May 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu May 2 05:07:10 EDT 2013
Ending: Fri May 31 21:56:40 EDT 2013
Messages: 585

• imx31 bcb   Rodney Antonisse
• [PATCH v2 1/2] tegra20: add pinctrl driver   Alexander Aring
• [PATCH] mtd-core: fix mtd erase operation for non-uniform flashes.   Renaud Barbier
• [PATCH] mtd: call mtd_erase with complete area if possible   Renaud Barbier
• [PATCH] gianfar: prevent resource conflict   Renaud Barbier
• [PATCH 1/2] ppc io.h: fix indentation   Renaud Barbier
• [PATCH 2/2] ppc: update I/O accessors   Renaud Barbier
• [PATCH 0/8] U-Boot DDR initialisation import   Renaud Barbier
• [PATCH 1/8] ppc 8xxx: DDR headers   Renaud Barbier
• [PATCH 2/8] ppc 8xxx: memory controller register manipulation functions   Renaud Barbier
• [PATCH 3/8] ppc 8xxx: dimm parameters calculation   Renaud Barbier
• [PATCH 4/8] ppc 8xxx: lowest common dimm parameters   Renaud Barbier
• [PATCH 5/8] ppc 8xxx: DDR utility functions   Renaud Barbier
• [PATCH 6/8] ppc 8xxx: DDR specific options   Renaud Barbier
• [PATCH 7/8] ppc 8xxx: core DDR driver functions   Renaud Barbier
• [PATCH 8/8] ppc 8xxx: remove interactive debugging   Renaud Barbier
• [PATCH] MCI/MXS: fix signed/unsigned mismatch   Juergen Beisert
• MXS: fix SoC detecting   Juergen Beisert
• [RFC] MXS/i.MX23: detecting the boot source   Juergen Beisert
• Unable to Boot from NAND on Mini2440   Juergen Beisert
• [RFC] MXS/i.MX23: detecting the boot source   Juergen Beisert
• [PATCH] MXS/i.MX23: add boot source detection   Juergen Beisert
• Unable to Boot from NAND on Mini2440   Juergen Beisert
• [PATCH 2/6] mci: do not limit clock to card capabilities   Juergen Beisert
• [PATCH 1/6] mci: print current clock in info   Juergen Beisert
• [PATCH 3/6] mci: rename trans_speed field to csd_max_dtr   Juergen Beisert
• [PATCH 4/6] mci: Use csd_max_dtr when appropriate   Juergen Beisert
• [PATCH] sama5d3xek: correct rootfs nand partition   Alexandre Belloni
• [PATCH] nand_base: fix to test for JCPV problem   Eric Bénard
• [PATCH 1/1] Revert "nand_base: detect more ONFI flash"   Eric Bénard
• [PATCH v2] nand_base: fix to test for JCPV problem   Eric Bénard
• [PATCH] nand_base: fix to test for JCPV problem   Eric Bénard
• [PATCH v3] nand_base: sync flash detection functions with linux 3.9's code   Eric Bénard
• [PATCH v2] nand_base: fix to test for JCPV problem   Eric Bénard
• [PATCH v3] nand_base: sync flash detection functions with linux 3.9's code   Eric Bénard
• [PATCH v3] nand_base: sync flash detection functions with linux 3.9's code   Eric Bénard
• Installing barebox for karo-tx53 in nand-flash   Eric Bénard
• Installing barebox for karo-tx53 in nand-flash   Eric Bénard
• [PATCH v2] nand_base: sync flash detection functions with linux 3.9's code   Eric Bénard
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Gregory CLEMENT
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Gregory CLEMENT
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Gregory CLEMENT
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Gregory CLEMENT
• [PATCH v2 0/7] Basic support for Armada 370/XP SOCs   Gregory CLEMENT
• [PATCH v2 0/7] Basic support for Armada 370/XP SOCs   Gregory CLEMENT
• [PATCH v2 4/7] arm: integrate kwbimage in the image generation   Gregory CLEMENT
• [PATCH v3 0/7] Basic support for Armada 370/XP SOCs   Gregory CLEMENT
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Jason Cooper
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Jason Cooper
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Jason Cooper
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Jason Cooper
• [PATCH v3 2/7] scripts: add kwboot tool   Jason Cooper
• [PATCH] ARM i.MX6: set imx6 silicon revision   Fricke, Silvio
• Installing barebox for karo-tx53 in nand-flash   Christoph Fritz
• [PATCH RFC 1/2] bootm: Simplify initrd address handling   Sascha Hauer
• [PATCH 1/3] ARM: pcm038: Add descriptions for pin-groups   Sascha Hauer
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Sascha Hauer
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Sascha Hauer
• [PATCH 5/7] arm: add basic support for Armada XP OpenBlocks AX3 platform   Sascha Hauer
• [PATCH] clkdev: fix typo   Sascha Hauer
• [PATCH 1/7] scripts: allow lines longer than 80 cols with printf() in checkpatch   Sascha Hauer
• [PATCH] ARM: ccmx51js: Add support for USB Host1   Sascha Hauer
• v2013.05.0   Sascha Hauer
• OTG Device mode on i.MX51   Sascha Hauer
• [PATCH 4/7] arm: initial support for Marvell Armada 370/XP SoCs   Sascha Hauer
• OTG Device mode on i.MX51   Sascha Hauer
• [PATCH 4/7] arm: initial support for Marvell Armada 370/XP SoCs   Sascha Hauer
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Sascha Hauer
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Sascha Hauer
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Sascha Hauer
• [PATCH 1/2] tegra20: add pinctrl driver   Sascha Hauer
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Sascha Hauer
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Sascha Hauer
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Sascha Hauer
• [PATCH 0/2] ARM i.MX31: define fix, IOMUX GPR setup fix for pcm037   Sascha Hauer
