• [PATCH 0/5] staging: vc04_services: camera driver maintance   Dan Carpenter
• [PATCH 2/5] staging: bcm2835-camera: Fix integer underrun in port_parameter_get   Dan Carpenter
• [PATCH 2/5] staging: bcm2835-camera: Fix integer underrun in port_parameter_get   Dan Carpenter
• [PATCH 2/5] staging: bcm2835-camera: Fix integer underrun in port_parameter_get   Dan Carpenter
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Dan Carpenter
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Mauro Carvalho Chehab
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Mauro Carvalho Chehab
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Mauro Carvalho Chehab
• [PATCH RFC] dwc2: Don't assume URB transfer_buffer are dword-aligned   Mauro Carvalho Chehab
• [PATCH RFC] dwc2: Don't assume URB transfer_buffer are dword-aligned   Mauro Carvalho Chehab
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Mauro Carvalho Chehab
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Mauro Carvalho Chehab
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Mauro Carvalho Chehab
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Mauro Carvalho Chehab
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Mauro Carvalho Chehab
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Mauro Carvalho Chehab
• [PATCH RFC] dwc2: Don't assume URB transfer_buffer are dword-aligned   Mauro Carvalho Chehab
• [PATCH RFC] dwc2: Don't assume URB transfer_buffer are dword-aligned   Mauro Carvalho Chehab
• [PATCH 01/22] driver-api/basics.rst: add device table header   Mauro Carvalho Chehab
• [PATCH 02/22] docs-rst: convert usb docbooks to ReST   Mauro Carvalho Chehab
• [PATCH 03/22] usb.rst: Enrich its ReST representation   Mauro Carvalho Chehab
• [PATCH 04/22] gadget.rst: Enrich its ReST representation and add kernel-doc tag   Mauro Carvalho Chehab
• [PATCH 05/22] writing_usb_driver.rst: Enrich its ReST representation   Mauro Carvalho Chehab
• [PATCH 06/22] writing_musb_glue_layer.rst: Enrich its ReST representation   Mauro Carvalho Chehab
• [PATCH 07/22] usb/anchors.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH 08/22] usb/bulk-streams.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH 09/22] usb/callbacks.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH 10/22] usb/power-management.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH 11/22] usb/dma.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH 12/22] error-codes.rst: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH 13/22] usb/hotplug.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH 14/22] usb/persist.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH 15/22] usb/URB.txt: convert to ReST and update it   Mauro Carvalho Chehab
• [PATCH 16/22] usb/gadget.rst: remove unused kernel-doc tags   Mauro Carvalho Chehab
• [PATCH 17/22] usb.rst: get rid of some Sphinx errors   Mauro Carvalho Chehab
• [PATCH 18/22] usb: get rid of some ReST doc build errors   Mauro Carvalho Chehab
• [PATCH 19/22] usb: composite.h: fix two warnings when building docs   Mauro Carvalho Chehab
• [PATCH 20/22] usb: gadget.h: be consistent at kernel doc macros   Mauro Carvalho Chehab
• [PATCH 21/22] docs-rst: fix usb cross-references   Mauro Carvalho Chehab
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Mauro Carvalho Chehab
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Mauro Carvalho Chehab
• [PATCH 04/22] gadget.rst: Enrich its ReST representation and add kernel-doc tag   Mauro Carvalho Chehab
• [PATCH 04/22] gadget.rst: Enrich its ReST representation and add kernel-doc tag   Mauro Carvalho Chehab
• [PATCH 02/22] docs-rst: convert usb docbooks to ReST   Mauro Carvalho Chehab
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Mauro Carvalho Chehab
• [PATCH v2 01/22] tmplcvt: make the tool more robust   Mauro Carvalho Chehab
• [PATCH v2 02/22] driver-api/basics.rst: add device table header   Mauro Carvalho Chehab
• [PATCH v2 03/22] docs-rst: convert usb docbooks to ReST   Mauro Carvalho Chehab
• [PATCH v2 04/22] usb.rst: Enrich its ReST representation   Mauro Carvalho Chehab
• [PATCH v2 05/22] gadget.rst: Enrich its ReST representation and add kernel-doc tag   Mauro Carvalho Chehab
• [PATCH v2 06/22] writing_usb_driver.rst: Enrich its ReST representation   Mauro Carvalho Chehab
• [PATCH v2 07/22] writing_musb_glue_layer.rst: Enrich its ReST representation   Mauro Carvalho Chehab
