[PATCH 0/6] staging: BCM2835 MMAL V4L2 camera driver
Mauro Carvalho Chehab
mchehab at s-opensource.com
Mon Mar 20 07:58:21 PDT 2017
Em Mon, 20 Mar 2017 04:08:21 -0700
Michael Zoran <mzoran at crowfest.net> escreveu:
> On Mon, 2017-03-20 at 07:58 -0300, Mauro Carvalho Chehab wrote:
> > Em Sun, 19 Mar 2017 22:11:07 -0300
> > Mauro Carvalho Chehab <mchehab at s-opensource.com> escreveu:
> >
> > > Em Sun, 19 Mar 2017 10:04:28 -0700
> > > Michael Zoran <mzoran at crowfest.net> escreveu:
> > >
> > > > A working DT that I tried this morning with the current firmware
> > > > is
> > > > posted here:
> > > > http://lists.infradead.org/pipermail/linux-rpi-kernel/2017-March/
> > > > 005924
> > > > .html
> > > >
> > > > It even works with minecraft_pi!
> >
> > With the new firmware, sometime after booting, I'm getting an oops,
> > caused
> > by bcm2835_audio/vchiq:
> >
> > [ 298.788995] Unable to handle kernel NULL pointer dereference at
> > virtual address 00000034
> > [ 298.821458] pgd = ed004000
> > [ 298.832294] [00000034] *pgd=2e5e9835, *pte=00000000,
> > *ppte=00000000
> > [ 298.857450] Internal error: Oops: 17 [#1] SMP ARM
> > [ 298.876273] Modules linked in: cfg80211 hid_logitech_hidpp
> > hid_logitech_dj snd_bcm2835(C) snd_pcm snd_timer snd soundcore
> > vchiq(C) uio_pdrv_genirq uio fuse
> > [ 298.932064] CPU: 3 PID: 847 Comm: pulseaudio Tainted:
> > G C 4.11.0-rc1+ #56
> > [ 298.963774] Hardware name: Generic DT based system
> > [ 298.982945] task: ef758580 task.stack: ee4c6000
> > [ 299.001080] PC is at mutex_lock+0x14/0x3c
> > [ 299.017148] LR is at vchiq_add_service_internal+0x138/0x3a0
> > [vchiq]
> > [ 299.042246] pc : [<c0c849d4>] lr : [<bf059654>] psr:
> > 40000013
> > sp : ee4c7ca8 ip : 00000000 fp : ef709800
> > [ 299.088240] r10: 00000000 r9 : ee3bffc0 r8 : 00000034
> > [ 299.109153] r7 : 00000003 r6 : 00000000 r5 : ee4c7d00 r4 :
> > ee1d8c00
> > [ 299.135291] r3 : ef758580 r2 : 00000000 r1 : ffffffc8 r0 :
> > 00000034
> > [ 299.161431] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA
> > ARM Segment none
> > [ 299.190008] Control: 10c5383d Table: 2d00406a DAC: 00000051
> > [ 299.213011] Process pulseaudio (pid: 847, stack limit =
> > 0xee4c6220)
> > [ 299.238104] Stack: (0xee4c7ca8 to 0xee4c8000)
> > [ 299.255539] 7ca0: c1403d54 80400040 ff7f0600
> > ff7f0660 bf06b578 ee3bffc0
> > [ 299.288301] 7cc0: 00000000 ee3afd00 00000000 ee4c7d00 00000000
> > bf0640b4 00000000 bf066428
> > [ 299.321064] 7ce0: ee3afd00 ee3afd00 ee4c7d34 ee3af444 ee3bffc0
> > ee3af444 ee3bffc0 bf0662ec
> > [ 299.353826] 7d00: 41554453 bf065db0 ee3afd00 00010002 bf0d7408
> > ee3af440 00000000 bf0d7408
> > [ 299.386587] 7d20: ee79bd80 bf0d5a04 00000000 ef709800 00000020
> > 00000002 00000001 41554453
> > [ 299.419349] 7d40: 00000000 00000000 00000000 bf0d559c ee3af440
> > 00000001 00000001 00000000
> > [ 299.452111] 7d60: ee24ac80 ee24ac80 ee1c4a00 00000000 ee79bd80
> > ee24ace8 00000001 bf0d4dfc
> > [ 299.484872] 7d80: 0000000b ffffffff ee4b8c3c 00000000 ee4c7dc8
> > ee4b8800 ee4b8c28 ee4c6000
> > [ 299.517635] 7da0: 00000000 ee4b8c3c ed029e40 bf0c0404 ee4b8800
> > ee1c4a00 ee4b8800 ed029e40
> > [ 299.550398] 7dc0: 00000000 bf0c0560 ee072340 00000000 ef758580
> > c0367b7c ee4b8c40 ee4b8c40
> > [ 299.583161] 7de0: 00000000 ee4b8800 ed029e40 ee318f80 ed029e40
> > 00000006 ee318f80 bf0c0748
> > [ 299.615924] 7e00: bf0a3430 ee4f6180 00000000 c0428fe0 ee318f80
> > 000021b0 00000026 ed029e40
> > [ 299.648697] 7e20: ee318f80 ed029e48 c0428f1c ee4c7e94 00000006
> > c0421cc0 ee4c7ed0 00000000
> > [ 299.681464] 7e40: 00000802 00000000 ee4c7e94 00000006 ee318f80
> > c0432c8c ee4c7f40 c0433bc0