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Sascha Hauer
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Sascha Hauer
• Installing barebox for karo-tx53   Sascha Hauer
• [PATCH 1/1] Revert "nand_base: detect more ONFI flash"   Sascha Hauer
• [PATCH 1/1] commands/mem.c: drop non used DEVMEM   Sascha Hauer
• [PATCH 1/1] qt1070: drop non used buf   Sascha Hauer
• [PATCH] sama5d3xek: correct rootfs nand partition   Sascha Hauer
• [PATCH 2/2] ARM: i.MX: ccxmx51: detect SDRAM size by board id   Sascha Hauer
• [PATCH 1/2] tegra20: add pinctrl driver   Sascha Hauer
• [PATCH] Added sd driver for bcm2835 (Raspberry PI)   Sascha Hauer
• [PATCH 1/2] ARM: Make OMAP syslib.c functions available for other ARM targets   Sascha Hauer
• MIPS: xburst: use common serial code   Sascha Hauer
• [PATCH 1/2] ARM: Make OMAP syslib.c functions available for other ARM targets   Sascha Hauer
• Barebox Enviroment FileSystem   Sascha Hauer
• [RFC 2/4] of: add MIPS memory bank adding support   Sascha Hauer
• [PATCH] MCI/MXS: fix signed/unsigned mismatch   Sascha Hauer
• MXS: fix SoC detecting   Sascha Hauer
• [PATCH] ARM: PCM970: Add definition for SPI CS1   Sascha Hauer
• Installing barebox for karo-tx53 in nand-flash   Sascha Hauer
• [PATCH v3 2/7] scripts: add kwboot tool   Sascha Hauer
• [PATCH v2 1/2] tegra20: add pinctrl driver   Sascha Hauer
• [PATCH v3 0/7] Basic support for Armada 370/XP SOCs   Sascha Hauer
• [PATCH] arm: properly init alignment trap bit   Sascha Hauer
• [PATCH] Added sd driver for bcm2835 (Raspberry PI)   Sascha Hauer
• [PATCH v3 0/7] Basic support for Armada 370/XP SOCs   Sascha Hauer
• [PATCH v3 0/7] Basic support for Armada 370/XP SOCs   Sascha Hauer
• [PATCH] ARM: remove unused clkdev.h   Sascha Hauer
• [PATCH] gpio: fix typos   Sascha Hauer
• [PATCH] tegra20: add Colibri T20 on Iris   Sascha Hauer
• [PATCH 1/2] ARM: OMAP MCI: Move TWL6030 power initialization into OMAP directory   Sascha Hauer
• [PATCH] ARM: pcm038: Add support for USB OTG device   Sascha Hauer
• Error when starting kernel with devicetree on tx53   Sascha Hauer
• [PATCH] ppc: boards: add barebox.lds to .gitignore   Sascha Hauer
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sascha Hauer
• [PATCH] arm: mach-mvebu: drop useless clkdev.h   Sascha Hauer
• [PATCH] arm: ensure the build doesn't fail when kwbimage lacks the binary blob   Sascha Hauer
• [PATCH] gitignore: add kwb binary images to gitignore file   Sascha Hauer
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sascha Hauer
• [PATCH] arm: mach-mvebu: drop useless clkdev.h   Sascha Hauer
• Error when starting kernel with devicetree on tx53   Sascha Hauer
• [PATCH] fdt: Fix dt memreserve entry   Sascha Hauer
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sascha Hauer
• [PATCH v2 0/4] MIPS: add initial device tree support   Sascha Hauer
• [PATCH 1/2] net: dhcp: Fix return value on ctrl-c   Sascha Hauer
• [PATCH 2/2] net: dhcp: Fix tftp servername handling   Sascha Hauer
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sascha Hauer
• [PATCH 1/3] ARM v7: fix mmu-off operation   Sascha Hauer
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sascha Hauer
• [PATCH] ARM i.MX6: set imx6 silicon revision   Sascha Hauer
• [PATCH 1/1] Revert "nand_base: detect more ONFI flash"   Sascha Hauer
• [PATCH] ARM: ccmx51: Another fix SDRAM size detection   Sascha Hauer
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sascha Hauer
• [PATCHv2 00/10] kwbimage improvements, Kirkwood support   Sascha Hauer
• [PATCH v2] nand_base: sync flash detection functions with linux 3.9's code   Sascha Hauer
• [PATCH v2] GPIO: Add gpio_to_desc helper   Sascha Hauer
• [PATCH 1/3] ARM v7: fix mmu-off operation   Sascha Hauer
• [PATCH 3/3] ARM v7: added v7_mmu_cache_invalidate()   Sascha Hauer
• [PATCH] ARM: invalidate data caches during early init   Sascha Hauer
• [PATCH] ARM: invalidate data caches during early init   Sascha Hauer
• [PATCH] of: add ranges address translation for default bus   Sascha Hauer
• [PATCH] of: add ranges address translation for default bus   Sascha Hauer
• [PATCH] at91: add Calao QIL-A9G20   Sascha Hauer
• [PATCH] devicetree misc updates   Sascha Hauer
• [PATCH 1/8] ARM: dtb: Add $(obj)/$(BUILTIN_DTB).dtb.S as secondary target   Sascha Hauer
• [PATCH 2/8] ARM: build dtbs during build process using extra-y   Sascha Hauer
• [PATCH 3/8] scripts: fixdep: update from v3.10-rc1   Sascha Hauer
• [PATCH 4/8] kbuild: always run gcc -E on *.dts, remove cmd_dtc_cpp   Sascha Hauer
• [PATCH 5/8] of: When checking for existing devices also check resource end   Sascha Hauer
• [PATCH 6/8] of: Call of_add_memory from of_probe   Sascha Hauer
• [PATCH 7/8] of: Add of_match_node function   Sascha Hauer
• [PATCH 8/8] of: populate devices based on "simple-bus" property   Sascha Hauer
• No subject   Sascha Hauer
• [PATCH 1/5] i2c: Add missing result check   Sascha Hauer
• [PATCH 2/5] i2c: remove dead code   Sascha Hauer
• [PATCH 3/5] i2c: Add support for dynamic i2c bus numbers   Sascha Hauer
• [PATCH 4/5] i2c: Add devicetree support   Sascha Hauer
• [PATCH 5/5] i2c: fsl: Add devicetree probe support   Sascha Hauer
• [PATCH 05/11] arm: mvebu: convert Armada 370/XP to common init   Sascha Hauer
