[RFC, PATCH v2 2/3] net: add ar231x-eth support
Oleksij Rempel
linux at rempel-privat.de
Wed May 22 03:49:48 EDT 2013
This driver should work with some Atheros WiSoCs:
- ar2312, ar2313
- ar2315, ar2316 ...
Signed-off-by: Oleksij Rempel <linux at rempel-privat.de>
---
drivers/net/Kconfig | 7 +
drivers/net/Makefile | 1 +
drivers/net/ar231x.c | 429 +++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/ar231x.h | 219 ++++++++++++++++++++++++++
4 files changed, 656 insertions(+)
create mode 100644 drivers/net/ar231x.c
create mode 100644 drivers/net/ar231x.h
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2736094..5ad3e4d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -27,6 +27,13 @@ menu "Network drivers"
source "drivers/net/phy/Kconfig"
+config DRIVER_NET_AR231X
+ bool "AR231X Ethernet support"
+ depends on MACH_MIPS_AR231X
+ select PHYLIB
+ help
+ Support for the AR231x/531x ethernet controller
+
config DRIVER_NET_CALXEDA_XGMAC
bool "Calxeda xgmac"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 42136f8..73403fe 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_DRIVER_NET_AR231X) += ar231x.o
obj-$(CONFIG_DRIVER_NET_CALXEDA_XGMAC) += xgmac.o
obj-$(CONFIG_DRIVER_NET_CS8900) += cs8900.o
obj-$(CONFIG_DRIVER_NET_CPSW) += cpsw.o
diff --git a/drivers/net/ar231x.c b/drivers/net/ar231x.c
new file mode 100644
index 0000000..e7c0da7
--- /dev/null
+++ b/drivers/net/ar231x.c
@@ -0,0 +1,429 @@
+/*
+ * ar231x.c: driver for the Atheros AR231x Ethernet device.
+ * This device is build in to SoC on ar231x series.
+ * All known of them are big endian.
+ *
+ * Based on Linux driver:
+ * Copyright (C) 2004 by Sameer Dekate <sdekate at arubanetworks.com>
+ * Copyright (C) 2006 Imre Kaloz <kaloz at openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd at openwrt.org>
+ * Ported to Barebox:
+ * Copyright (C) 2013 Oleksij Rempel <linux at rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+/*
+ * Known issues:
+ * - broadcast packets are not filtered by hardware. On noisy network with
+ * lots of bcast packages rx_buffer can be completely filled after. Currently
+ * we clear rx_buffer transmit some package.
+ */
+
+#include <common.h>
+#include <net.h>
+#include <init.h>
+#include <io.h>
+
+#include "ar231x.h"
+
+static inline void dma_writel(struct ar231x_eth_priv *priv,
+ u32 val, int reg)
+{
+ __raw_writel(val, priv->dma_regs + reg);
+}
+
+static inline u32 dma_readl(struct ar231x_eth_priv *priv, int reg)
+{
+ return __raw_readl(priv->dma_regs + reg);
+}
+
+static inline void eth_writel(struct ar231x_eth_priv *priv,
+ u32 val, int reg)
+{
+ __raw_writel(val, priv->eth_regs + reg);
+}
+
+static inline u32 eth_readl(struct ar231x_eth_priv *priv, int reg)
+{
+ return __raw_readl(priv->eth_regs + reg);
+}
+
+static inline void phy_writel(struct ar231x_eth_priv *priv,
+ u32 val, int reg)
+{
+ __raw_writel(val, priv->phy_regs + reg);
+}
+
+static inline u32 phy_readl(struct ar231x_eth_priv *priv, int reg)
+{
+ return __raw_readl(priv->phy_regs + reg);
+}
+
+static void ar231x_reset_bit_(struct ar231x_eth_priv *priv,
+ u32 val, enum reset_state state)
+{
+ if (priv->reset_bit) {
+ (*priv->reset_bit)(val, state);
+ }
+}
+
+static int ar231x_set_ethaddr(struct eth_device *edev, unsigned char *addr);
+static void ar231x_reset_regs(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ struct ar231x_eth_platform_data *cfg = priv->cfg;
+ u32 flags;
+
+ ar231x_reset_bit_(priv, cfg->reset_mac, SET);
+ mdelay(10);
+
+ ar231x_reset_bit_(priv, cfg->reset_mac, REMOVE);
+ mdelay(10);
+
+ ar231x_reset_bit_(priv, cfg->reset_phy, SET);
+ mdelay(10);
+
+ ar231x_reset_bit_(priv, cfg->reset_phy, REMOVE);
+ mdelay(10);
+
+ dma_writel(priv, DMA_BUS_MODE_SWR, AR231X_DMA_BUS_MODE);
+ mdelay(10);
+
+ dma_writel(priv, ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE),
+ AR231X_DMA_BUS_MODE);
+
+ /* FIXME: priv->{t,r}x_ring are virtual addresses,
+ * use virt-to-phys convertion */
+ dma_writel(priv, (u32)priv->tx_ring, AR231X_DMA_TX_RING);
+ dma_writel(priv, (u32)priv->rx_ring, AR231X_DMA_RX_RING);
+
+ dma_writel(priv, (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF),
+ AR231X_DMA_CONTROL);
+
+ eth_writel(priv, FLOW_CONTROL_FCE, AR231X_ETH_FLOW_CONTROL);
+ /* TODO: not sure if we need it here. */
+ eth_writel(priv, 0x8100, AR231X_ETH_VLAN_TAG);
+
+ /* Enable Ethernet Interface */
+ flags = (MAC_CONTROL_TE | /* transmit enable */
+ /* FIXME: MAC_CONTROL_PM - pass mcast.
+ * Seems like it makes no difference on some WiSoCs,
+ * for example ar2313.
+ * It should be tested on ar231[5,6,7] */
+ MAC_CONTROL_PM |
+ MAC_CONTROL_F | /* full duplex */
+ MAC_CONTROL_HBD); /* heart beat disabled */
+ eth_writel(priv, flags, AR231X_ETH_MAC_CONTROL);
+}
+
+static void ar231x_flash_rxdsc(struct ar231x_descr *rxdsc)
+{
+ rxdsc->status = DMA_RX_OWN;
+ rxdsc->devcs = ((AR2313_RX_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+ DMA_RX1_CHAINED);
+}
+
+static void ar231x_allocate_dma_descriptors(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ u16 ar231x_descr_size = sizeof(struct ar231x_descr);
+ u16 i;
+
+ priv->tx_ring = xmalloc(ar231x_descr_size);
+ dev_dbg(&edev->dev, "allocate tx_ring @ %p\n", priv->tx_ring);
+
+ priv->rx_ring = xmalloc(ar231x_descr_size * AR2313_RXDSC_ENTRIES);
+ dev_dbg(&edev->dev, "allocate rx_ring @ %p\n", priv->rx_ring);
+
+ priv->rx_buffer = xmalloc(AR2313_RX_BUFSIZE * AR2313_RXDSC_ENTRIES);
+ dev_dbg(&edev->dev, "allocate rx_buffer @ %p\n", priv->rx_buffer);
+
+ /* Initialize the rx Descriptors */
+ for (i = 0; i < AR2313_RXDSC_ENTRIES; i++) {
+ struct ar231x_descr *rxdsc = &priv->rx_ring[i];
+ ar231x_flash_rxdsc(rxdsc);
+ rxdsc->buffer_ptr =
+ (u32)(priv->rx_buffer + AR2313_RX_BUFSIZE * i);
+ rxdsc->next_dsc_ptr = (u32)&priv->rx_ring[DSC_NEXT(i)];
+ }
+ /* set initial position of ring descriptor */
+ priv->next_rxdsc = &priv->rx_ring[0];
+}
+
+static void ar231x_adjust_link(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ u32 mc;
+
+ if (edev->phydev->duplex != priv->oldduplex) {
+ mc = eth_readl(priv, AR231X_ETH_MAC_CONTROL);
+ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
+ if (edev->phydev->duplex)
+ mc |= MAC_CONTROL_F;
+ else
+ mc |= MAC_CONTROL_DRO;
+ eth_writel(priv, mc, AR231X_ETH_MAC_CONTROL);
+ priv->oldduplex = edev->phydev->duplex;
+ }
+}
+
+static int ar231x_eth_init(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+
+ ar231x_allocate_dma_descriptors(edev);
+ ar231x_reset_regs(edev);
+ ar231x_set_ethaddr(edev, priv->mac);
+ return 0;
+}
+
+static int ar231x_eth_open(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ u32 tmp;
+
+ /* Enable RX. Now the rx_buffer will be filled.
