[RFC, PATCH v2 1/3] MIPS: add Atheros ar531x family support
Oleksij Rempel
linux at rempel-privat.de
Wed May 22 03:49:47 EDT 2013
Signed-off-by: Oleksij Rempel <linux at rempel-privat.de>
Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
---
arch/mips/Kconfig | 10 +
arch/mips/Makefile | 2 +
arch/mips/mach-ar231x/Kconfig | 7 +
arch/mips/mach-ar231x/Makefile | 3 +
arch/mips/mach-ar231x/ar231x.c | 199 +++++++++++++++
arch/mips/mach-ar231x/ar231x_reset.c | 64 +++++
arch/mips/mach-ar231x/board.c | 184 ++++++++++++++
arch/mips/mach-ar231x/include/mach/ar2312_regs.h | 269 +++++++++++++++++++++
.../mach-ar231x/include/mach/ar231x_platform.h | 89 +++++++
arch/mips/mach-ar231x/include/mach/debug_ll.h | 35 +++
10 files changed, 862 insertions(+)
create mode 100644 arch/mips/mach-ar231x/Kconfig
create mode 100644 arch/mips/mach-ar231x/Makefile
create mode 100644 arch/mips/mach-ar231x/ar231x.c
create mode 100644 arch/mips/mach-ar231x/ar231x_reset.c
create mode 100644 arch/mips/mach-ar231x/board.c
create mode 100644 arch/mips/mach-ar231x/include/mach/ar2312_regs.h
create mode 100644 arch/mips/mach-ar231x/include/mach/ar231x_platform.h
create mode 100644 arch/mips/mach-ar231x/include/mach/debug_ll.h
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d58b804..8d2a2ce 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -45,6 +45,15 @@ config MACH_MIPS_MALTA
select SYS_SUPPORTS_BIG_ENDIAN
select HAS_DEBUG_LL
+config MACH_MIPS_AR231X
+ bool "Atheros ar231x-based boards"
+ select CSRC_R4K_LIB
+ select DRIVER_SERIAL_NS16550
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select HAS_DEBUG_LL
+
config MACH_MIPS_BCM47XX
bool "Broadcom BCM47xx-based boards"
select CSRC_R4K_LIB
@@ -64,6 +73,7 @@ config MACH_MIPS_XBURST
endchoice
source arch/mips/mach-malta/Kconfig
+source arch/mips/mach-ar231x/Kconfig
source arch/mips/mach-bcm47xx/Kconfig
source arch/mips/mach-xburst/Kconfig
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index c038933..135259f 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -72,6 +72,8 @@ LDFLAGS_barebox += -nostdlib
machine-$(CONFIG_MACH_MIPS_MALTA) := malta
board-$(CONFIG_BOARD_QEMU_MALTA) := qemu-malta
+machine-$(CONFIG_MACH_MIPS_AR231X) := ar231x
+
machine-$(CONFIG_MACH_MIPS_BCM47XX) := bcm47xx
board-$(CONFIG_BOARD_DLINK_DIR320) := dlink-dir-320
diff --git a/arch/mips/mach-ar231x/Kconfig b/arch/mips/mach-ar231x/Kconfig
new file mode 100644
index 0000000..7694fe2
--- /dev/null
+++ b/arch/mips/mach-ar231x/Kconfig
@@ -0,0 +1,7 @@
+if MACH_MIPS_AR231X
+
+config ARCH_TEXT_BASE
+ hex
+ default 0xa0800000
+
+endif
diff --git a/arch/mips/mach-ar231x/Makefile b/arch/mips/mach-ar231x/Makefile
new file mode 100644
index 0000000..eba8e81
--- /dev/null
+++ b/arch/mips/mach-ar231x/Makefile
@@ -0,0 +1,3 @@
+obj-y += ar231x.o
+obj-y += board.o
+obj-y += ar231x_reset.o
diff --git a/arch/mips/mach-ar231x/ar231x.c b/arch/mips/mach-ar231x/ar231x.c
new file mode 100644
index 0000000..d0add52
--- /dev/null
+++ b/arch/mips/mach-ar231x/ar231x.c
@@ -0,0 +1,199 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz at openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd at openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <ns16550.h>
+#include <mach/ar231x_platform.h>
+#include <mach/debug_ll.h>
+
+struct ar231x_board_data ar231x_board;
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
+
+static unsigned int
+ar2312_cpu_frequency(void)
+{
+ unsigned int predivide_mask, predivide_shift;
+ unsigned int multiplier_mask, multiplier_shift;
+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
+ unsigned int doubler_mask;
+ u32 devid;
+
+ devid = __raw_readl((char *)KSEG1ADDR(AR2312_REV));
+ devid &= AR2312_REV_MAJ;
+ devid >>= AR2312_REV_MAJ_S;
+ if (devid == AR2312_REV_MAJ_AR2313) {
+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+ } else { /* AR5312 and AR2312 */
+ predivide_mask = AR2312_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR2312_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR2312_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR2312_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR2312_CLOCKCTL1_DOUBLER_MASK;
+ }
+
+ /*
+ * Clocking is derived from a fixed 40MHz input clock.