• [PATCH v2 08/22] usb/anchors.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH v2 09/22] usb/bulk-streams.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH v2 10/22] usb/callbacks.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH v2 11/22] usb/power-management.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH v2 12/22] usb/dma.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH v2 13/22] error-codes.rst: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH v2 14/22] usb/hotplug.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH v2 15/22] usb/persist.txt: convert to ReST and add to driver-api book   Mauro Carvalho Chehab
• [PATCH v2 16/22] usb/URB.txt: convert to ReST and update it   Mauro Carvalho Chehab
• [PATCH v2 17/22] usb.rst: get rid of some Sphinx errors   Mauro Carvalho Chehab
• [PATCH v2 18/22] usb: get rid of some ReST doc build errors   Mauro Carvalho Chehab
• [PATCH v2 19/22] usb: composite.h: fix two warnings when building docs   Mauro Carvalho Chehab
• [PATCH v2 20/22] usb: gadget.h: be consistent at kernel doc macros   Mauro Carvalho Chehab
• [PATCH v2 21/22] docs-rst: fix usb cross-references   Mauro Carvalho Chehab
• [PATCH v2 22/22] usb: document that URB transfer_buffer should be aligned   Mauro Carvalho Chehab
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Mauro Carvalho Chehab
• [PATCH v2 01/22] tmplcvt: make the tool more robust   Mauro Carvalho Chehab
• [PATCH 02/22] docs-rst: convert usb docbooks to ReST   Mauro Carvalho Chehab
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Mauro Carvalho Chehab
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Mauro Carvalho Chehab
• [PATCH] mmc: bcm2835: Fix possible NULL ptr dereference in bcm2835_request   Jaehoon Chung
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Lars-Peter Clausen
• [PATCH 02/22] docs-rst: convert usb docbooks to ReST   Jonathan Corbet
• [PATCH]: staging: vc04_services: fix checkpatch error   Haim Daniel
• [PATCH v2]: staging: vc04_services: fix checkpatch error   Haim Daniel
• [PATCH v3] staging: vc04_services: add parenthesis to macros   Haim Daniel
• [PATCH] clocksource: add missing line break to error messages   Ben Dooks
• outreachy   Florian Fainelli
• [GIT PULL 1/4] bcm2835 arm DT updates for 4.12   Florian Fainelli
• [GIT PULL 2/4] bcm2835 arm defconfig updates for 4.12   Florian Fainelli
• [GIT PULL 1/4] bcm2835 arm64 defconfig updates for 4.12   Florian Fainelli
• [GIT PULL 4/4] bcm2835 MAINTAINERS updates for 4.12   Florian Fainelli
• [PATCH] ASoC: bcm_2835: Simplify mono guard by returning error on mono   Matt Flax
• [alsa-devel] [PATCH] ASoC: bcm_2835: Simplify mono guard by returning error on mono   Matt Flax
• [alsa-devel] [PATCH] ASoC: bcm_2835: Simplify mono guard by returning error on mono   Matt Flax
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Matt Flax
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Matt Flax
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Matt Flax
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Matt Flax
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Matt Flax
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Matt Flax
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Emmanuel Fusté
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Emmanuel Fusté
• bcm2835-analog-audio: Is my driver PWM, ALSA or neither   Gottfried Haider
• bcm2835-analog-audio: Is my driver PWM, ALSA or neither   Gottfried Haider
• [PATCH v4 4/7] arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig   Ulf Hansson
• [PATCH v4 5/7] arm64: set CONFIG_MMC_BCM2835=y in defconfig   Ulf Hansson
• [PATCH v4 3/7] mmc: bcm2835: add sdhost controller to devicetree   Ulf Hansson
• [PATCH v4 0/7] mmc: bcm2835: Add new driver for the sdhost controller   Ulf Hansson
• [PATCH v4 0/7] mmc: bcm2835: Add new driver for the sdhost controller   Ulf Hansson
• [PATCH] mmc: bcm2835: Fix possible NULL ptr dereference in bcm2835_request   Ulf Hansson
• [PATCH 02/22] docs-rst: convert usb docbooks to ReST   Markus Heiser
• [PATCH 02/22] docs-rst: convert usb docbooks to ReST   Markus Heiser
• [PATCH 02/22] docs-rst: convert usb docbooks to ReST   Markus Heiser
• [PATCH 02/22] docs-rst: convert usb docbooks to ReST   Markus Heiser
• [PATCH 1/4] dt-bindings: Document the dmas and dma-names properties for bcm2835-analog-audio   Rob Herring
• [alsa-devel] [PATCH 1/4] dt-bindings: Document the dmas and dma-names properties for bcm2835-analog-audio   Rob Herring
• [alsa-devel] [PATCH 1/4] dt-bindings: Document the dmas and dma-names properties for bcm2835-analog-audio   Rob Herring
• [PATCH v4 0/7] mmc: bcm2835: Add new driver for the sdhost controller   Gerd Hoffmann
• [PATCH v4 1/7] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Gerd Hoffmann