• [PATCH 05/11] arm: mvebu: convert Armada 370/XP to common init   Sascha Hauer
• [PATCH v2] nand_base: sync flash detection functions with linux 3.9's code   Sascha Hauer
• [PATCH 05/11] arm: mvebu: convert Armada 370/XP to common init   Sascha Hauer
• [SPAM] [PATCH 3/5] i2c: Add support for dynamic i2c bus numbers   Sascha Hauer
• [RFC] MXS/i.MX23: detecting the boot source   Sascha Hauer
• Unable to Boot from NAND on Mini2440   Sascha Hauer
• [PATCH] misc oftree patches   Sascha Hauer
• [PATCH 1/5] pinctrl: imx-iomux-v3: only register pinctrl when device node is available   Sascha Hauer
• [PATCH 2/5] spi: improve devicetree support   Sascha Hauer
• [PATCH 3/5] mtd: dataflash: Add devicetree probing support   Sascha Hauer
• [PATCH 4/5] net: Add of_register_ethaddr   Sascha Hauer
• [PATCH 5/5] net: fec: Add imx25 compatible property   Sascha Hauer
• [PATCH] move the first i.MX board over to devicetree   Sascha Hauer
• [PATCH 01/10] ARM: i.MX: remove unused .mac_addr_base in iim   Sascha Hauer
• [PATCH 02/10] ARM: i.MX: iim: Add devicetree probe support   Sascha Hauer
• [PATCH 03/10] ARM: i.MX51: Add devicetree files   Sascha Hauer
• [PATCH 04/10] ARM: i.MX51: Add IIM devicetree node   Sascha Hauer
• [PATCH 05/10] ARM: i.MX51: Fixup fec pads in dts   Sascha Hauer
• [PATCH 06/10] ARM: i.MX51: skip devices register when devicetree is present   Sascha Hauer
• [PATCH 07/10] ARM: i.MX51 babbage: Add spi-cs-high property to pmic   Sascha Hauer
• [PATCH 08/10] ARM: i.MX51 babbage: provide MAC adress in devicetree   Sascha Hauer
• [PATCH 09/10] ARM: i.MX51 babbage: Add phy reset gpio to dts   Sascha Hauer
• [PATCH 10/10] ARM: i.MX51 babbage: switch to devicetree   Sascha Hauer
• [PATCH 04/11] arm: mvebu: convert Dove to common init   Sascha Hauer
• [PATCH v2] nand_base: sync flash detection functions with linux 3.9's code   Sascha Hauer
• [PATCH 04/11] arm: mvebu: convert Dove to common init   Sascha Hauer
• [PATCH 08/10] ARM: i.MX51 babbage: provide MAC adress in devicetree   Sascha Hauer
• [PATCH] mci i.MX esdhc: Fix clock divider calculation   Sascha Hauer
• [PATCH urgent] ARM: fix the memset fix   Sascha Hauer
• [PATCH urgent] ARM: fix the memset fix   Sascha Hauer
• [PATCH v2] mci i.MX esdhc: Fix clock divider calculation   Sascha Hauer
• [PATCH] MXS/i.MX23: add boot source detection   Sascha Hauer
• [PATCH] defaultenv-2: Fix settings entry   Sascha Hauer
• stable releases   Sascha Hauer
• [PATCH 1/2 v2] cfi_flash: add shift option for some cfi memory chips   Sascha Hauer
• [PATCH 2/2] cfi_flash: size_ratio should not be 0   Sascha Hauer
• 2013.05 breaking Linux boot on imx28 CFA-10036   Sascha Hauer
• imx31 bcb   Sascha Hauer
• [PATCH] mtd-core: fix mtd erase operation for non-uniform flashes.   Sascha Hauer
• [RFC, PATCH v2 1/3] MIPS: add Atheros ar531x family support   Sascha Hauer
• [PATCH 1/2] arm: am33xx: add pinmux and clock config for UART2   Sascha Hauer
• [PATCH] MCI: support boot partitions   Sascha Hauer
• [PATCH 1/3] param: Add info function   Sascha Hauer
• [PATCH 2/3] param: Add helpers to provide an enum parameter   Sascha Hauer
• [PATCH 3/3] mci: Add support for MMC boot partitions   Sascha Hauer
• [PATCH] net: fec_imx: default phy address to -1 for dt probe   Sascha Hauer
• [PATCH] imx-image support   Sascha Hauer
• [PATCH 1/3] ARM: Makefile: Make sure to clean boarddirs   Sascha Hauer
• [PATCH 2/3] scripts: Add imx-usb-loader tool   Sascha Hauer
• [PATCH 3/3] ARM: i.MX51 babbage: switch to imx-image   Sascha Hauer
• [PATCH] ARM: cfa10036: Add more board ID for boot time detection   Sascha Hauer
• [RFC, PATCH v2 2/3] net: add ar231x-eth support   Sascha Hauer
• [PATCH] Make dependency fixes   Sascha Hauer
• [PATCH 1/4] pbl: Fix typo in make causing pbl files to be rebuilt   Sascha Hauer
• [PATCH 2/4] ARM: pbl: fix make dependencies   Sascha Hauer
• [PATCH 3/4] make: Add barebox_default_env.* to targets   Sascha Hauer
• [PATCH 4/4] ARM: zynq: Add cmd to generate zynq image   Sascha Hauer
• [PATCH] ARM: i.MX51: PLL errata workaround   Sascha Hauer
• [PATCH] ARM i.MX53: tqma53: fix console entry   Sascha Hauer
• [PATCH 2/2] cfi_flash: size_ratio should not be 0   Sascha Hauer
• [PATCH] mtd: call mtd_erase with complete area if possible   Sascha Hauer
• [PATCH] MCI patches   Sascha Hauer
• [PATCH 1/7] driver: Attach info callback to device, not to driver   Sascha Hauer
• [PATCH 2/7] mci: make mci device a pure device   Sascha Hauer
• [PATCH 3/7] mci: embed mci device into struct mci   Sascha Hauer
• [PATCH 4/7] mci: set name of mci device to same name as the filename   Sascha Hauer
• [PATCH 5/7] of: Add of_alias_get function   Sascha Hauer
• [PATCH 6/7] mci: imx-esdhc: allow to specify devicename via OF alias   Sascha Hauer
• [PATCH 7/7] ARM: i.MX51: Add aliases for MMC controllers   Sascha Hauer
• [PATCH 1/3] cfi: remove unused field from struct flash_info   Sascha Hauer
• [PATCH 2/3] cfi: Add dev * to flash_info and switch to dev_*   Sascha Hauer
• [PATCH 3/3] cfi: make hardware device parent of mtd device   Sascha Hauer
• MIPS: XBurst: rzx50: enable pbl support   Sascha Hauer
• [RFC, EXPERIMENTAL] MIPS: add initial cache support   Sascha Hauer
• v2013.05.1 stable release   Sascha Hauer
• [RFC, PATCH v2 2/3] net: add ar231x-eth support   Sascha Hauer
