Installing barebox for karo-tx53 in nand-flash

[Eric Bénard]

Hi Christoph,

Le Tue, 14 May 2013 19:15:31 +0200,
Christoph Fritz <chf.fritz at googlemail.com> a écrit :

> On Fri, 2013-05-10 at 14:53 +0200, Eric Bénard wrote:
> > > > My boot sources are nand-flash (thats where u-boot is at the moment)
> > > > (and SD-card for testing).
> > > > 
> > > > I tried to flash zbarebox.bin to nand-flash. It started but with error
> > > > nand: NAND type unknown, ec,f1
> > > > nand: No NAND device found (-19)!
> > > 
> > > Hm, strange. This should be a Samsung 128MiB NAND flash. The id is in
> > > the database. I currently have no good idea why this isa unknown.
> > > 
> > may you please try with his patch :
> > http://lists.infradead.org/pipermail/barebox/2013-May/014470.html
> > and tell if that solves this NAND flash issue.
> 
> Successfully tested your patch on an omap3-board: NAND detection works
> again. Without the patch I get the same kind of error as above.
> 
OK thanks for the testing. I'll send an updated patch (cosmetic fix)
tomorrow.

Best regards
Eric