+ *
+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
+ * flash, Timer, Watchdog Timer)
+ *
+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
+ *
+ * So, for example, with a PLL multiplier of 5, we have
+ *
+ * cpuFreq = 200MHz
+ * sysFreq = 50MHz
+ * cntFreq = 100MHz
+ *
+ * We compute the CPU frequency, based on PLL settings.
+ */
+
+ clockCtl1 = __raw_readl((char *)KSEG1ADDR(AR2312_CLOCKCTL1));
+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
+
+ if (clockCtl1 & doubler_mask) {
+ multiplier = multiplier << 1;
+ }
+ return (40000000 / preDivisor) * multiplier;
+}
+
+static unsigned int
+ar2312_sys_frequency(void)
+{
+ return ar2312_cpu_frequency() / 4;
+}
+
+/*
+ * shutdown watchdog
+ */
+static int watchdog_init(void)
+{
+ pr_debug("Disable watchdog.\n");
+ __raw_writeb(AR2312_WD_CTRL_IGNORE_EXPIRATION,
+ (char *)KSEG1ADDR(AR2312_WD_CTRL));
+ return 0;
+}
+
+static void flash_init(void)
+{
+ u32 ctl, old_ctl;
+
+ /* Configure flash bank 0.
+ * Assume 8M maximum window size on this SoC.
+ * Flash will be aliased if it's smaller
+ */
+ old_ctl = __raw_readl((char *)KSEG1ADDR(AR2312_FLASHCTL0));
+ ctl = FLASHCTL_E | FLASHCTL_AC_8M | FLASHCTL_RBLE |
+ (0x01 << FLASHCTL_IDCY_S) |
+ (0x07 << FLASHCTL_WST1_S) |
+ (0x07 << FLASHCTL_WST2_S) | (old_ctl & FLASHCTL_MW);
+
+ __raw_writel(ctl, (char *)KSEG1ADDR(AR2312_FLASHCTL0));
+ /* Disable other flash banks */
+ old_ctl = __raw_readl((char *)KSEG1ADDR(AR2312_FLASHCTL1));
+ __raw_writel(old_ctl & ~(FLASHCTL_E | FLASHCTL_AC),
+ (char *)KSEG1ADDR(AR2312_FLASHCTL1));
+
+ old_ctl = __raw_readl((char *)KSEG1ADDR(AR2312_FLASHCTL2));
+ __raw_writel(old_ctl & ~(FLASHCTL_E | FLASHCTL_AC),
+ (char *)KSEG1ADDR(AR2312_FLASHCTL2));
+
+ /* We need to find atheros config. MAC address is there. */
+ ar231x_find_config((char *)KSEG1ADDR(AR2312_FLASH + AR2312_MAX_FLASH_SIZE));
+ /* FIXME: currently we can't configure cfi flash. cfi driver is not able to
+ * auto detect bus and flash width.