• [PATCH] ARM: i.MX53 vincell: Fix lowlevel startup   Sascha Hauer
• [PATCH] ARM: pbl: Always call pbl make   Sascha Hauer
• [PATCH] pcm049: add 1GB RAM support   Sascha Hauer
• [PATCH] pcm049: clean up   Sascha Hauer
• [PATCH] twl6030: Set WR_S for VMMC   Sascha Hauer
• [PATCH] omap4: set voltage according to mpu freq   Sascha Hauer
• [PATCH] scripts: Makefile: do not use obj-* variables for userspace tools   Sascha Hauer
• [PATCH] treewide include/: Add missing includes   Sascha Hauer
• [PATCH] OF updates   Sascha Hauer
• [PATCH 1/4] of: Also print disabled nodes   Sascha Hauer
• [PATCH 2/4] of: remove unused define   Sascha Hauer
• [PATCH 3/4] bootm: make sure to print fixed oftree   Sascha Hauer
• [PATCH 4/4] bootm: print Kernel commandline in verbose mode   Sascha Hauer
• [PATCH] Add devicetree support to i.MX chipidea driver   Sascha Hauer
• [PATCH 1/3] usb: Add devicetree helpers   Sascha Hauer
• [PATCH 2/3] usb: i.MX chipidea: Add devicetree support   Sascha Hauer
• [PATCH 3/3] usb: i.MX chipidea: Add overcurrent disable flag for i.MX6   Sascha Hauer
• [PATCH] i.MX6: Add devicetree support   Sascha Hauer
• [PATCH 1/8] mtd: m25p80: add devicetree support   Sascha Hauer
• [PATCH 2/8] ARM: i.MX6: Fix CCM compatible node   Sascha Hauer
• [PATCH 3/8] ARM: i.MX6: skip devices register when devicetree is present   Sascha Hauer
• [PATCH 4/8] ARM: i.MX6: Add devicetree files   Sascha Hauer
• [PATCH 5/8] ARM: i.MX6: add imx31 compatible entry for GPT   Sascha Hauer
• [PATCH 6/8] ARM: i.MX6: Add usdhc aliases   Sascha Hauer
• [PATCH 7/8] ARM: i.MX6 sabrelite: switch to devicetree probing   Sascha Hauer
• [PATCH 8/8] ARM: i.MX6 sabresd: Switch to devicetree probing   Sascha Hauer
• [PATCH] 'detect' command to detect devices   Sascha Hauer
• [PATCH 1/3] devices: add detect mechanism   Sascha Hauer
• [PATCH 2/3] mci: implement detect driver callback   Sascha Hauer
• [PATCH 3/3] mci fsl-esdhc: implement detect driver callback   Sascha Hauer
• [PATCH] MIPS: asm/mipsregs.h: remove unused stuff   Sascha Hauer
• [PATCH 1/2] ppc io.h: fix indentation   Sascha Hauer
• [PATCH] ARM: Using unsigned specifiers for unsigned arguments for printf   Sascha Hauer
• [PATCH 1/6] mci: print current clock in info   Sascha Hauer
• [PATCH 2/6] mci: do not limit clock to card capabilities   Sascha Hauer
• [PATCH 3/6] mci: rename trans_speed field to csd_max_dtr   Sascha Hauer
• [PATCH 4/6] mci: Use csd_max_dtr when appropriate   Sascha Hauer
• [PATCH 5/6] mci: Add devicetree helper function   Sascha Hauer
• [PATCH 6/6] mci: i.MX esdhc: get additional parameters from devicetree   Sascha Hauer
• [PATCH 1/4] block: remove unused read_start and read_done ops   Sascha Hauer
• [PATCH 2/4] block: rename file operation functions   Sascha Hauer
• [PATCH 3/4] block: implement block_read/block_write functions   Sascha Hauer
• [PATCH 4/4] partition: DOS: Add parameter for the NT disk Signature   Sascha Hauer
• [PATCH] bootm: Print internal devicetree information without verbose   Sascha Hauer
• [PATCH v3 0/3] work on atheros ar2313   Sascha Hauer
• [PATCH] at91: add Calao QIL-A9G20   Gregory Hermant
• [PATCH] gitignore: add kwb binary images to gitignore file   Sebastian Hesselbarth
• [PATCH 0/5] Initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH 1/5] scripts: kwbimage: add references to Marvell Dove SoC   Sebastian Hesselbarth
• [PATCH 2/5] scripts: kwboot: add support for Marvell Dove   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH 4/5] arm: add basic support for SolidRun CuBox   Sebastian Hesselbarth
• [PATCH 5/5] arm: mach-mvebu: rename Armada 370/XP core code   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH 5/5] arm: mach-mvebu: rename Armada 370/XP core code   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH v2 4/5] arm: add basic support for SolidRun CuBox   Sebastian Hesselbarth
• [PATCH v2 5/5] arm: mach-mvebu: rename Armada 370/XP core code   Sebastian Hesselbarth
• [PATCH] of: add ranges address translation for default bus   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Sebastian Hesselbarth
• [PATCHv2 00/10] kwbimage improvements, Kirkwood support   Sebastian Hesselbarth
• [PATCH] of: add ranges address translation for default bus   Sebastian Hesselbarth
• [PATCH] of: add ranges address translation for default bus   Sebastian Hesselbarth
• [PATCH 00/11] arm: mvebu: SoC consolidation   Sebastian Hesselbarth
• [PATCH 01/11] arm: mvebu: add more visible SoC separators to Kconfig   Sebastian Hesselbarth
• [PATCH 02/11] arm: mvebu: introduce common lowlevel and early init   Sebastian Hesselbarth
• [PATCH 03/11] arm: mvebu: introduce common console UART config   Sebastian Hesselbarth
• [PATCH 04/11] arm: mvebu: convert Dove to common init   Sebastian Hesselbarth
• [PATCH 05/11] arm: mvebu: convert Armada 370/XP to common init   Sebastian Hesselbarth
• [PATCH 06/11] arm: mvebu: convert Kirkwood to common init   Sebastian Hesselbarth
• [PATCH 07/11] arm: mvebu: convert SolidRun CuBox to common init   Sebastian Hesselbarth
• [PATCH 08/11] arm: mvebu: convert Globalscale Mirabox to common init   Sebastian Hesselbarth
• [PATCH 09/11] arm: mvebu: convert PlatHome OpenBlocks AX3 to common init   Sebastian Hesselbarth