• [PATCH 1/4] qxl: drop mode_info.modes & related code.   Gerd Hoffmann
• [PATCH v4 2/7] mmc: bcm2835: Add new driver for the sdhost controller.   Gerd Hoffmann
• [PATCH 2/4] qxl: limit monitor config read retries   Gerd Hoffmann
• [PATCH v4 3/7] mmc: bcm2835: add sdhost controller to devicetree   Gerd Hoffmann
• [PATCH 3/4] qxl: read monitors config at boot   Gerd Hoffmann
• [PATCH v4 4/7] arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig   Gerd Hoffmann
• [PATCH 4/4] qxl: fix qxl_conn_get_modes   Gerd Hoffmann
• [PATCH v4 5/7] arm64: set CONFIG_MMC_BCM2835=y in defconfig   Gerd Hoffmann
• [PATCH v4 6/7] arm: dts: bcm283x: switch from &sdhci to &sdhost   Gerd Hoffmann
• [PATCH v4 7/7] arm64: dts: bcm2837: add &sdhci and &sdhost   Gerd Hoffmann
• [PATCH v4 0/7] mmc: bcm2835: Add new driver for the sdhost controller   Gerd Hoffmann
• 4.10-rc3 rpi issues   Gerd Hoffmann
• [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller   Gerd Hoffmann
• broken edid   Gerd Hoffmann
• broken edid   Gerd Hoffmann
• [PATCH V11 6/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Nobuhiro Iwamatsu
• [PATCH] vc04_services: Fixing coding and logical guidelines   Pushkar Jambhlekar
• [PATCH] vc04_services: Fixing coding and logical guidelines   Pushkar Jambhlekar
• [PATCH] vc04_services: Fixing coding guideline error   Pushkar Jambhlekar
• [PATCH] vc04_services: Fixing coding guideline error   Pushkar Jambhlekar
• [PATCH] Staging: media: platform: bcm2835 - Style fix   Greg KH
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Greg KH
• [PATCH] staging: vc04_services: open brace code style fix   Greg KH
• [PATCH] staging: bcm2835-audio: single-statement block does not need braces   Greg KH
• Status of V5 patch for vc04_services ioctl wrappers.   Greg KH
• outreachy   Greg KH
• outreachy   Greg KH
• staging: vc04_services: bcm2835-audio: Adding PWM support to audio driver   Greg KH
• [PATCH] bcm2835-v4l2: Fix buffer overflow problem   Greg KH
• [PATCH] bcm2835-v4l2: Fix buffer overflow problem   Greg KH
• outreachy   Greg KH
• [PATCH 2/5] staging: bcm2835-camera: Fix integer underrun in port_parameter_get   Greg KH
• [PATCH 1/5] bcm2835-camera: Correct port_parameter_get return value   Greg KH
• [PATCH]: staging: vc04_services: fix checkpatch error   Greg KH
• [PATCH] ASoC: bcm_2835: Simplify mono guard by returning error on mono   Florian Kauer
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Charles Keepax
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Charles Keepax
• [PATCH] staging: vc04_services: fix NULL pointer dereference on pointer 'service'   Colin King
• [PATCH] staging: bcm2835-camera: fix spelling mistake: "elementry" -> "elementary"   Colin King
• [PATCH 1/2] staging/vc04_services: initialize cache line size properly   Greg Kroah-Hartman
• [PATCH] vc04_services: Fixing coding and logical guidelines   Greg Kroah-Hartman
• [PATCH] vc04_services: Fixing coding guideline error   Greg Kroah-Hartman
• [PATCH RFC] dwc2: Don't assume URB transfer_buffer are dword-aligned   Greg Kroah-Hartman
• [PATCH RFC] dwc2: Don't assume URB transfer_buffer are dword-aligned   Greg Kroah-Hartman
• [PATCH] vc04_services: Fixing coding guideline error   Greg Kroah-Hartman
• [PATCH RFC] dwc2: Don't assume URB transfer_buffer are dword-aligned   Greg Kroah-Hartman
• [PATCH] staging: vc04_services: bcm2835-audio: fixed checkpatch warning on coding style   Greg Kroah-Hartman
• [PATCH] coding style issue fixed   Vitaly Kuznetsov
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   David Laight
• [Outreachy kernel] [PATCH 0/3] staging: Clean up tests if NULL returned on failure   Julia Lawall
• outreachy   Julia Lawall
• outreachy   Julia Lawall
• outreachy/moving a driver out of staging   Russell King - ARM Linux
• outreachy   Pavel Machek
• outreachy   Pavel Machek
• outreachy   Pavel Machek
• [PATCH V2 2/2] thermal: broadcom: add Northstar thermal driver   Jon Mason
• [PATCH V2 2/2] thermal: broadcom: add Northstar thermal driver   Jon Mason
• [PATCH V2 2/2] thermal: broadcom: add Northstar thermal driver   Jon Mason
• [PATCH] clocksource: add missing line break to error messages   Rafał Miłecki
• [PATCH 1/2] dt-bindings: thermal: add support for Raspberry Pi thermal   Rafał Miłecki
• [PATCH 2/2] thermal: broadcom: add Raspberry Pi thermal driver   Rafał Miłecki
• [PATCH V2 1/2] dt-bindings: thermal: add support for Raspberry Pi thermal   Rafał Miłecki
• [PATCH V2 2/2] thermal: broadcom: add Raspberry Pi thermal driver   Rafał Miłecki
• [PATCH 1/2] dt-bindings: thermal: add support for Raspberry Pi thermal   Rafał Miłecki
• [PATCH V2 1/2] dt-bindings: thermal: add support for Broadcom's Northstar thermal   Rafał Miłecki
• [PATCH V2 2/2] thermal: broadcom: add Northstar thermal driver   Rafał Miłecki
• [PATCH V2 2/2] thermal: broadcom: add Northstar thermal driver   Rafał Miłecki
• [PATCH V2 2/2] thermal: broadcom: add Northstar thermal driver   Rafał Miłecki
• [PATCH V3 1/2] dt-bindings: thermal: add support for Broadcom's Northstar thermal   Rafał Miłecki
• [PATCH V3 2/2] thermal: broadcom: add Northstar thermal driver   Rafał Miłecki
• [PATCH V2 2/2] thermal: broadcom: add Northstar thermal driver   Rafał Miłecki
• [PATCH V4 1/2] dt-bindings: thermal: add support for Broadcom's Northstar thermal   Rafał Miłecki
• [PATCH V4 2/2] thermal: broadcom: add Northstar thermal driver   Rafał Miłecki
• [PATCH V12 4/4] thermal: bcm2835: add thermal driver for bcm2835 SoC   Rafał Miłecki
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Oliver Neukum
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Oliver Neukum
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Oliver Neukum
• [PATCH 04/22] gadget.rst: Enrich its ReST representation and add kernel-doc tag   Jani Nikula
• [PATCH 04/22] gadget.rst: Enrich its ReST representation and add kernel-doc tag   Jani Nikula
• [PATCH 02/22] docs-rst: convert usb docbooks to ReST   Jani Nikula
• [PATCH v2 01/22] tmplcvt: make the tool more robust   Jani Nikula
• [PATCH] staging: bcm2835-audio: remove unnecessary log messages   Aishwarya Pant
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Laurent Pinchart
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Laurent Pinchart
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Laurent Pinchart
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Laurent Pinchart
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Laurent Pinchart
• [PATCH] coding style issue fixed   Andrea della Porta
• [PATCH] staging: vc04_services: bcm2835-audio: fixed checkpatch warning on coding style   Andrea della Porta
• staging: vc04_services: bcm2835-audio Fixed checkpatch issues   Andrea della Porta
• [PATCH 1/3] Fixed checkpatch warning about unaligned function params   Andrea della Porta
• [PATCH 2/3] fixed codepatch coding style issue, line over 80   Andrea della Porta
• [PATCH 3/3] fixed extra space coding issue   Andrea della Porta
• [PATCH] clocksource: add missing line break to error messages   Thierry Reding
• [PATCH linux-next] staging: vchiq_arm: coding style   Sergiy Redko
• [PATCH linux-next] staging: vchiq_arm: coding style   Sergiy Redko
• [PATCH] staging: vc04_services: open brace code style fix   Sergiy Redko
• [PATCH] ASoC: bcm_2835: Simplify mono guard by returning error on mono   Matthias Reichl
• [alsa-devel] [PATCH] ASoC: bcm_2835: Simplify mono guard by returning error on mono   Matthias Reichl
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Matthias Reichl
• [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller   Peter Robinson
• 4.10-rc3 rpi issues   Peter Robinson
• [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller   Peter Robinson
• [PATCH] mmc: bcm2835: Fix possible NULL ptr dereference in bcm2835_request   Peter Robinson
• [PATCH] Staging: media: platform: bcm2835 - Style fix   Derek Robson
• [PATCH] Staging: media: platform: bcm2835 - Style fix   Derek Robson
• [PATCH V2] Staging: bcm2835: Fixed style of block comments   Derek Robson
• [PATCH V11 1/6] of: base: Implement read function for s32 array   Frank Rowand
• [PATCH V11 2/6] thermal: of-thermal: Implement signed coefficient support   Frank Rowand
• [PATCH V11 2/6] thermal: of-thermal: Implement signed coefficient support   Frank Rowand
• usb/net/hso: WARNING: ungligned urb->setup_dma   Baruch Siach
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Alexander Stein
• [PATCH RFC] dwc2: Don't assume URB transfer_buffer are dword-aligned   Alan Stern
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Alan Stern
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Alan Stern
• [PATCH 22/22] usb: document that URB transfer_buffer should be aligned   Alan Stern
• [PATCH] staging: bcm2835-camera: Remove explicit cache flush operations   Dave Stevenson
• [PATCH 08/10] staging: bcm2835-camera: Fix buffer overflow calculation on query of camera properties   Dave Stevenson
• [PATCH 08/10] staging: bcm2835-camera: Fix buffer overflow calculation on query of camera properties   Dave Stevenson
• [PATCH] bcm2835-v4l2: Fix buffer overflow problem   Dave Stevenson
• [PATCH] bcm2835-v4l2: Fix buffer overflow problem   Dave Stevenson
• [PATCH] bcm2835-v4l2: Fix buffer overflow problem   Dave Stevenson
• [PATCH] bcm2835-v4l2: Fix buffer overflow problem   Dave Stevenson
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Dave Stevenson
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Dave Stevenson
• [PATCH V11 2/6] thermal: of-thermal: Implement signed coefficient support   Eduardo Valentin
• [PATCH V11 2/6] thermal: of-thermal: Implement signed coefficient support   Eduardo Valentin
• [PATCH V11 6/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Eduardo Valentin
• [PATCH V11 6/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Eduardo Valentin
• [PATCH V11 6/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Eduardo Valentin
• [PATCH V11 6/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Eduardo Valentin
• [PATCH V2 2/2] thermal: broadcom: add Northstar thermal driver   Eduardo Valentin
• [PATCH V2 1/2] dt-bindings: thermal: add support for Broadcom's Northstar thermal   Eduardo Valentin
• [PATCH 2/3] staging: bcm2835-audio: select BCM2835_VCHIQ rather then depending on it.   Stefan Wahren
• [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.   Stefan Wahren
• [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.   Stefan Wahren
• [PATCH 0/3] mmc: bcm2835: fourth cleanup for sdhost driver   Stefan Wahren
• [PATCH 1/3] mmc: bcm2835: Fix documentation about SDHSTS register   Stefan Wahren
• [PATCH 2/3] mmc: bcm2835: Don't exit cmd wait loop on error   Stefan Wahren
• [PATCH 3/3] mmc: bcm2835: Remove an unnecessary reset call   Stefan Wahren
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Stefan Wahren
• [PATCH linux-next] staging: vchiq_arm: coding style   Stefan Wahren
• usb/net/hso: WARNING: ungligned urb->setup_dma   Stefan Wahren
• [PATCH V10 0/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Stefan Wahren
• [PATCH V10 1/6] of: base: Implement read function for s32 array   Stefan Wahren
• [PATCH V10 2/6] thermal: of-thermal: Implement signed coefficient support   Stefan Wahren
• [PATCH V10 3/6] dt-bindings: Add thermal zone to bcm2835-thermal example   Stefan Wahren
• [PATCH V10 4/6] ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point   Stefan Wahren
• [PATCH V10 5/6] ARM64: dts: bcm2837: Define CPU thermal coefficients   Stefan Wahren
• [PATCH V10 6/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Stefan Wahren
• [PATCH linux-next] staging: vchiq_arm: coding style   Stefan Wahren
• [PATCH RFC] ARM: bcm2835: Enable missing CMA settings for VC4 driver   Stefan Wahren
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Stefan Wahren
• [PATCH RFC] ARM: bcm2835: Enable missing CMA settings for VC4 driver   Stefan Wahren
• [PATCH] staging: vchiq_utils: Don't include headers twice   Stefan Wahren
• [PATCH v4 3/7] mmc: bcm2835: add sdhost controller to devicetree   Stefan Wahren
• bcm2835-analog-audio: Is my driver PWM, ALSA or neither   Stefan Wahren
• [PATCH V11 0/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Stefan Wahren
• [PATCH V11 1/6] of: base: Implement read function for s32 array   Stefan Wahren
• [PATCH V11 2/6] thermal: of-thermal: Implement signed coefficient support   Stefan Wahren
• [PATCH V11 3/6] dt-bindings: Add thermal zone to bcm2835-thermal example   Stefan Wahren
• [PATCH V11 4/6] ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point   Stefan Wahren
• [PATCH V11 5/6] ARM64: dts: bcm2837: Define CPU thermal coefficients   Stefan Wahren
• [PATCH V11 6/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Stefan Wahren
• [PATCH 4/4] dts: bcm283x.dtsi: Add analog audio/headphone jack for bcm2835   Stefan Wahren
• [PATCH 2/2] staging: bcm2835-audio: Disable extra virtual cards by default   Stefan Wahren
• [alsa-devel] [PATCH 3/4] sound: arm: Add build system for bcm2835-analog-audio driver.   Stefan Wahren
• [PATCH 4/4] dts: bcm283x.dtsi: Add analog audio/headphone jack for bcm2835   Stefan Wahren
• [PATCH] staging: vc04_services: Remove unused functions   Stefan Wahren
• [PATCH] bcm2835-v4l2: Fix buffer overflow problem   Stefan Wahren
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Stefan Wahren
• [PATCH 0/6] staging: bcm2835-firmware-gpio: Initial staging commit   Stefan Wahren
• [PATCH 0/6] staging: bcm2835-firmware-gpio: Initial staging commit   Stefan Wahren
• [PATCH] staging: vchiq_arm: Fix MODULE_LICENSE   Stefan Wahren
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Stefan Wahren
• [PATCH 2/6] staging: bcm2835-firmware-gpio: Add needed mailbox defines to driver   Stefan Wahren
• [PATCH 3/6] staging: bcm2835-firmware-gpio: Expand DT options for driver   Stefan Wahren
• [PATCH 5/6] staging: bcm2835-firmware-gpio: Add a build system for the driver   Stefan Wahren