+ */
+ add_cfi_flash_device(DEVICE_ID_SINGLE, KSEG1ADDR(AR2312_FLASH), 4 * 1024 * 1024, 0);
+}
+
+static int ether_init(void)
+{
+ static struct resource res[2];
+ struct ar231x_eth_platform_data *eth = &ar231x_board.eth_pdata;
+
+ /* Base ETH registers */
+ res[0].start = KSEG1ADDR(AR2312_ENET1);
+ res[0].end = res[0].start + 0x100000 - 1;
+ res[0].flags = IORESOURCE_MEM;
+ /* Base PHY registers */
+ res[1].start = KSEG1ADDR(AR2312_ENET0);
+ res[1].end = res[1].start + 0x100000 - 1;
+ res[1].flags = IORESOURCE_MEM;
+
+ /* MAC address located in atheros config on flash. */
+ eth->mac = ar231x_board.config->enet0_mac;
+
+ eth->reset_mac = AR2312_RESET_ENET1;
+ eth->reset_phy = AR2312_RESET_EPHY0;
+
+ eth->reset_bit = ar231x_reset_bit;
+
+ /* FIXME: base_reset should be replaced with reset driver */
+ eth->base_reset = KSEG1ADDR(AR2312_RESET);
+
+ add_generic_device_res("ar2312_eth", DEVICE_ID_DYNAMIC, res, 2, eth);
+ return 0;
+}
+
+static int platform_init(void)
+{
+ add_generic_device("ar2312_reset", DEVICE_ID_SINGLE, NULL,
+ KSEG1ADDR(AR2312_RESETTMR), 0x4,
+ IORESOURCE_MEM, NULL);
+ watchdog_init();
+ flash_init();
+ ether_init();
+ return 0;
+}
+late_initcall(platform_init);
+
+static struct NS16550_plat serial_plat = {
+ .shift = AR2312_UART_SHIFT,
+};
+
+static int ar2312_console_init(void)
+{
+ u32 reset;
+
+ /* reset UART0 */
+ reset = __raw_readl((char *)KSEG1ADDR(AR2312_RESET));
+ reset = ((reset & ~AR2312_RESET_APB) | AR2312_RESET_UART0);
+ __raw_writel(reset, (char *)KSEG1ADDR(AR2312_RESET));
+
+ reset &= ~AR2312_RESET_UART0;
+ __raw_writel(reset, (char *)KSEG1ADDR(AR2312_RESET));
+
+ /* Register the serial port */
+ serial_plat.clock = ar2312_sys_frequency();
+ add_ns16550_device(DEVICE_ID_DYNAMIC, KSEG1ADDR(AR2312_UART0),
+ 8 << AR2312_UART_SHIFT, IORESOURCE_MEM_8BIT, &serial_plat);
+ return 0;
+}
+console_initcall(ar2312_console_init);
diff --git a/arch/mips/mach-ar231x/ar231x_reset.c b/arch/mips/mach-ar231x/ar231x_reset.c
new file mode 100644
index 0000000..6a9b070
--- /dev/null
+++ b/arch/mips/mach-ar231x/ar231x_reset.c
@@ -0,0 +1,64 @@
+#include <common.h>
+#include <init.h>
+#include <io.h>
+
+#include <mach/ar2312_regs.h>
+#include <mach/ar231x_platform.h>
+
+static void __iomem *reset_base;
+
+void __noreturn reset_cpu(ulong addr)
+{
+ printf("reseting cpu\n");
+ __raw_writel(0x10000,
+ (char *)KSEG1ADDR(AR2312_WD_TIMER));
+ __raw_writel(AR2312_WD_CTRL_RESET,
+ (char *)KSEG1ADDR(AR2312_WD_CTRL));
+ unreachable();
+}
+EXPORT_SYMBOL(reset_cpu);
+
+static u32 ar231x_reset_readl(void)
+{
+ return __raw_readl(reset_base);
+}
+
+static void ar231x_reset_writel(u32 val)
+{
+ __raw_writel(val, reset_base);
+}
+
+void ar231x_reset_bit(u32 val, enum reset_state state)
+{
+ u32 tmp;
+
+ tmp = ar231x_reset_readl();
+
+ if (state == REMOVE)
+ ar231x_reset_writel(tmp & ~val);
+ else
+ ar231x_reset_writel(tmp | val);
+}
+EXPORT_SYMBOL(ar231x_reset_bit);
+
+static int ar231x_reset_probe(struct device_d *dev)
+{
+ reset_base = dev_request_mem_region(dev, 0);
+ if (!reset_base) {
+ dev_err(dev, "could not get memory region\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static struct driver_d ar231x_reset_driver = {
+ .probe = ar231x_reset_probe,
+ .name = "ar231x_reset",
+};
+
+static int ar231x_reset_init(void)
+{
+ return platform_driver_register(&ar231x_reset_driver);
+}
+coredevice_initcall(ar231x_reset_init);
diff --git a/arch/mips/mach-ar231x/board.c b/arch/mips/mach-ar231x/board.c
new file mode 100644
index 0000000..69ee882
--- /dev/null
+++ b/arch/mips/mach-ar231x/board.c