• [PATCH 10/11] arm: mvebu: convert Marvell Armada XP GP board to common init   Sebastian Hesselbarth
• [PATCH 11/11] arm: mvebu: convert Globalscale Guruplug to common init   Sebastian Hesselbarth
• [PATCH 05/11] arm: mvebu: convert Armada 370/XP to common init   Sebastian Hesselbarth
• [PATCH 05/11] arm: mvebu: convert Armada 370/XP to common init   Sebastian Hesselbarth
• [PATCH 05/11] arm: mvebu: convert Armada 370/XP to common init   Sebastian Hesselbarth
• [PATCH 04/11] arm: mvebu: convert Dove to common init   Sebastian Hesselbarth
• [PATCH RFC 0/2] Fix uInitrd handling   Uwe Kleine-König
• [PATCH RFC 1/2] bootm: Simplify initrd address handling   Uwe Kleine-König
• [PATCH RFC 2/2] Don't honor initrd load address   Uwe Kleine-König
• [PATCH] scripts: genenv: remove empty files from tempdir   Uwe Kleine-König
• Installing barebox for karo-tx53   Dr. Patrick Langfeld
• Installing barebox for karo-tx53 in nand-flash   Dr. Patrick Langfeld
• Error when starting kernel with devicetree on tx53   Dr. Patrick Langfeld
• Error when starting kernel with devicetree on tx53   Dr. Patrick Langfeld
• [PATCH 1/2] beaglebone: remove stray semicolon   Jan Luebbe
• [PATCH 2/2] console: fix console without CONFIG_PARAMETER   Jan Luebbe
• [PATCH 1/2] arm: am33xx: add pinmux and clock config for UART2   Jan Luebbe
• [PATCH 2/2] arm: am33xx: add pinmux config for RMII2   Jan Luebbe
• [PATCH] scripts: genenv: remove empty files from tempdir   Jan Luebbe
• [PATCH] scripts: Makefile: do not use obj-* variables for userspace tools   Jan Luebbe
• 2013.05 breaking Linux boot on imx28 CFA-10036   Jan Lübbe
• [SPAM] [PATCH] scripts: genenv: remove empty files from tempdir   Jan Lübbe
• bootm command support for x86   Masaki Muranaka
• [patch][x86] Avoid build error on "config SPI" is y   Masaki Muranaka
• Unable to Boot from NAND on Mini2440   Vikram Narayanan
• Unable to Boot from NAND on Mini2440   Vikram Narayanan
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] arm: initial support for Marvell Armada 370/XP SoCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] tegra20: add pinctrl driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] tegra20: add pinctrl driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: i.MX: ccxmx51: detect SDRAM size by board id   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: i.MX: ccxmx51: detect SDRAM size by board id   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] commands/mem.c: drop non used DEVMEM   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] qt1070: drop non used buf   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] Revert "nand_base: detect more ONFI flash"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] Revert "nand_base: detect more ONFI flash"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] Revert "nand_base: detect more ONFI flash"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] nand_base: fix to test for JCPV problem   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] nand_base: fix to test for JCPV problem   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] nand_base: sync flash detection functions with linux 3.9's code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] nand_base: sync flash detection functions with linux 3.9's code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] login: disable input console if password wrong   Jean-Christophe PLAGNIOL-VILLARD
• Installing barebox for karo-tx53 in nand-flash   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] GPIO: Check for "gpio_is_valid" first   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] GPIO: Check for "gpio_is_valid" first   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] GPIO: Add gpio_to_desc helper   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] GPIO: Add gpio_to_desc helper   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] GPIO: Add gpio_to_desc helper   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] GPIO: Add gpio_to_desc helper   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/2] tegra20: add pinctrl driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] gpio: fix typos   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] ARM: at91: dt: use #include for all device trees   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] ARM: at91: dt: switch to standard GPIO flag defines.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] ARM: at91: dt: add pinctrl pre-processor define   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] ARM: at91: dt: switch to standard IRQ flag defines   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] ARM: at91: dt: use #include for all device trees   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] nand_base: sync flash detection functions with linux 3.9's code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] nand_base: sync flash detection functions with linux 3.9's code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91: add Calao QIL-A9G20   Jean-Christophe PLAGNIOL-VILLARD
• [SPAM] [PATCH 3/5] i2c: Add support for dynamic i2c bus numbers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] nand_base: sync flash detection functions with linux 3.9's code   Jean-Christophe PLAGNIOL-VILLARD
