[PATCH 4/4] dts: bcm283x.dtsi: Add analog audio/headphone jack for bcm2835

Stefan Wahren stefan.wahren at i2se.com
Tue Mar 14 03:07:35 PDT 2017


Am 14.03.2017 um 09:47 schrieb Michael Zoran:
> On Tue, 2017-03-14 at 09:05 +0100, Stefan Wahren wrote:
>
>> AFAIK the Raspberry Pi 3 uses pin 40 and 41.
>>
> I did all my testing on the RPI 3, so I'm almost certain it's correct. 
> It matches with the schematic and it matches with what the downstream
> tree uses for the firmware based driver(dummy claiming of pins).

The reduced schematic that i have name the pins as AUD_PWM0 and
AUD_PWM1, which says nothing about the actual pins. Do you have a better
document?

In the firmware dt-blob.dts [1] the Raspberry Pi 3 uses pin 40 and 41.

[1] - https://github.com/raspberrypi/firmware/blob/master/extra/dt-blob.dts



More information about the linux-rpi-kernel mailing list