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Stefan Wahren
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Stefan Wahren
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Stefan Wahren
• [PATCH] staging: vc04_services: fix NULL pointer dereference on pointer 'service'   Stefan Wahren
• [PATCH V11 0/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Stefan Wahren
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Stefan Wahren
• [PATCH V11 6/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Stefan Wahren
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Stefan Wahren
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Stefan Wahren
• [PATCH V11 2/6] thermal: of-thermal: Implement signed coefficient support   Stefan Wahren
• [GIT PULL 1/4] bcm2835 arm DT updates for 4.12   Stefan Wahren
• [PATCH] mmc: bcm2835: Fix possible NULL ptr dereference in bcm2835_request   Stefan Wahren
• [PATCH] mmc: bcm2835: Fix possible NULL ptr dereference in bcm2835_request   Stefan Wahren
• [PATCH V11 6/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Stefan Wahren
• [PATCH V11 6/6] thermal: bcm2835: add thermal driver for bcm2835 SoC   Stefan Wahren
• [PATCH V12 0/4] thermal: bcm2835: add thermal driver for bcm2835 SoC   Stefan Wahren
• [PATCH V12 1/4] dt-bindings: Add thermal zone to bcm2835-thermal example   Stefan Wahren
• [PATCH V12 2/4] ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point   Stefan Wahren
• [PATCH V12 3/4] ARM64: dts: bcm2837: Define CPU thermal coefficients   Stefan Wahren
• [PATCH V12 4/4] thermal: bcm2835: add thermal driver for bcm2835 SoC   Stefan Wahren
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Linus Walleij
• [PATCH 1/2] spi: Allow master drivers to set realtime priority   Linus Walleij
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Linus Walleij
• outreachy   Stephen Warren
• [alsa-devel] [PATCH 0/3] ASoC: Enable a new IC master mode: bcm2835<=>IC<=>cs42xx8   Stephen Warren
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Lukas Wunner
• [PATCH 1/2] spi: Allow master drivers to set realtime priority   Lukas Wunner
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Lukas Wunner
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Lukas Wunner
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Lukas Wunner
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Lukas Wunner
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   Lukas Wunner
• [PATCH 2/3] staging: bcm2835-audio: select BCM2835_VCHIQ rather then depending on it.   Michael Zoran
• [PATCH 1/2] staging/vc04_services: initialize cache line size properly   Michael Zoran
• [PATCH V2 0/3] staging: vc04-services: Create new toplevel config BCM_VIDEOCORE   Michael Zoran
• [PATCH V2 1/3] staging: vc04_services: Create new BCM_VIDEOCORE setting for VideoCore services.   Michael Zoran
• [PATCH V2 2/3] staging: bcm2835-audio: select BCM2835_VCHIQ rather then depending on it.   Michael Zoran
• [PATCH V2 3/3] staging: bcm2835-camera: select BCM2835_VCHIQ rather then depending on it.   Michael Zoran
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Michael Zoran
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Michael Zoran
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Michael Zoran
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Michael Zoran
• Investigating a headphone driver for RPI   Michael Zoran
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Michael Zoran
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Michael Zoran
• [RESEND PATCH V4] staging: vchiq_arm: Add compatibility wrappers for ioctls   Michael Zoran
• [RFC PATCH] sound: bcm2835-analog-audio: Add driver for bcm2835(Raspberry PI) headphone jack.   Michael Zoran
• [RFC PATCH] sound: bcm2835-analog-audio: Add driver for bcm2835(Raspberry PI) headphone jack.   Michael Zoran
• [PATCH V5 0/2] staging: vchiq_arm: Add compatibility wrappers for ioctls   Michael Zoran
• [PATCH V5 1/2] staging: vchiq_arm: Add compatibility wrappers for ioctls   Michael Zoran
• [PATCH V5 2/2] staging: vchiq_arm: Disable ability to dump memory by default   Michael Zoran
• [PATCH] staging: bcm2835-camera: Remove explicit cache flush operations   Michael Zoran
• Status of V5 patch for vc04_services ioctl wrappers.   Michael Zoran
• [PATCH 0/2] staging: bcm2835_camera: Fix pointer dependency of mmal_msg_header   Michael Zoran
• [PATCH 1/2] staging: bcm2835_camera: Convert control_service field of mmal_msg_header to u32   Michael Zoran
• [PATCH 2/2] staging: bcm2835_camera: Use a mapping table for context field of mmal_msg_header   Michael Zoran
