[PATCH 3/5] arm: initial support for Marvell Dove SoCs

[Sebastian Hesselbarth]

On 05/12/2013 06:49 PM, Thomas Petazzoni wrote:
> On Sun, 12 May 2013 15:09:04 +0200, Sebastian Hesselbarth wrote:
>> +static inline void dove_remap_reg_base(uint32_t intbase,
>> +				       uint32_t mcbase)
>> +{
>> +	uint32_t val;
>> +
>> +	/* remap ahb slave base */
>> +	val  = readl(DOVE_CPU_CTRL)&  0xffff0000;
>> +	val |= (mcbase&  0xffff0000)>>  16;
>> +	writel(val, DOVE_CPU_CTRL);
>> +
>> +	/* remap axi bridge address */
>> +	val  = readl(DOVE_AXI_CTRL)&  0x007fffff;
>> +	val |= mcbase&  0xff800000;
>> +	writel(val, DOVE_AXI_CTRL);
>> +
>> +	/* remap memory controller base address */
>> +	val = readl(DOVE_SDRAM_BASE + SDRAM_REGS_BASE_DECODE)&  0x0000ffff;
>> +	val |= mcbase&  0xffff0000;
>> +	writel(val, DOVE_SDRAM_BASE + SDRAM_REGS_BASE_DECODE);
>> +
>> +	/* remap internal register */
>> +	val = intbase&  0xfff00000;
>> +	writel(val, DOVE_BRIDGE_BASE + INT_REGS_BASE_MAP);
>> +}
>
> How does the remapping of the registers plays with the debug_ll code in
> arch/arm/mach-mvebu/include/mach/debug_ll.h, which assumes the UART is
> at 0xd0012000 ?

Thomas, currently it does not play with debug_ll. That's why I don't
remap registers yet. I rather suggest to have a pre-linux boot hook in
barebox to allow to tweak platform specific things before control is
handed over to linux kernel.

Sebastian