@@ -0,0 +1,184 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz at openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd at openwrt.org>
+ * Copyright (C) 2013 Oleksij Rempel <linux at rempel-privat.de>
+ */
+
+#include <common.h>
+#include <io.h>
+#include <mach/ar2312_regs.h>
+#include <mach/ar231x_platform.h>
+// this is needed only by eclipse
+#include <linux/stddef.h>
+#include <net.h>
+
+#define HDR_SIZE 6
+
+#define TAB_1 "\t"
+#define TAB_2 "\t\t"
+
+extern struct ar231x_board_data ar231x_board;
+
+static void
+ar231x_print_mac(unsigned char *mac)
+{
+ int i;
+ for (i = 0; i < 5; i++) {
+ printf("%02x:", mac[i]);
+ }
+ printf("%02x\n", mac[5]);
+}
+
+#ifdef DEBUG_BOARD
+static void
+ar231x_print_board_config(struct ar231x_board_config *config)
+{
+ printf("board config:\n");
+ printf(TAB_1 "chsum:" TAB_2 "%04x\n", config->cksum);
+ printf(TAB_1 "rev:" TAB_2 "%04x\n", config->rev);
+ printf(TAB_1 "name:" TAB_2 "%s\n", config->boardName);
+ printf(TAB_1 "maj:" TAB_2 "%04x\n", config->major);
+ printf(TAB_1 "min:" TAB_2 "%04x\n", config->minor);
+ printf(TAB_1 "board flags:" TAB_1 "%08x\n", config->flags);
+
+ if (config->flags & BD_ENET0)
+ printf(TAB_2 "ENET0 is stuffed\n");
+ if (config->flags & BD_ENET1)
+ printf(TAB_2 "ENET1 is stuffed\n");
+ if (config->flags & BD_UART1)
+ printf(TAB_2 "UART1 is stuffed\n");
+ if (config->flags & BD_UART0)
+ printf(TAB_2 "UART0 is stuffed (dma)\n");
+ if (config->flags & BD_RSTFACTORY)
+ printf(TAB_2 "Reset factory defaults stuffed\n");
+ if (config->flags & BD_SYSLED)
+ printf(TAB_2 "System LED stuffed\n");
+ if (config->flags & BD_EXTUARTCLK)
+ printf(TAB_2 "External UART clock\n");
+ if (config->flags & BD_CPUFREQ)
+ printf(TAB_2 "cpu freq is valid in nvram\n");
+ if (config->flags & BD_SYSFREQ)
+ printf(TAB_2 "sys freq is set in nvram\n");
+ if (config->flags & BD_WLAN0)
+ printf(TAB_2 "Enable WLAN0\n");
+ if (config->flags & BD_MEMCAP)
+ printf(TAB_2 "CAP SDRAM @ memCap for testing\n");
+ if (config->flags & BD_DISWATCHDOG)
+ printf(TAB_2 "disable system watchdog\n");
+ if (config->flags & BD_WLAN1)
+ printf(TAB_2 "Enable WLAN1 (ar5212)\n");
+ if (config->flags & BD_ISCASPER)
+ printf(TAB_2 "FLAG for AR2312\n");
+ if (config->flags & BD_WLAN0_2G_EN)
+ printf(TAB_2 "FLAG for radio0_2G\n");
+ if (config->flags & BD_WLAN0_5G_EN)
+ printf(TAB_2 "FLAG for radio0_5G\n");
+ if (config->flags & BD_WLAN1_2G_EN)
+ printf(TAB_2 "FLAG for radio1_2G\n");
+ if (config->flags & BD_WLAN1_5G_EN)
+ printf(TAB_2 "FLAG for radio1_5G\n");
+
+ printf(TAB_1 "ResetConf GPIO pin:" TAB_1 "%04x\n", config->resetConfigGpio);
+ printf(TAB_1 "Sys LED GPIO pin:" TAB_1 "%04x\n", config->sysLedGpio);
+ printf(TAB_1 "CPU Freq:" TAB_2 "%u\n", config->cpuFreq);
+ printf(TAB_1 "Sys Freq:" TAB_2 "%u\n", config->sysFreq);
+ printf(TAB_1 "Calculated Freq:" TAB_1 "%u\n", config->cntFreq);
+
+ printf(TAB_1 "wlan0 mac:" TAB_2);
+ ar231x_print_mac(config->wlan0_mac);
+ printf(TAB_1 "wlan1 mac:" TAB_2);
+ ar231x_print_mac(config->wlan1_mac);
+ printf(TAB_1 "eth0 mac:" TAB_2);
+ ar231x_print_mac(config->enet0_mac);
+ printf(TAB_1 "eth1 mac:" TAB_2);
+ ar231x_print_mac(config->enet1_mac);
+
+ printf(TAB_1 "Pseudo PCIID:" TAB_2 "%04x\n", config->pciId);
+ printf(TAB_1 "Mem capacity:" TAB_2 "%u\n", config->memCap);
+}
+#endif
+
+static u16
+ar231x_cksum16(u8 *data, int size)
+{
+ int i;
+ u16 sum;
+
+ for (i = 0; i < size; i++)
+ sum += data[i];
+
+ return sum;
+}
+
+static void
+ar231x_check_mac(u8 *addr)
+{
+ if (!is_valid_ether_addr(addr)) {
+ pr_warn("config: no valid mac was found. "