+ * If it is full we may lose first transmission. In this case
+ * barebox should retry it.
+ * Or TODO: - force HW to filter some how broadcasts
+ * - disable RX if we do not need it. */
+ tmp = eth_readl(priv, AR231X_ETH_MAC_CONTROL);
+ eth_writel(priv, (tmp | MAC_CONTROL_RE), AR231X_ETH_MAC_CONTROL);
+
+ return phy_device_connect(edev, &priv->miibus, (int)priv->phy_regs,
+ ar231x_adjust_link, 0, PHY_INTERFACE_MODE_MII);
+}
+
+static int ar231x_eth_recv(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+
+ while (1) {
+ struct ar231x_descr *rxdsc = priv->next_rxdsc;
+ u32 status = rxdsc->status;
+
+ /* owned by DMA? */
+ if (status & DMA_RX_OWN)
+ break;
+
+ /* Pick only packets what we can handle:
+ * - only complete packet per buffer
+ * (First and Last at same time)
+ * - drop multicast */
+ if (!priv->kill_rx_ring &&
+ ((status & DMA_RX_MASK) == DMA_RX_FSLS)) {
+ u16 length =
+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff)
+ - CRC_LEN;
+ net_receive((void *)rxdsc->buffer_ptr, length);
+ }
+ /* Clean descriptor. now it is owned by DMA. */
+ priv->next_rxdsc = (struct ar231x_descr *)rxdsc->next_dsc_ptr;
+ ar231x_flash_rxdsc(rxdsc);
+ }
+ priv->kill_rx_ring = 0;
+ return 0;
+}
+
+static int ar231x_eth_send(struct eth_device *edev, void *packet,
+ int length)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ struct ar231x_descr *txdsc = priv->tx_ring;
+ u32 rx_missed;
+
+ /* We do not do async work.
+ * If rx_ring is full, there is nothing we can use. */
+ rx_missed = dma_readl(priv, AR231X_DMA_RX_MISSED);
+ if (rx_missed) {
+ priv->kill_rx_ring = 1;
+ ar231x_eth_recv(edev);
+ }
+
+ /* Setup the transmit descriptor. */
+ txdsc->devcs = ((length << DMA_TX1_BSIZE_SHIFT) | DMA_TX1_DEFAULT);
+ txdsc->buffer_ptr = (uint)packet;
+ txdsc->status = DMA_TX_OWN;
+
+ /* Trigger transmission */
+ dma_writel(priv, 0, AR231X_DMA_TX_POLL);
+
+ /* Take enough time to transmit packet. 100 is not enough. */
+ wait_on_timeout(2000 * MSECOND,
+ !(txdsc->status & DMA_TX_OWN));
+
+ /* We can't do match here. If it is still in progress,
+ * then engine is probably stalled or we wait not enough. */
+ if (txdsc->status & DMA_TX_OWN)
+ dev_err(&edev->dev, "Frame is still in progress.\n");
+
+ if (txdsc->status & DMA_TX_ERROR)
+ dev_err(&edev->dev, "Frame was aborted by engine\n");
+
+ /* Ready or not. Stop it. */
+ txdsc->status = 0;
+ return 0;
+}
+
+static void ar231x_eth_halt(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ u32 tmp;
+
+ /* kill the MAC: disable RX and TX */
+ tmp = eth_readl(priv, AR231X_ETH_MAC_CONTROL);
+ eth_writel(priv, tmp & ~(MAC_CONTROL_RE | MAC_CONTROL_TE),
+ AR231X_ETH_MAC_CONTROL);
+
+ /* stop DMA */
+ dma_writel(priv, 0, AR231X_DMA_CONTROL);
+ dma_writel(priv, DMA_BUS_MODE_SWR, AR231X_DMA_BUS_MODE);
+
+ /* place PHY and MAC in reset */
+ ar231x_reset_bit_(priv, (priv->cfg->reset_mac | priv->cfg->reset_phy), SET);
+}
+
+static int ar231x_get_ethaddr(struct eth_device *edev, unsigned char *addr)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+
+ /* MAC address is stored on flash, in some kind of atheros config
+ * area. Platform code should read it and pass to the driver. */
+ memcpy(addr, priv->mac, 6);
+ return 0;
+}
+
+/**
+ * These device do not have build in MAC address.
+ * It is located on atheros-config field on flash.
+ */
+static int ar231x_set_ethaddr(struct eth_device *edev, unsigned char *addr)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+
+ eth_writel(priv,
+ (addr[5] << 8) | (addr[4]),
+ AR231X_ETH_MAC_ADDR1);
+ eth_writel(priv,
+ (addr[3] << 24) | (addr[2] << 16) |
+ (addr[1] << 8) | addr[0],
+ AR231X_ETH_MAC_ADDR2);
+
+ mdelay(10);
+ return 0;
+}
+
+#define MII_ADDR(phy, reg) \
+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
+
+static int ar231x_miibus_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+ struct ar231x_eth_priv *priv = bus->priv;
+ uint64_t time_start;
+
+ phy_writel(priv, MII_ADDR(phy_id, regnum), AR231X_ETH_MII_ADDR);
+ time_start = get_time_ns();
+ while (phy_readl(priv, AR231X_ETH_MII_ADDR) & MII_ADDR_BUSY) {
+ if (is_timeout(time_start, SECOND)) {
+ dev_err(&bus->dev, "miibus read timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+ return phy_readl(priv, AR231X_ETH_MII_DATA) >> MII_DATA_SHIFT;
+}
+
+static int ar231x_miibus_write(struct mii_bus *bus, int phy_id,
+ int regnum, u16 val)
+{
+ struct ar231x_eth_priv *priv = bus->priv;
+ uint64_t time_start = get_time_ns();
+
+ while (phy_readl(priv, AR231X_ETH_MII_ADDR) & MII_ADDR_BUSY) {
+ if (is_timeout(time_start, SECOND)) {
+ dev_err(&bus->dev, "miibus write timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+ phy_writel(priv, val << MII_DATA_SHIFT, AR231X_ETH_MII_DATA);
+ phy_writel(priv, MII_ADDR(phy_id, regnum) | MII_ADDR_WRITE,
+ AR231X_ETH_MII_ADDR);
+ return 0;
+}
+
+static int ar231x_mdiibus_reset(struct mii_bus *bus)
+{
+ struct ar231x_eth_priv *priv = bus->priv;
+
+ ar231x_reset_regs(&priv->edev);
+ return 0;
+}
+
+static int ar231x_eth_probe(struct device_d *dev)
+{
+ struct ar231x_eth_priv *priv;
+ struct eth_device *edev;
+ struct mii_bus *miibus;
+ struct ar231x_eth_platform_data *pdata;
+
+ if (!dev->platform_data) {
+ dev_err(dev, "no platform data\n");
+ return -ENODEV;
+ }
+
+ pdata = dev->platform_data;
+
+ priv = xzalloc(sizeof(struct ar231x_eth_priv));
+ edev = &priv->edev;
+ miibus = &priv->miibus;
+ edev->priv = priv;
+
+ /* link all platform depended regs */
+ priv->mac = pdata->mac;
+
+ priv->eth_regs = dev_request_mem_region(dev, 0);
+ /* we have 0x100000 for eth, part of it are dma regs.
+ * So they are already requested */
+ priv->dma_regs = (void *)(priv->eth_regs + 0x1000);
+
+ priv->phy_regs = dev_request_mem_region(dev, 1);
+
+ priv->cfg = pdata;
+ edev->init = ar231x_eth_init;
+ edev->open = ar231x_eth_open;
+ edev->send = ar231x_eth_send;
+ edev->recv = ar231x_eth_recv;
+ edev->halt = ar231x_eth_halt;
+ edev->get_ethaddr = ar231x_get_ethaddr;
+ edev->set_ethaddr = ar231x_set_ethaddr;
+
+ priv->miibus.read = ar231x_miibus_read;
+ priv->miibus.write = ar231x_miibus_write;
+ priv->miibus.reset = ar231x_mdiibus_reset;
+ priv->miibus.priv = priv;
+ priv->miibus.parent = dev;
+
+ mdiobus_register(miibus);
+ eth_register(edev);
+
+ return 0;
+}
+
+static void ar231x_eth_remove(struct device_d *dev)
+{
+
+}
+
+static struct driver_d ar231x_eth_driver = {
+ .name = "ar231x_eth",
+ .probe = ar231x_eth_probe,
+ .remove = ar231x_eth_remove,
+};
+
+static int ar231x_eth_driver_init(void)
+{
+ return platform_driver_register(&ar231x_eth_driver);
+}
+device_initcall(ar231x_eth_driver_init);
diff --git a/drivers/net/ar231x.h b/drivers/net/ar231x.h
new file mode 100644
index 0000000..2468412
--- /dev/null
+++ b/drivers/net/ar231x.h
@@ -0,0 +1,219 @@
+/*
+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
+ * Based on Linux driver:
+ * Copyright (C) 2004 by Sameer Dekate <sdekate at arubanetworks.com>
+ * Copyright (C) 2006 Imre Kaloz <kaloz at openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd at openwrt.org>
+ * Ported to Barebox:
+ * Copyright (C) 2013 Oleksij Rempel <linux at rempel-privat.de>
+ *
+ * Thanks to Atheros for providing hardware and documentation
+ * enabling me to write this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _AR2313_2_H_
+#define _AR2313_2_H_
+
+#include <net.h>
+#include <mach/ar231x_platform.h>
+
+/* Allocate 64 RX buffers. This will reduce packet loss, until we will start
+ * processing them. It is important in noisy network with lots of broadcasts. */
+#define AR2313_RXDSC_ENTRIES 64
+#define DSC_NEXT(idx) (((idx) + 1) & (AR2313_RXDSC_ENTRIES - 1))
+
+/* Use system default buffers size. At the moment of writing it was 1518 */
+#define AR2313_RX_BUFSIZE PKTSIZE
+#define CRC_LEN 4
+
+/**
+ * DMA controller
+ */
+#define AR231X_DMA_BUS_MODE 0x00 /* (CSR0) */
+#define AR231X_DMA_TX_POLL 0x04 /* (CSR1) */
+#define AR231X_DMA_RX_POLL 0x08 /* (CSR2) */
+#define AR231X_DMA_RX_RING 0x0c /* (CSR3) */
+#define AR231X_DMA_TX_RING 0x10 /* (CSR4) */
+#define AR231X_DMA_STATUS 0x14 /* (CSR5) */
+#define AR231X_DMA_CONTROL 0x18 /* (CSR6) */
+#define AR231X_DMA_INTR_ENA 0x1c /* (CSR7) */
+#define AR231X_DMA_RX_MISSED 0x20 /* (CSR8) */
+/* reserverd 0x24-0x4c (CSR9-19) */
+#define AR231X_DMA_CUR_TX_BUF_ADDR 0x50 /* (CSR20) */
+#define AR231X_DMA_CUR_RX_BUF_ADDR 0x54 /* (CSR21) */
+
+/**
+ * Ethernet controller
+ */
+#define AR231X_ETH_MAC_CONTROL 0x00
+#define AR231X_ETH_MAC_ADDR1 0x04
+#define AR231X_ETH_MAC_ADDR2 0x08
+#define AR231X_ETH_MCAST_TABLE1 0x0c
+#define AR231X_ETH_MCAST_TABLE2 0x10
+#define AR231X_ETH_MII_ADDR 0x14
+#define AR231X_ETH_MII_DATA 0x18
+#define AR231X_ETH_FLOW_CONTROL 0x1c
+#define AR231X_ETH_VLAN_TAG 0x20
+/* pad 0x24 - 0x3c */
+/* ucast_table 0x40-0x5c */
+
+/**
+ * RX descriptor status bits. ar231x_descr.status
+ */
+#define DMA_RX_ERR_CRC BIT(1)
+#define DMA_RX_ERR_DRIB BIT(2)
+#define DMA_RX_ERR_MII BIT(3)
+#define DMA_RX_EV2 BIT(5)
+#define DMA_RX_ERR_COL BIT(6)
+#define DMA_RX_LONG BIT(7)
+#define DMA_RX_LS BIT(8) /* last descriptor */
+#define DMA_RX_FS BIT(9) /* first descriptor */
+#define DMA_RX_MF BIT(10) /* multicast frame */
+#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
+#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
+#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
+#define DMA_RX_ERROR BIT(15) /* error summary */
+#define DMA_RX_LEN_MASK 0x3fff0000
+#define DMA_RX_LEN_SHIFT 16
+#define DMA_RX_FILT BIT(30)
+#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
+#define DMA_RX_FSLS (DMA_RX_LS | DMA_RX_FS)
+#define DMA_RX_MASK (DMA_RX_FSLS | DMA_RX_MF | DMA_RX_ERROR)
+
+/**
+ * RX descriptor configuration bits. ar231x_descr.devcs
+ */
+#define DMA_RX1_BSIZE_MASK 0x000007ff
+#define DMA_RX1_BSIZE_SHIFT 0
+#define DMA_RX1_CHAINED BIT(24)
+#define DMA_RX1_RER BIT(25)
+
+/**
+ * TX descriptor status fields. ar231x_descr.status
+ */
+#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
+#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
+#define DMA_TX_COL_MASK 0x78
+#define DMA_TX_COL_SHIFT 3
+#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
+#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
+#define DMA_TX_ERR_LATE BIT(9) /* late collision */
+#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
+#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
+#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
+#define DMA_TX_ERROR BIT(15) /* frame aborted */
+#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
+
+/**
+ * TX descriptor configuration bits. ar231x_descr.devcs
+ */
+#define DMA_TX1_BSIZE_MASK 0x000007ff
+#define DMA_TX1_BSIZE_SHIFT 0
+#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
+#define DMA_TX1_TER BIT(25) /* transmit end of ring */
+#define DMA_TX1_FS BIT(29) /* first segment */
+#define DMA_TX1_LS BIT(30) /* last segment */
+#define DMA_TX1_IC BIT(31) /* interrupt on completion */
+#define DMA_TX1_DEFAULT (DMA_TX1_FS | DMA_TX1_LS | DMA_TX1_TER)
+
+#define MAC_CONTROL_RE BIT(2) /* receive enable */
+#define MAC_CONTROL_TE BIT(3) /* transmit enable */
+#define MAC_CONTROL_DC BIT(5) /* Deferral check */
+#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
+#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
+#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
+#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
+#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
+#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
+#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
+#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
+#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
+#define MAC_CONTROL_PR BIT(18) /* promiscuous mode
+ * (valid frames only) */
+#define MAC_CONTROL_PM BIT(19) /* pass multicast */
+#define MAC_CONTROL_F BIT(20) /* full-duplex */
+#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
+#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
+#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
+#define MAC_CONTROL_RA BIT(31) /* receive all
+ * (valid and invalid frames) */
+
+#define MII_ADDR_BUSY BIT(0)
+#define MII_ADDR_WRITE BIT(1)
+#define MII_ADDR_REG_SHIFT 6
+#define MII_ADDR_PHY_SHIFT 11
+#define MII_DATA_SHIFT 0
+
+#define FLOW_CONTROL_FCE BIT(1)
+
+#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
+#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
+#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
+
+#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
+#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
+#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
+#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
+#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
+#define DMA_STATUS_RI BIT(6) /* receive interrupt */
+#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
+#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
+#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
+#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
+#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
+#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
+#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
+
+#define DMA_CONTROL_SR BIT(1) /* start receive */
+#define DMA_CONTROL_ST BIT(13) /* start transmit */
+#define DMA_CONTROL_SF BIT(21) /* store and forward */
+
+
+struct ar231x_descr {
+ u32 status; /* OWN, Device control and status. */
+ u32 devcs; /* Packet control bitmap + Length. */
+ u32 buffer_ptr; /* Pointer to packet buffer. */
+ u32 next_dsc_ptr; /* Pointer to next descriptor in chain. */
+};
+
+/**
+ * Struct private for the Sibyte.
+ *
+ * Elements are grouped so variables used by the tx handling goes
+ * together, and will go into the same cache lines etc. in order to
+ * avoid cache line contention between the rx and tx handling on SMP.
+ *
+ * Frequently accessed variables are put at the beginning of the
+ * struct to help the compiler generate better/shorter code.
+ */
+struct ar231x_eth_priv {
+ struct ar231x_eth_platform_data *cfg;
+ u8 *mac;
+ void __iomem *phy_regs;
+ void __iomem *eth_regs;
+ void __iomem *dma_regs;
+ void __iomem *reset_regs;
+
+ struct eth_device edev;
+ struct mii_bus miibus;
+
+ struct ar231x_descr *tx_ring;
+ struct ar231x_descr *rx_ring;
+ struct ar231x_descr *next_rxdsc;
+ u8 kill_rx_ring;
+ void *rx_buffer;
+
+ int oldduplex;
+ void (*reset_bit)(u32 val, enum reset_state state);
+};
+
+#endif /* _AR2313_H_ */
--
1.8.1.2
More information about the barebox
mailing list