• [RFC, PATCH v2 2/3] net: add ar231x-eth support   Jean-Christophe PLAGNIOL-VILLARD
• [SPAM] [PATCH] scripts: genenv: remove empty files from tempdir   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] clkdev: fix typo   Antony Pavlov
• MIPS: xburst: use common serial code   Antony Pavlov
• [PATCH 1/2] MIPS: xburst: use common serial code   Antony Pavlov
• [PATCH 2/2] MIPS: rzx50: switch to common mach-xburst serial code   Antony Pavlov
• [RFC 0/4] MIPS: add initial device tree support   Antony Pavlov
• [RFC 1/4] MIPS: add initial device tree support   Antony Pavlov
• [RFC 2/4] of: add MIPS memory bank adding support   Antony Pavlov
• [RFC 3/4] MIPS: qemu-malta: add device tree support   Antony Pavlov
• [RFC 4/4] MIPS: qemu-malta_defconfig: enable OF support   Antony Pavlov
• [PATCH] ARM: remove unused clkdev.h   Antony Pavlov
• [PATCH] gpio: fix typos   Antony Pavlov
• [PATCH] ppc: boards: add barebox.lds to .gitignore   Antony Pavlov
• [PATCH v2 0/4] MIPS: add initial device tree support   Antony Pavlov
• [PATCH v2 1/4] of: separate out "generic" memory bank adding   Antony Pavlov
• [PATCH v2 2/4] MIPS: add initial device tree support   Antony Pavlov
• [PATCH v2 3/4] MIPS: qemu-malta: add device tree support   Antony Pavlov
• [PATCH v2 4/4] MIPS: qemu-malta_defconfig: enable OF support   Antony Pavlov
• [RFC, EXPERIMENTAL] MIPS: add initial cache support   Antony Pavlov
• MIPS: XBurst: rzx50: enable pbl support   Antony Pavlov
• [PATCH 1/3] MIPS: rzx50: add trivial board_pbl_start   Antony Pavlov
• [PATCH 2/3] MIPS: XBurst: enable pbl support   Antony Pavlov
• [PATCH 3/3] MIPS: rzx50: enable pbl in defconfig   Antony Pavlov
• [PATCH] MIPS: asm/mipsregs.h: remove unused stuff   Antony Pavlov
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Thomas Petazzoni
• [PATCH 1/7] scripts: allow lines longer than 80 cols with printf() in checkpatch   Thomas Petazzoni
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Thomas Petazzoni
• [PATCH 3/7] scripts: add kwboot tool   Thomas Petazzoni
• [PATCH 4/7] arm: initial support for Marvell Armada 370/XP SoCs   Thomas Petazzoni
• [PATCH 5/7] arm: add basic support for Armada XP OpenBlocks AX3 platform   Thomas Petazzoni
• [PATCH 6/7] arm: add basic support for the Armada 370 Mirabox platform   Thomas Petazzoni
• [PATCH 7/7] arm: add basic support for the Armada XP GP platform   Thomas Petazzoni
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Thomas Petazzoni
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Thomas Petazzoni
• [PATCH 1/7] scripts: allow lines longer than 80 cols with printf() in checkpatch   Thomas Petazzoni
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Thomas Petazzoni
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Thomas Petazzoni
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Thomas Petazzoni
• [PATCH 4/7] arm: initial support for Marvell Armada 370/XP SoCs   Thomas Petazzoni
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Thomas Petazzoni
• [PATCH 4/7] arm: initial support for Marvell Armada 370/XP SoCs   Thomas Petazzoni
• [PATCH 4/7] arm: initial support for Marvell Armada 370/XP SoCs   Thomas Petazzoni
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Thomas Petazzoni
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Thomas Petazzoni
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Thomas Petazzoni
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Thomas Petazzoni
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Thomas Petazzoni
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Thomas Petazzoni
• [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Thomas Petazzoni
• [PATCH v2 0/7] Basic support for Armada 370/XP SOCs   Thomas Petazzoni
• [PATCH v2 1/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Thomas Petazzoni
• [PATCH v2 2/7] scripts: add kwboot tool   Thomas Petazzoni
• [PATCH v2 3/7] arm: initial support for Marvell Armada 370/XP SoCs   Thomas Petazzoni
• [PATCH v2 4/7] arm: integrate kwbimage in the image generation   Thomas Petazzoni
• [PATCH v2 5/7] arm: add basic support for Armada XP OpenBlocks AX3 platform   Thomas Petazzoni
• [PATCH v2 6/7] arm: add basic support for the Armada 370 Mirabox platform   Thomas Petazzoni
• [PATCH v2 7/7] arm: add basic support for the Armada XP GP platform   Thomas Petazzoni
• [PATCH v2 0/7] Basic support for Armada 370/XP SOCs   Thomas Petazzoni
• [PATCH v3 0/7] Basic support for Armada 370/XP SOCs   Thomas Petazzoni
• [PATCH v3 1/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Thomas Petazzoni
• [PATCH v3 2/7] scripts: add kwboot tool   Thomas Petazzoni
• [PATCH v3 3/7] arm: initial support for Marvell Armada 370/XP SoCs   Thomas Petazzoni
• [PATCH v3 4/7] arm: integrate kwbimage in the image generation   Thomas Petazzoni
• [PATCH v3 5/7] arm: add basic support for Armada XP OpenBlocks AX3 platform   Thomas Petazzoni
• [PATCH v3 6/7] arm: add basic support for the Armada 370 Mirabox platform   Thomas Petazzoni
• [PATCH v3 7/7] arm: add basic support for the Armada XP GP platform   Thomas Petazzoni
• [PATCH 1/1] login: disable input console if password wrong   Thomas Petazzoni