+ "Generating random mac: ");
+ random_ether_addr(addr);
+ ar231x_print_mac(addr);
+ }
+}
+
+static u8 *
+ar231x_find_board_config(u8 *flash_limit)
+{
+ u8 *addr;
+ int found = 0;
+
+ for (addr = flash_limit - 0x1000;
+ addr >= flash_limit - 0x30000;
+ addr -= 0x1000) {
+
+ if (*((u32 *)addr) == AR231X_BD_MAGIC) {
+ found = 1;
+ pr_debug("config at %x\n", addr);
+ break;
+ }
+ }
+
+ if (!found)
+ addr = NULL;
+
+ return addr;
+}
+
+void
+ar231x_find_config(u8 *flash_limit)
+{
+ struct ar231x_board_config *config;
+ u8 *bcfg, bsize;
+ u8 brocken;
+
+ bcfg = ar231x_find_board_config(flash_limit);
+
+ bsize = sizeof(struct ar231x_board_config);
+ config = xzalloc(bsize);
+ ar231x_board.config = config;
+
+ if (bcfg) {
+ u16 cksum;
+ /* Copy the board and radio data to RAM, because accessing the mapped
+ * memory of the flash directly after booting is not safe */
+ memcpy(config, bcfg, bsize);
+ cksum= 0xca + ar231x_cksum16((unsigned char *)config + HDR_SIZE,
+ sizeof(struct ar231x_board_config) - HDR_SIZE);
+ if (cksum != config->cksum) {
+ pr_err("config: checksum is invalid: %04x != %04x\n",
+ cksum, config->cksum);
+ brocken = 1;
+ }
+ /* ar231x_print_board_config(config); */
+ }
+
+ /* We do not care about wlans here */
+ ar231x_check_mac(config->enet0_mac);
+ ar231x_check_mac(config->enet1_mac);
+}
diff --git a/arch/mips/mach-ar231x/include/mach/ar2312_regs.h b/arch/mips/mach-ar231x/include/mach/ar2312_regs.h
new file mode 100644
index 0000000..bc2f22d
--- /dev/null
+++ b/arch/mips/mach-ar231x/include/mach/ar2312_regs.h
@@ -0,0 +1,269 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 Imre Kaloz <kaloz at openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd at openwrt.org>
+ */
+
+#ifndef AR2312_H
+#define AR2312_H
+
+#include <asm/addrspace.h>
+
+/* Address Map */
+#define AR2312_SDRAM0 0x00000000
+#define AR2312_SDRAM1 0x08000000
+#define AR2312_WLAN0 0x18000000
+#define AR2312_WLAN1 0x18500000
+#define AR2312_ENET0 0x18100000
+#define AR2312_ENET1 0x18200000
+#define AR2312_SDRAMCTL 0x18300000
+#define AR2312_FLASHCTL 0x18400000
+#define AR2312_APBBASE 0x1c000000
+#define AR2312_FLASH 0x1e000000
+
+#define AR2312_CPU_CLOCK_RATE 180000000
+/* Used by romSizeMemory to set SDRAM Memory Refresh */
+#define AR2312_SDRAM_CLOCK_RATE (AR2312_CPU_CLOCK_RATE / 2)
+/*
+ * SDRAM Memory Refresh (MEM_REF) value is computed as:
+ * 15.625us * SDRAM_CLOCK_RATE (in MHZ)
+ */
+#define DESIRED_MEMORY_REFRESH_NSECS 15625
+#define AR2312_SDRAM_MEMORY_REFRESH_VALUE \
+ ((DESIRED_MEMORY_REFRESH_NSECS * AR2312_SDRAM_CLOCK_RATE/1000000) / 1000)
+
+/*
+ * APB Address Map
+ */
+#define AR2312_UART0 (AR2312_APBBASE + 0x0003) /* high speed uart */
+#define AR2312_UART_SHIFT 2
+#define AR2312_UART1 (AR2312_APBBASE + 0x1000) /* ar2312 only */
+#define AR2312_GPIO (AR2312_APBBASE + 0x2000)
+#define AR2312_RESETTMR (AR2312_APBBASE + 0x3000)
+#define AR2312_APB2AHB (AR2312_APBBASE + 0x4000)
+
+/*
+ * AR2312_NUM_ENET_MAC defines the number of ethernet MACs that
+ * should be considered available. The AR2312 supports 2 enet MACS,
+ * even though many reference boards only actually use 1 of them
+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
+ * The AR2312 supports 1 enet MAC.
+ */
+#define AR2312_NUM_ENET_MAC 2
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5212_AR2312_REV2 0x0052 /* AR2312 WMAC (AP31) */
+#define AR5212_AR2312_REV7 0x0057 /* AR2312 WMAC (AP30-040) */
+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+
+/*
+ * AR2312_NUM_WMAC defines the number of Wireless MACs that\
+ * should be considered available.
+ */
+#define AR2312_NUM_WMAC 2
+
+/* Reset/Timer Block Address Map */
+#define AR2312_RESETTMR (AR2312_APBBASE + 0x3000)
+#define AR2312_TIMER (AR2312_RESETTMR + 0x0000) /* countdown timer */
+#define AR2312_WD_CTRL (AR2312_RESETTMR + 0x0008) /* watchdog cntrl */
+#define AR2312_WD_TIMER (AR2312_RESETTMR + 0x000c) /* watchdog timer */
+#define AR2312_ISR (AR2312_RESETTMR + 0x0010) /* Intr Status Reg */
+#define AR2312_IMR (AR2312_RESETTMR + 0x0014) /* Intr Mask Reg */
+#define AR2312_RESET (AR2312_RESETTMR + 0x0020)
+#define AR2312_CLOCKCTL0 (AR2312_RESETTMR + 0x0060)
+#define AR2312_CLOCKCTL1 (AR2312_RESETTMR + 0x0064)
+#define AR2312_CLOCKCTL2 (AR2312_RESETTMR + 0x0068)
+#define AR2312_SCRATCH (AR2312_RESETTMR + 0x006c)
+#define AR2312_PROCADDR (AR2312_RESETTMR + 0x0070)
+#define AR2312_PROC1 (AR2312_RESETTMR + 0x0074)
+#define AR2312_DMAADDR (AR2312_RESETTMR + 0x0078)
+#define AR2312_DMA1 (AR2312_RESETTMR + 0x007c)
+#define AR2312_ENABLE (AR2312_RESETTMR + 0x0080) /* interface enb */
+#define AR2312_REV (AR2312_RESETTMR + 0x0090) /* revision */
+
+/* AR2312_WD_CTRL register bit field definitions */
+#define AR2312_WD_CTRL_IGNORE_EXPIRATION 0x0000
+#define AR2312_WD_CTRL_NMI 0x0001
+#define AR2312_WD_CTRL_RESET 0x0002
+
+/* AR2312_ISR register bit field definitions */
+#define AR2312_ISR_NONE 0x0000
+#define AR2312_ISR_TIMER 0x0001
+#define AR2312_ISR_AHBPROC 0x0002
+#define AR2312_ISR_AHBDMA 0x0004
+#define AR2312_ISR_GPIO 0x0008
+#define AR2312_ISR_UART0 0x0010
+#define AR2312_ISR_UART0DMA 0x0020
+#define AR2312_ISR_WD 0x0040
+#define AR2312_ISR_LOCAL 0x0080
+
+/* AR2312_RESET register bit field definitions */
+#define AR2312_RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define AR2312_RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define AR2312_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
+#define AR2312_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define AR2312_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define AR2312_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
+#define AR2312_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
+#define AR2312_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
+#define AR2312_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
+#define AR2312_RESET_APB 0x00000400 /* cold reset APB (ar2312) */
+#define AR2312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
+#define AR2312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
+#define AR2312_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
+#define AR2312_RESET_NMI 0x00010000 /* send an NMI to the processor */
+#define AR2312_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
+#define AR2312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
+#define AR2312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
+#define AR2312_RESET_WDOG 0x00100000 /* last reset was a watchdog */
+
+/* AR2312_CLOCKCTL1 register bit field definitions */
+#define AR2312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR2312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR2312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR2312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR2312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
+
+/* AR2312_ENABLE register bit field definitions */
+#define AR2312_ENABLE_WLAN0 0x0001
+#define AR2312_ENABLE_ENET0 0x0002
+#define AR2312_ENABLE_ENET1 0x0004
+#define AR2312_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
+#define AR2312_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
+#define AR2312_ENABLE_WLAN1 \
+ (AR2312_ENABLE_UART_AND_WLAN1_PIO | AR2312_ENABLE_WLAN1_DMA)
+
+/* AR2312_REV register bit field definitions */
+#define AR2312_REV_WMAC_MAJ 0xf000
+#define AR2312_REV_WMAC_MAJ_S 12
+#define AR2312_REV_WMAC_MIN 0x0f00
+#define AR2312_REV_WMAC_MIN_S 8
+#define AR2312_REV_MAJ 0x00f0
+#define AR2312_REV_MAJ_S 4
+#define AR2312_REV_MIN 0x000f
+#define AR2312_REV_MIN_S 0
+#define AR2312_REV_CHIP (AR2312_REV_MAJ|AR2312_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR2312_REV_MAJ_AR2312 0x4
+#define AR2312_REV_MAJ_AR2313 0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR2312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
+#define AR2312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
+
+/* AR2312_FLASHCTL register bit field definitions */
+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
+#define FLASHCTL_IDCY_S 0
+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
+#define FLASHCTL_WST1_S 5
+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
+#define FLASHCTL_WST2_S 11
+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
+#define FLASHCTL_AC_S 16
+#define FLASHCTL_AC_128K 0x00000000
+#define FLASHCTL_AC_256K 0x00010000
+#define FLASHCTL_AC_512K 0x00020000
+#define FLASHCTL_AC_1M 0x00030000
+#define FLASHCTL_AC_2M 0x00040000
+#define FLASHCTL_AC_4M 0x00050000
+#define FLASHCTL_AC_8M 0x00060000
+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
+#define FLASHCTL_WP 0x04000000 /* Write protect */
+#define FLASHCTL_BM 0x08000000 /* Burst mode */
+#define FLASHCTL_MW 0x30000000 /* Memory width */
+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
+
+#define AR2312_MAX_FLASH_SIZE 0x800000
+
+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
+#define AR2312_FLASHCTL0 (AR2312_FLASHCTL + 0x00)
+#define AR2312_FLASHCTL1 (AR2312_FLASHCTL + 0x04)
+#define AR2312_FLASHCTL2 (AR2312_FLASHCTL + 0x08)
+
+/* ARM SDRAM Controller -- just enough to determine memory size */
+#define AR2312_MEM_CFG0 (AR2312_SDRAMCTL + 0x00)
+#define AR2312_MEM_CFG1 (AR2312_SDRAMCTL + 0x04)
+#define AR2312_MEM_REF (AR2312_SDRAMCTL + 0x08) /* 16 bit value */
+
+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
+#define MEM_CFG1_AC0_S 8
+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
+#define MEM_CFG1_AC1_S 12
+
+#define MEM_CFG0_F0 0x00000002 /* bank 0: 256Mb support */
+#define MEM_CFG0_T0 0x00000004 /* bank 0: chip width */
+#define MEM_CFG0_B0 0x00000008 /* bank 0: 2 vs 4 bank */
+#define MEM_CFG0_F1 0x00000020 /* bank 1: 256Mb support */
+#define MEM_CFG0_T1 0x00000040 /* bank 1: chip width */
+#define MEM_CFG0_B1 0x00000080 /* bank 1: 2 vs 4 bank */
+ /* bank 2 and 3 are not supported */
+#define MEM_CFG0_E 0x00020000 /* SDRAM clock control */
+#define MEM_CFG0_C 0x00040000 /* SDRAM clock enable */
+#define MEM_CFG0_X 0x00080000 /* bus width (0 == 32b) */
+#define MEM_CFG0_CAS 0x00300000 /* CAS latency (1-3) */
+#define MEM_CFG0_C1 0x00100000
+#define MEM_CFG0_C2 0x00200000
+#define MEM_CFG0_C3 0x00300000
+#define MEM_CFG0_R 0x00c00000 /* RAS to CAS latency (1-3) */
+#define MEM_CFG0_R1 0x00400000
+#define MEM_CFG0_R2 0x00800000
+#define MEM_CFG0_R3 0x00c00000
+#define MEM_CFG0_A 0x01000000 /* AHB auto pre-charge */
+
+#define MEM_CFG1_I 0x00000001 /* memory init control */
+#define MEM_CFG1_M 0x00000002 /* memory init control */
+#define MEM_CFG1_R 0x00000004 /* read buffer enable (unused) */
+#define MEM_CFG1_W 0x00000008 /* write buffer enable (unused) */
+#define MEM_CFG1_B 0x00000010 /* SDRAM engine busy */
+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
+#define MEM_CFG1_AC_2 0 /* AC of 2MB */
+#define MEM_CFG1_AC_4 1 /* AC of 4MB */
+#define MEM_CFG1_AC_8 2 /* AC of 8MB */
+#define MEM_CFG1_AC_16 3 /* AC of 16MB */
+#define MEM_CFG1_AC_32 4 /* AC of 32MB */
+#define MEM_CFG1_AC_64 5 /* AC of 64MB */
+#define MEM_CFG1_AC_128 6 /* AC of 128MB */
+#define MEM_CFG1_AC0_S 8
+#define MEM_CFG1_E0 0x00000800 /* bank 0: enable */
+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
+#define MEM_CFG1_AC1_S 12
+#define MEM_CFG1_E1 0x00008000 /* bank 1: enable */
+
+/* GPIO Address Map */
+#define AR2312_GPIO (AR2312_APBBASE + 0x2000)
+#define AR2312_GPIO_DO (AR2312_GPIO + 0x00) /* output register */
+#define AR2312_GPIO_DI (AR2312_GPIO + 0x04) /* intput register */
+#define AR2312_GPIO_CR (AR2312_GPIO + 0x08) /* control register */
+
+/* GPIO Control Register bit field definitions */
+#define AR2312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
+#define AR2312_GPIO_CR_O(x) (0 << (x)) /* mask for output */
+#define AR2312_GPIO_CR_I(x) (1 << (x)) /* mask for input */
+#define AR2312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
+#define AR2312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
+#define AR2312_NUM_GPIO 8
+
+#endif
diff --git a/arch/mips/mach-ar231x/include/mach/ar231x_platform.h b/arch/mips/mach-ar231x/include/mach/ar231x_platform.h
new file mode 100644
index 0000000..9784879
--- /dev/null
+++ b/arch/mips/mach-ar231x/include/mach/ar231x_platform.h
@@ -0,0 +1,89 @@
+#ifndef __AR231X_PLATFORM_H
+#define __AR231X_PLATFORM_H
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
+ * It is shared across operating systems, so it should not be changed lightly.