• [PATCH 00/10] staging: bcm2835-camera: Finish ARM64 port   Michael Zoran
• [PATCH 01/10] staging: bcm2835-camera: Create struct mmal_es_format_local to mirror struct mmal_es_format   Michael Zoran
• [PATCH 02/10] staging: bcm2835-camera: Convert client_component field to u32   Michael Zoran
• [PATCH 03/10] staging: bcm2835-camera: Convert delayed_buffer to u32   Michael Zoran
• [PATCH 04/10] staging: bcm2835-camera: Convert client_context field to a 32 bit handle   Michael Zoran
• [PATCH 05/10] staging: bcm2835-camera: Convert struct mmal_port info fields to u32   Michael Zoran
• [PATCH 06/10] staging: bcm2835-camera: Convert struct mmal_buffer_header info fields to u32   Michael Zoran
• [PATCH 07/10] staging: bcm2835-camera: Convert spinlock to mutex in handle mapping code   Michael Zoran
• [PATCH 08/10] staging: bcm2835-camera: Fix buffer overflow calculation on query of camera properties   Michael Zoran
• [PATCH 09/10] staging: bcm2835-camera: Fix bogus compiler warnings regarding constants   Michael Zoran
• [PATCH 10/10] staging: bcm2835-camera: remove depends on ARM   Michael Zoran
• [PATCH] staging: vchi: Remove ARM64 from TODO list   Michael Zoran
• [PATCH 08/10] staging: bcm2835-camera: Fix buffer overflow calculation on query of camera properties   Michael Zoran
• [PATCH 1/4] dt-bindings: Document the dmas and dma-names properties for bcm2835-analog-audio   Michael Zoran
• [PATCH 2/4] sound: bcm2835-analog-audio: Add driver for bcm2835(Raspberry PI) headphone jack.   Michael Zoran
• [PATCH 3/4] sound: arm: Add build system for bcm2835-analog-audio driver.   Michael Zoran
• [PATCH 4/4] dts: bcm283x.dtsi: Add analog audio/headphone jack for bcm2835   Michael Zoran
• [RFC PATCH] sound: bcm2835-analog-audio: Add driver for bcm2835(Raspberry PI) headphone jack.   Michael Zoran
• bcm2835-analog-audio: Is my driver PWM, ALSA or neither   Michael Zoran
• staging: vc04_services: bcm2835-audio: Adding PWM support to audio driver   Michael Zoran
• bcm2835-analog-audio: Is my driver PWM, ALSA or neither   Michael Zoran
• bcm2835-analog-audio: Is my driver PWM, ALSA or neither   Michael Zoran
• Cool RPI benchmark research that was posted on the Internet   Michael Zoran
• [PATCH 1/2] staging: bcm2835-audio: Add support for simultanous HDMI and Headphone audio   Michael Zoran
• [PATCH 2/2] staging: bcm2835-audio: Disable extra virtual cards by default   Michael Zoran
• [PATCH 4/4] dts: bcm283x.dtsi: Add analog audio/headphone jack for bcm2835   Michael Zoran
• [PATCH 2/2] staging: bcm2835-audio: Disable extra virtual cards by default   Michael Zoran
• [alsa-devel] [PATCH 3/4] sound: arm: Add build system for bcm2835-analog-audio driver.   Michael Zoran
• [alsa-devel] [PATCH 3/4] sound: arm: Add build system for bcm2835-analog-audio driver.   Michael Zoran
• [PATCH 4/4] dts: bcm283x.dtsi: Add analog audio/headphone jack for bcm2835   Michael Zoran
• [PATCH 2/2] staging: bcm2835-audio: Disable extra virtual cards by default   Michael Zoran
• [PATCH V2 0/1] staging: bcm2835-audio: Add support for simultanous HDMI and Headphone audio   Michael Zoran
• [PATCH V2 1/1] staging: bcm2835-audio: Add support for simultanous HDMI and Headphone audio   Michael Zoran
• [PATCH] bcm2835-v4l2: Fix buffer overflow problem   Michael Zoran
• [PATCH V3 0/1] staging: bcm2835-audio: Add support for simultanous HDMI and Headphone audio   Michael Zoran
• [PATCH V3 1/1] staging: bcm2835-audio: Add support for simultanous HDMI and Headphone audio   Michael Zoran
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Michael Zoran
• [PATCH 0/6] staging: bcm2835-firmware-gpio: Initial staging commit   Michael Zoran
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Michael Zoran
• [PATCH 2/6] staging: bcm2835-firmware-gpio: Add needed mailbox defines to driver   Michael Zoran
• [PATCH 3/6] staging: bcm2835-firmware-gpio: Expand DT options for driver   Michael Zoran
• [PATCH 4/6] staging: bcm2835-firmware-gpio: Add brcm, bcm2835-firmware-gpio to compatible list   Michael Zoran
• [PATCH 5/6] staging: bcm2835-firmware-gpio: Add a build system for the driver   Michael Zoran
• [PATCH 6/6] staging: vc04_services: Update makefile to use CONFIG_BCM_VIDEOCORE   Michael Zoran
• [PATCH 0/6] staging: bcm2835-firmware-gpio: Initial staging commit   Michael Zoran
• [PATCH 0/6] staging: bcm2835-firmware-gpio: Initial staging commit   Michael Zoran
• [PATCH 0/5] staging: vc04_services: camera driver maintance   Michael Zoran
• [PATCH 1/5] bcm2835-camera: Correct port_parameter_get return value   Michael Zoran
• [PATCH 2/5] staging: bcm2835-camera: Fix integer underrun in port_parameter_get   Michael Zoran