• [PATCH v3 0/7] Basic support for Armada 370/XP SOCs   Thomas Petazzoni
• [PATCH v3 0/7] Basic support for Armada 370/XP SOCs   Thomas Petazzoni
• [PATCH v3 0/7] Basic support for Armada 370/XP SOCs   Thomas Petazzoni
• [PATCH] arm: mach-mvebu: drop useless clkdev.h   Thomas Petazzoni
• [PATCH] arm: ensure the build doesn't fail when kwbimage lacks the binary blob   Thomas Petazzoni
• [PATCH] arm: ensure the build doesn't fail when kwbimage lacks the binary blob   Thomas Petazzoni
• [PATCH 2/5] scripts: kwboot: add support for Marvell Dove   Thomas Petazzoni
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Thomas Petazzoni
• [PATCH 5/5] arm: mach-mvebu: rename Armada 370/XP core code   Thomas Petazzoni
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Thomas Petazzoni
• [PATCH] arm: mach-mvebu: drop useless clkdev.h   Thomas Petazzoni
• [PATCH] arm: mach-mvebu: drop useless clkdev.h   Thomas Petazzoni
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Thomas Petazzoni
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Thomas Petazzoni
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Thomas Petazzoni
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Thomas Petazzoni
• [PATCH 00/12] Support for Marvell Kirkwood and Dove SoCs   Thomas Petazzoni
• [PATCH 01/12] scripts/kwbimage: add a new function image_count_options()   Thomas Petazzoni
• [PATCH 02/12] scripts/kwbimage: add a few sanity checks   Thomas Petazzoni
• [PATCH 03/12] scripts/kwbimage: make the v0 image creation more flexible   Thomas Petazzoni
• [PATCH 04/12] scripts/kwbimage: simplify the v1 image creation   Thomas Petazzoni
• [PATCH 05/12] scripts/kwbimage: make image_boot_mode_id() return -1 on failure   Thomas Petazzoni
• [PATCH 06/12] scripts/kwbimage: add support for NAND ECC and page size header fields   Thomas Petazzoni
• [PATCH 07/12] arm: mach-mvebu: rename Armada 370/XP core code   Thomas Petazzoni
• [PATCH 08/12] arm: mvebu: initial support for Marvell Dove SoCs   Thomas Petazzoni
• [PATCH 09/12] arm: mvebu: add Feroceon CPU type   Thomas Petazzoni
• [PATCH 10/12] arm: mvebu: initial support for Marvell Kirkwood SoCs   Thomas Petazzoni
• [PATCH 11/12] arm: mvebu: add basic support for SolidRun CuBox   Thomas Petazzoni
• [PATCH 12/12] arm: mvebu: add basic support for Globalscale Guruplug board   Thomas Petazzoni
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Thomas Petazzoni
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Thomas Petazzoni
• [PATCHv2 00/10] kwbimage improvements, Kirkwood support   Thomas Petazzoni
• [PATCHv2 01/10] scripts/kwbimage: add a new function image_count_options()   Thomas Petazzoni
• [PATCHv2 02/10] scripts/kwbimage: add a few sanity checks   Thomas Petazzoni
• [PATCHv2 03/10] scripts/kwbimage: make the v0 image creation more flexible   Thomas Petazzoni
• [PATCHv2 04/10] scripts/kwbimage: simplify the v1 image creation   Thomas Petazzoni
• [PATCHv2 05/10] scripts/kwbimage: make image_boot_mode_id() return -1 on failure   Thomas Petazzoni
• [PATCHv2 06/10] scripts/kwbimage: add support for NAND ECC and page size header fields   Thomas Petazzoni
• [PATCHv2 07/10] arm: mvebu: add Feroceon CPU type   Thomas Petazzoni
• [PATCHv2 08/10] arm: mvebu: initial support for Marvell Kirkwood SoCs   Thomas Petazzoni
• [PATCHv2 09/10] arm: mvebu: add basic support for Globalscale Guruplug board   Thomas Petazzoni
• [PATCHv2 10/10] arm: mvebu: remove useless lines in kwbimage.cfg for CuBox   Thomas Petazzoni
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Thomas Petazzoni
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Thomas Petazzoni
• [PATCH] of: add ranges address translation for default bus   Thomas Petazzoni
• [PATCH 00/11] arm: mvebu: SoC consolidation   Thomas Petazzoni
• [PATCH 00/11] arm: mvebu: SoC consolidation   Thomas Petazzoni
• [PATCH 0/2] ARM i.MX31: define fix, IOMUX GPR setup fix for pcm037   Andreas Pretzsch
• [PATCH 1/2] ARM i.MX31: cleanup MX31_ prefix: fix leftover IOMUXC_BASE defines   Andreas Pretzsch
• [PATCH 2/2] ARM i.MX31 pcm037: fix erroneous IOMUX GPR setup in pcm037_usb_init()   Andreas Pretzsch
• [RFC, PATCH v2 0/3] work on atheros ar2313   Oleksij Rempel
• [RFC, PATCH v2 1/3] MIPS: add Atheros ar531x family support   Oleksij Rempel
• [RFC, PATCH v2 2/3] net: add ar231x-eth support   Oleksij Rempel
• [RFC, PATCH v2 3/3] MIPS: ar231x: add netgear-wg102   Oleksij Rempel
• [PATCH 0/2] cfi fixes   Oleksij Rempel
• [PATCH 1/2 v2] cfi_flash: add shift option for some cfi memory chips   Oleksij Rempel
• [PATCH 2/2] cfi_flash: size_ratio should not be 0   Oleksij Rempel
• [PATCH 2/2] cfi_flash: size_ratio should not be 0   Oleksij Rempel
• [RFC, PATCH v2 1/3] MIPS: add Atheros ar531x family support   Oleksij Rempel
• [RFC, PATCH v2 2/3] net: add ar231x-eth support   Oleksij Rempel
• [PATCH v3 0/3] work on atheros ar2313   Oleksij Rempel
• [PATCH v3 1/3] MIPS: add Atheros ar531x family support   Oleksij Rempel
• [PATCH v3 2/3] net: add ar231x-eth support   Oleksij Rempel
• [PATCH v3 3/3] MIPS: ar231x: add netgear-wg102   Oleksij Rempel
• 2013.05 breaking Linux boot on imx28 CFA-10036   Maxime Ripard
• 2013.05 breaking Linux boot on imx28 CFA-10036   Maxime Ripard
