[PATCH] arm: ensure the build doesn't fail when kwbimage lacks the binary blob
Baruch Siach
baruch at tkos.co.il
Sun May 12 07:41:16 EDT 2013
Hi Thomas,
On Sun, May 12, 2013 at 01:35:53PM +0200, Thomas Petazzoni wrote:
> mach-mvebu images for Armada 370 and Armada XP SoC require a DDR3
> training code which should be extracted from existing bootable images
> for the relevant board. When such binary blob has not been extracted,
> the build of the .kwb and .kwbuart images will fail. This is annoying
> as it makes the build of all Armada 370/XP defconfig fail, which can
> be a problem for automated builds.
>
> This proposal makes the failure of kwbimage not a fatal failure for
> the build process, and shows a warning. The user therefore sees:
>
> ====================================================================
> KWB barebox.kwb
> Didn't find the file 'plathome-openblocks-ax3-binary.0' in '/home/thomas/projets/barebox' which is mandatory to generate the image
> This file generally contains the DDR3 training code, and should be extracted from an existing bootable
> image for your board. See 'kwbimage -x' to extract it from an existing image.
> Could not create image
> WARNING: Couldn't create KWB image due to previous errors.
> KWBUART barebox.kwbuart
> Didn't find the file 'plathome-openblocks-ax3-binary.0' in '/home/thomas/projets/barebox' which is mandatory to generate the image
> This file generally contains the DDR3 training code, and should be extracted from an existing bootable
> image for your board. See 'kwbimage -x' to extract it from an existing image.
> Could not create image
> WARNING Couldn't create KWB image due to previous errors.
> ====================================================================
>
> The only drawback is that barebox-flash-image, which normally points
> to barebox.kwb, becomes a state symbolic link.
stale?
baruch
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
> ---
> arch/arm/Makefile | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index ce0921d..af8294d 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -270,10 +270,12 @@ KWBIMAGE_OPTS = \
> -c -i $(srctree)/$(BOARD)/kwbimage.cfg -d $(TEXT_BASE) -e $(TEXT_BASE)
>
> quiet_cmd_kwbimage = KWB $@
> - cmd_kwbimage = scripts/kwbimage -p $< $(KWBIMAGE_OPTS) -o $@
> + cmd_kwbimage = scripts/kwbimage -p $< $(KWBIMAGE_OPTS) -o $@ || \
> + echo "WARNING: Couldn't create KWB image due to previous errors."
>
> quiet_cmd_kwbimage_uart = KWBUART $@
> - cmd_kwbimage_uart = scripts/kwbimage -m uart -p $< $(KWBIMAGE_OPTS) -o $@
> + cmd_kwbimage_uart = scripts/kwbimage -m uart -p $< $(KWBIMAGE_OPTS) -o $@ || \
> + echo "WARNING Couldn't create KWB image due to previous errors."
>
> barebox.kwb: $(KBUILD_BINARY) FORCE
> $(call if_changed,kwbimage)
> --
> 1.7.9.5
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
More information about the barebox
mailing list