+ * The main reason we need it is in order to extract the ethernet MAC
+ * address(es).
+ */
+struct ar231x_board_config {
+ u32 magic; /* board data is valid */
+#define AR231X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
+ u16 cksum; /* checksum (starting with BD_REV 2) */
+ u16 rev; /* revision of this struct */
+#define BD_REV 4
+ char boardName[64]; /* Name of board */
+ u16 major; /* Board major number */
+ u16 minor; /* Board minor number */
+ u32 flags; /* Board configuration */
+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
+#define BD_UART1 0x00000004 /* UART1 is stuffed */
+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
+#define BD_SYSLED 0x00000020 /* System LED stuffed */
+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
+ u16 resetConfigGpio; /* Reset factory GPIO pin */
+ u16 sysLedGpio; /* System LED GPIO pin */
+
+ u32 cpuFreq; /* CPU core frequency in Hz */
+ u32 sysFreq; /* System frequency in Hz */
+ u32 cntFreq; /* Calculated C0_COUNT frequency */
+
+ u8 wlan0_mac[6];
+ u8 enet0_mac[6];
+ u8 enet1_mac[6];
+
+ u16 pciId; /* Pseudo PCIID for common code */
+ u16 memCap; /* cap bank1 in MB */
+
+ /* version 3 */
+ u8 wlan1_mac[6]; /* (ar5212) */
+};
+
+#define BOARD_CONFIG_BUFSZ 0x1000
+
+/*
+ * Platform device information for the Ethernet MAC
+ */
+enum reset_state {
+ SET,
+ REMOVE,
+};
+
+struct ar231x_eth_platform_data {
+ u32 base_reset;
+ u32 reset_mac;
+ u32 reset_phy;
+
+ u8 *mac;
+
+ void (*reset_bit)(u32 val, enum reset_state state);
+};
+
+struct ar231x_board_data {
+ u16 devid;
+
+ /* board config data */
+ struct ar231x_board_config *config;
+
+ struct ar231x_eth_platform_data eth_pdata;
+};
+
+void ar231x_find_config(u8 *flash_limit);
+
+void ar231x_reset_bit(u32 val, enum reset_state state);
+
+#endif /* __AR231X_PLATFORM_H */
diff --git a/arch/mips/mach-ar231x/include/mach/debug_ll.h b/arch/mips/mach-ar231x/include/mach/debug_ll.h
new file mode 100644
index 0000000..92da40f
--- /dev/null
+++ b/arch/mips/mach-ar231x/include/mach/debug_ll.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2011 Antony Pavlov <antonynpavlov at gmail.com>
+ *
+ * This file is part of barebox.
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/** @file
+ * This File contains declaration for early output support
+ */
+#ifndef __MACH_AR231X_DEBUG_LL_H__
+#define __MACH_AR231X_DEBUG_LL_H__
+
+#include <mach/ar2312_regs.h>
+
+#define DEBUG_LL_UART_ADDR KSEG1ADDR(AR2312_UART0)
+#define DEBUG_LL_UART_SHIFT AR2312_UART_SHIFT
+
+#define DEBUG_LL_UART_CLK (45000000 / 16)
+#define DEBUG_LL_UART_BPS CONFIG_BAUDRATE
+#define DEBUG_LL_UART_DIVISOR (DEBUG_LL_UART_CLK / DEBUG_LL_UART_BPS)
+
+#include <debug_ll_ns16550.h>
+
+#endif /* __MACH_AR231X_DEBUG_LL_H__ */
--
1.8.1.2
More information about the barebox
mailing list