• 2013.05 breaking Linux boot on imx28 CFA-10036   Maxime Ripard
• [PATCH] ARM: cfa10036: Add more board ID for boot time detection   Maxime Ripard
• AT91 bypass BMS pin = 0 change low level boot loader   Steven Romme
• [PATCH 1/3] ARM v7: fix mmu-off operation   Enrico Scholz
• [PATCH 2/3] ARM v7: v7_mmu_cache_flush(): do not restore r0-r3 (minor optimization)   Enrico Scholz
• [PATCH 3/3] ARM v7: added v7_mmu_cache_invalidate()   Enrico Scholz
• [PATCH 1/3] ARM v7: fix mmu-off operation   Enrico Scholz
• [PATCH 1/3] ARM: pcm038: Add descriptions for pin-groups   Alexander Shiyan
• [PATCH 2/3] ARM: pcm038: Add definition for SPI chipselect 0   Alexander Shiyan
• [PATCH 3/3] ARM: pcm038: Add definition for FEC reset   Alexander Shiyan
• Re[2]: [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Alexander Shiyan
• Re[2]: [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC   Alexander Shiyan
• [PATCH] ARM: ccmx51js: Add support for USB Host1   Alexander Shiyan
• Re: OTG Device mode on i.MX51   Alexander Shiyan
• Re[2]: OTG Device mode on i.MX51   Alexander Shiyan
• [PATCH] ARM: pcm038: Add support for USB OTG device   Alexander Shiyan
• Re[2]: OTG Device mode on i.MX51   Alexander Shiyan
• Re: [PATCH 2/2] ARM: i.MX: ccxmx51: detect SDRAM size by board id   Alexander Shiyan
• Re[2]: [PATCH 2/2] ARM: i.MX: ccxmx51: detect SDRAM size by board id   Alexander Shiyan
• [PATCH] ARM: PCM970: Add definition for SPI CS1   Alexander Shiyan
• Re[2]: [PATCH 1/2] ARM: Make OMAP syslib.c functions available for other ARM targets   Alexander Shiyan
• [PATCH 1/2] ARM: OMAP MCI: Move TWL6030 power initialization into OMAP directory   Alexander Shiyan
• [PATCH 2/2] MCI: Sort Makefile entries   Alexander Shiyan
• [PATCH 1/2] GPIO: Check for "gpio_is_valid" first   Alexander Shiyan
• [PATCH 2/2] GPIO: Remove unneeded "gpio_is_valid" calls   Alexander Shiyan
• Re[2]: [PATCH 1/2] GPIO: Check for "gpio_is_valid" first   Alexander Shiyan
• [PATCH] GPIO: Add gpio_to_desc helper   Alexander Shiyan
• Re[2]: [PATCH] GPIO: Add gpio_to_desc helper   Alexander Shiyan
• Re[2]: [PATCH] GPIO: Add gpio_to_desc helper   Alexander Shiyan
• Re[2]: [PATCH] GPIO: Add gpio_to_desc helper   Alexander Shiyan
• Re[2]: [PATCH 1/1] Revert "nand_base: detect more ONFI flash"   Alexander Shiyan
• Re[2]: [PATCH 1/1] Revert "nand_base: detect more ONFI flash"   Alexander Shiyan
• [PATCH] ARM: ccmx51: Another fix SDRAM size detection   Alexander Shiyan
• Re[3]: [PATCH 1/1] Revert "nand_base: detect more ONFI flash"   Alexander Shiyan
• [PATCH v2] GPIO: Add gpio_to_desc helper   Alexander Shiyan
• Re: [PATCH 08/10] ARM: i.MX51 babbage: provide MAC adress in devicetree   Alexander Shiyan
• [PATCH] ARM: Using unsigned specifiers for unsigned arguments for printf   Alexander Shiyan
• [PATCH] arm: ensure the build doesn't fail when kwbimage lacks the binary blob   Baruch Siach
• [PATCH 1/2] tegra20: add pinctrl driver   Lucas Stach
• [PATCH 2/2] tegra: paz00: import pinconfig from Linux   Lucas Stach
• [PATCH v2 1/2] tegra20: add pinctrl driver   Lucas Stach
• [PATCH v2 2/2] tegra: paz00: import pinconfig from Linux   Lucas Stach
• [PATCH] arm: properly init alignment trap bit   Lucas Stach
• [PATCH] tegra20: add generic board   Lucas Stach
• [PATCH] tegra20: add Colibri T20 on Iris   Lucas Stach
• [PATCH] tegra20: add Colibri T20 on Iris   Lucas Stach
• [PATCH 3/5] arm: initial support for Marvell Dove SoCs   Lucas Stach
• [PATCH] ARM: invalidate data caches during early init   Lucas Stach
• [PATCH] ARM: invalidate data caches during early init   Lucas Stach
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Willy Tarreau
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Willy Tarreau
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Willy Tarreau
• [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images   Willy Tarreau
• [PATCH] mci i.MX esdhc: Fix clock divider calculation   Steffen Trumtrar
• [PATCH] mci i.MX esdhc: Fix clock divider calculation   Steffen Trumtrar
• [PATCH v2] mci i.MX esdhc: Fix clock divider calculation   Steffen Trumtrar
• [PATCH] defaultenv-2: Fix settings entry   Steffen Trumtrar
• [PATCH] ARM i.MX53: tqma53: fix console entry   Steffen Trumtrar
• [PATCH] omap4-fb: use uncached screen_base   Jan Weitzel
• [PATCH] omap4: set voltage according to mpu freq   Jan Weitzel
• [PATCH] OMAP4: Use default clock source for mcbsp   Jan Weitzel
• [PATCH] pcm049: add 1GB RAM support   Jan Weitzel
• [PATCH] pcm049: clean up   Jan Weitzel
• [PATCH] twl6030: Set WR_S for VMMC   Jan Weitzel
• [PATCH 1/3] USB: imx-usb-misc: add device tree support   Philipp Zabel
• [PATCH 2/3] USB: chipidea-imx: add basic device tree support   Philipp Zabel
• [PATCH 3/3] USB: imx-usb-phy: add device tree support   Philipp Zabel
• [PATCH v3 3/7] arm: initial support for Marvell Armada 370/XP SoCs   antonynpavlov at gmail.com
• [PATCH] gpio: fix typos   antonynpavlov at gmail.com
• Barebox Enviroment FileSystem   andreas.willig at rafi.de
• [PATCH] Added sd driver for bcm2835 (Raspberry PI)   wilhelm
• Find girls for chat and hookup now.   root at yandrewantop.com

Last message date: Fri May 31 21:56:40 EDT 2013
Archived on: Fri May 31 21:57:04 EDT 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...