[PATCH] twl6030: Set WR_S for VMMC

[Sascha Hauer]

On Tue, May 28, 2013 at 01:51:43PM +0200, Jan Weitzel wrote:
> After Reset VMMC goes to default VSEL. This is not a clean power cycle for
> some SD cards.
> Set flag WR_S for VMMC to avoid going to default VSEL.
> 
> Signed-off-by: Jan Weitzel <j.weitzel at phytec.de>

Applied, thanks

Sascha

> ---
>  drivers/mci/twl6030.c |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/mci/twl6030.c b/drivers/mci/twl6030.c
> index 4a875bd..ad1043d 100644
> --- a/drivers/mci/twl6030.c
> +++ b/drivers/mci/twl6030.c
> @@ -21,6 +21,7 @@ static int twl6030_mci_write(u8 address, u8 data)
>  void twl6030_mci_power_init(void)
>  {
>  	twl6030_mci_write(TWL6030_PMCS_VMMC_CFG_VOLTAGE,
> +			TWL6030_VMMC_WR_S | 
>  			TWL6030_VMMC_VSEL_0 | TWL6030_VMMC_VSEL_2 |
>  			TWL6030_VMMC_VSEL_4);
>  	twl6030_mci_write(TWL6030_PMCS_VMMC_CFG_STATE,
> -- 
> 1.7.0.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |