[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v4)

Eric Anholt eric at anholt.net
Wed Mar 29 17:26:05 PDT 2017

Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
now, so it's useful to be able to test that mode on an upstream
kernel.  It's also been useful for me to use the same board for 32-bit
and 64-bit development.

Signed-off-by: Eric Anholt <eric at anholt.net>

v1: Gerd's patch that put the ../../../arm64/... link in the Makefile
v2: Michael's patch that #included from ../../../arm64/... in a new
v3: Mine, using symlinks to make sure that we don't break the split DT
v4: Rely on the new include/arm64 symlink.

Assuming positive review feedback, I assume it would be acceptable to
merge the shared/dt-symlinks branch in a PR of my own for the 32-bit
DT branch?

 arch/arm/boot/dts/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 011808490fed..27d258cb50f2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b-plus.dtb \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2836-rpi-2-b.dtb \
+	include/arm64/broadcom/bcm2837-rpi-3-b.dtb \
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \

More information about the linux-rpi-kernel mailing list