> > [ 299.714225] 7e60: 00000000 ed029e40 00000000 00000041 00000000
> > ed004000 00000000 ee4c6000
> > [ 299.746987] 7e80: eec69808 00000005 00000000 00000002 ee318f80
> > ef0d2910 ee924908 bf0ba284
> > [ 299.779750] 7ea0: ee31bbc0 bebb53c4 ee4e1d00 00000011 ee4c7f74
> > 00000001 fffff000 c0308b04
> > [ 299.812512] 7ec0: ee4c6000 00000000 bebb5710 c0434578 ef0d2910
> > ee924908 73541c18 00000008
> > [ 299.845274] 7ee0: ee4a7019 00000000 00000000 ee899bb0 ee318f80
> > 00000101 00000002 00000084
> > [ 299.878037] 7f00: 00000000 00000000 00000000 ee4c7f10 ee318df8
> > ed029840 40045532 bebb53c4
> > [ 299.910799] 7f20: ee4c6000 ee4a7000 c1403ef8 bebb550c 00000011
> > ee5eca00 00000020 ee5eca18
> > [ 299.943562] 7f40: ee4a7000 00000000 00080802 00000002 ffffff9c
> > fffff000 00000011 ffffff9c
> > [ 299.976324] 7f60: ee4a7000 c0422e70 00000002 c04359b0 ed029840
> > 00000802 ed020000 00000006
> > [ 300.009086] 7f80: 00000100 00000001 00000000 ffffffff 00000004
> > b189d000 00000005 c0308b04
> > [ 300.041848] 7fa0: ee4c6000 c0308940 ffffffff 00000004 bebb550c
> > 00080802 bebb53c4 00084b58
> > [ 300.074611] 7fc0: ffffffff 00000004 b189d000 00000005 00000000
> > bebb550c 00099448 bebb5710
> > [ 300.107373] 7fe0: 00000000 bebb53c8 b6c40da4 b6c24334 80000010
> > bebb550c 2fffd861 2fffdc61
> > [ 300.140190] [<c0c849d4>] (mutex_lock) from [<bf059654>]
> > (vchiq_add_service_internal+0x138/0x3a0 [vchiq])
> > [ 300.178237] [<bf059654>] (vchiq_add_service_internal [vchiq]) from
> > [<bf0640b4>] (vchiq_open_service+0x58/0xf0 [vchiq])
> > [ 300.221152] [<bf0640b4>] (vchiq_open_service [vchiq]) from
> > [<bf0662ec>] (vchi_service_open+0x74/0xa8 [vchiq])
> > [ 300.260919] [<bf0662ec>] (vchi_service_open [vchiq]) from
> > [<bf0d5a04>] (bcm2835_audio_open+0xe8/0x2d0 [snd_bcm2835])
> > [ 300.303111] [<bf0d5a04>] (bcm2835_audio_open [snd_bcm2835]) from
> > [<bf0d4dfc>] (snd_bcm2835_playback_open_generic+0xc0/0x1c4
> > [snd_bcm2835])
> > [ 300.352975] [<bf0d4dfc>] (snd_bcm2835_playback_open_generic
> > [snd_bcm2835]) from [<bf0c0404>] (snd_pcm_open_substream+0x60/0x110
> > [snd_pcm])
> > [ 300.402848] [<bf0c0404>] (snd_pcm_open_substream [snd_pcm]) from
> > [<bf0c0560>] (snd_pcm_open+0xac/0x1fc [snd_pcm])
> > [ 300.444009] [<bf0c0560>] (snd_pcm_open [snd_pcm]) from
> > [<bf0c0748>] (snd_pcm_playback_open+0x3c/0x5c [snd_pcm])
> > [ 300.484459] [<bf0c0748>] (snd_pcm_playback_open [snd_pcm]) from
> > [<c0428fe0>] (chrdev_open+0xc4/0x180)
> > [ 300.521408] [<c0428fe0>] (chrdev_open) from [<c0421cc0>]
> > (do_dentry_open.constprop.3+0x1fc/0x304)
> > [ 300.556964] [<c0421cc0>] (do_dentry_open.constprop.3) from
> > [<c0432c8c>] (path_openat+0x588/0x1078)
> > [ 300.592866] [<c0432c8c>] (path_openat) from [<c0434578>]
> > (do_filp_open+0x60/0xc4)
> > [ 300.622846] [<c0434578>] (do_filp_open) from [<c0422e70>]
> > (do_sys_open+0x110/0x1c0)
> > [ 300.653524] [<c0422e70>] (do_sys_open) from [<c0308940>]
> > (ret_fast_syscall+0x0/0x3c)
> >
> >
> Hi, can you e-mail out your config.txt? Do you have audio enabled in
> config.txt?
yes, I have this:
$ cat config.txt |grep -i audio
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
Full config attached.
Thanks,
Mauro
---
# Latest RPi Kernel
#kernel=rpi-4.10.y/vmlinuz-4.11.0-rc2-v8+
#device_tree=rpi-4.10.y/bcm2837-rpi-3-b.dtb
# Upstream Kernel
kernel=upstream/vmlinuz-4.11.0-rc1+
device_tree=upstream/bcm2837-rpi-3-b.dtb
# For more options and information see
# http://rpf.io/configtxtreadme
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
# NOOBS Auto-generated Settings:
hdmi_force_hotplug=1
start_x=1
gpu_mem=128
enable_uart=1
More information about the linux-rpi-kernel
mailing list