Installing barebox for karo-tx53 in nand-flash

[Christoph Fritz]

On Fri, 2013-05-10 at 14:53 +0200, Eric Bénard wrote:
> > > My boot sources are nand-flash (thats where u-boot is at the moment)
> > > (and SD-card for testing).
> > > 
> > > I tried to flash zbarebox.bin to nand-flash. It started but with error
> > > nand: NAND type unknown, ec,f1
> > > nand: No NAND device found (-19)!
> > 
> > Hm, strange. This should be a Samsung 128MiB NAND flash. The id is in
> > the database. I currently have no good idea why this isa unknown.
> > 
> may you please try with his patch :
> http://lists.infradead.org/pipermail/barebox/2013-May/014470.html
> and tell if that solves this NAND flash issue.

Successfully tested your patch on an omap3-board: NAND detection works
again. Without the patch I get the same kind of error as above.

> It seems my tests for 4c2bdc8728016b3412523e3264651651fe752860 were
> wrong as all the board I'm using for my tests have ONFI flashes ...
> so I'll fit one with a non ONFI flash for the next time.