• [PATCH 3/5] staging: vchiq_arm: Add vchiq_remove_connected_callback   Michael Zoran
• [PATCH 4/5] staging: bcm2835-camera: Fix TODO issue #4 where camera doesn't start if vchiq isn't connected.   Michael Zoran
• [PATCH 5/5] staging: bcm2835-camera: Remove 2 completed issues from TODO list   Michael Zoran
• [PATCH RFC] dwc2: Don't assume URB transfer_buffer are dword-aligned   Michael Zoran
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Michael Zoran
• [PATCH 5/6] staging: bcm2835-firmware-gpio: Add a build system for the driver   Michael Zoran
• VC4 GPIO support possibly broken   Michael Zoran
• [PATCH 5/6] staging: bcm2835-firmware-gpio: Add a build system for the driver   Michael Zoran
• [PATCH 3/6] staging: bcm2835-firmware-gpio: Expand DT options for driver   Michael Zoran
• outreachy/moving a driver out of staging   Michael Zoran
• outreachy/moving a driver out of staging   Michael Zoran
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Michael Zoran
• Minecraft_pi now works in Raspbian with arm64 kernel from staging-testing   Michael Zoran
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Michael Zoran
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Michael Zoran
• [PATCH 5/6] staging: bcm2835-firmware-gpio: Add a build system for the driver   Michael Zoran
• [PATCH 0/5] staging: vc04_services: camera driver maintance   Michael Zoran
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Michael Zoran
• [PATCH 0/5] staging: vc04_services: camera driver maintance   Michael Zoran
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Michael Zoran
• [PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver   Michael Zoran
• [alsa-devel] [PATCH 1/4] dt-bindings: Document the dmas and dma-names properties for bcm2835-analog-audio   Michael Zoran
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Michael Zoran
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Michael Zoran
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Michael Zoran
• [PATCH 0/5] staging: vc04_services: camera driver maintance   Michael Zoran
• Minecraft_pi now works in Raspbian with arm64 kernel from staging-testing   Michael Zoran
• Eric Anholt offically announces support of VC4 without access to expander on the RPI 3   Michael Zoran
• [PATCH 1/5] bcm2835-camera: Correct port_parameter_get return value   Michael Zoran
• [PATCH 2/5] staging: bcm2835-camera: Fix integer underrun in port_parameter_get   Michael Zoran
• [PATCH 2/5] staging: bcm2835-camera: Fix integer underrun in port_parameter_get   Michael Zoran
• [alsa-devel] [PATCH 1/4] dt-bindings: Document the dmas and dma-names properties for bcm2835-analog-audio   Michael Zoran
• broken edid   Michael Zoran
• broken edid   Michael Zoran
• broken edid   Michael Zoran
• Eric Anholt offically announces support of VC4 without access to expander on the RPI 3   Michael Zoran
• Eric Anholt offically announces support of VC4 without access to expander on the RPI 3   Michael Zoran
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Michael Zoran
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Michael Zoran
• [PATCH 1/6] bcm2835-gpio-exp: Driver for GPIO expander via mailbox service   Michael Zoran
• [PATCH 2/2] spi: bcm2835: Allow platform to set realtime priority   kernel at martin.sperl.org
• [PATCH V10 5/6] ARM64: dts: bcm2837: Define CPU thermal coefficients   kbuild test robot
• [alsa-devel] [PATCH 3/4] sound: arm: Add build system for bcm2835-analog-audio driver.   kbuild test robot
• [PATCH] staging: bcm2835-firmware-gpio: fix platform_no_drv_owner.cocci warnings   kbuild test robot
• [PATCH 5/6] staging: bcm2835-firmware-gpio: Add a build system for the driver   kbuild test robot
• [PATCH 4/5] staging: bcm2835-camera: Fix TODO issue #4 where camera doesn't start if vchiq isn't connected.   kbuild test robot
• [PATCH 4/5] staging: bcm2835-camera: Fix TODO issue #4 where camera doesn't start if vchiq isn't connected.   kbuild test robot
• [PATCH 01/22] driver-api/basics.rst: add device table header   kbuild test robot
• [PATCH 0/3] staging: Clean up tests if NULL returned on failure   simran singhal
• [PATCH 1/3] staging: rtl8192u: Clean up tests if NULL returned on failure   simran singhal
• [PATCH 2/3] staging: speakup: Clean up tests if NULL returned on failure   simran singhal
• [PATCH 3/3] staging: vc04_services: Clean up tests if NULL returned on failure   simran singhal

Last message date: Fri Mar 31 14:22:44 PDT 2017
Archived on: Sat Apr 15 03:37:53 PDT 2017

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...