[PATCH 1/2] dt-bindings: thermal: add support for Raspberry Pi thermal
Rafał Miłecki
zajec5 at gmail.com
Fri Mar 17 17:01:31 PDT 2017
From: Rafał Miłecki <rafal at milecki.pl>
This commit documents binding for BCM2835 SoC thermal used in Raspberry
Pi devices.
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
.../bindings/thermal/raspberrypi,bcm2835-thermal | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal
diff --git a/Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal b/Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal
new file mode 100644
index 000000000000..fbffa9291ba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal
@@ -0,0 +1,17 @@
+* Broadcom BCM2835 SoC Raspberry Pi Thermal
+
+This binding describes thermal sensor that is part of BCM2835 SoC.
+
+Required properties:
+- compatible : Must be "raspberrypi,bcm2835-thermal"
+- firmware : Reference to the Raspberry Pi firmware device node, see
+ raspberrypi,bcm2835-firmware for details
+- #thermal-sensor-cells : Should be <0>
+
+Example:
+
+thermal {
+ compatible = "raspberrypi,bcm2835-thermal";
+ firmware = <&firmware>;
+ #thermal-sensor-cells = <0>;
+};
--
2.11.0
More information about the linux-rpi-kernel
mailing list