January 2023 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Jan 2 01:45:21 PST 2023
Ending: Tue Jan 31 23:35:42 PST 2023
Messages: 591

• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Paolo Abeni
• [PATCH] ARM: dts: meson: align LED node names with dtschema   Neil Armstrong
• [PATCH] arm64: dts: amlogic: align LED node names with dtschema   Neil Armstrong
• [BISECTED] arm64: dts: meson-sm1-odroid-hc4: USB not working   Neil Armstrong
• [PATCH v6 4/8] arm64: dts: Add DT node for the VIPNano-QI on the A311D   Neil Armstrong
• [PATCH] drm/meson: Reduce the FIFO lines held when AFBC is not used   Neil Armstrong
• [PATCH v4 0/2] Make ILI9486 driver working with 16-bits SPI controllers   Neil Armstrong
• (subset) [PATCH v6 0/8] Support for the NPU in Vim3   Neil Armstrong
• (subset) [PATCH v6 0/8] Support for the NPU in Vim3   Neil Armstrong
• (subset) [PATCH v6 0/8] Support for the NPU in Vim3   Neil Armstrong
• [PATCH v1 03/11] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2   Neil Armstrong
• [PATCH v2] Revert "arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0"   Neil Armstrong
• [GIT PULL] amlogic fixes for v6.2-rc   Neil Armstrong
• [PATCH v2] Revert "arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0"   Neil Armstrong
• [PATCH 03/12] dt-bindings: nvmem: convert amlogic-meson-mx-efuse.txt to dt-schema   Neil Armstrong
• [PATCH v2 00/11] dt-bindings: first batch of dt-schema conversions for Amlogic Meson bindings   Neil Armstrong
• [PATCH v2 01/11] dt-bindings: firmware: convert meson_sm.txt to dt-schema   Neil Armstrong
• [PATCH v2 02/11] dt-bindings: nvmem: convert amlogic-efuse.txt to dt-schema   Neil Armstrong
• [PATCH v2 03/11] dt-bindings: nvmem: convert amlogic-meson-mx-efuse.txt to dt-schema   Neil Armstrong
• [PATCH v2 04/11] dt-bindings: watchdog: convert meson-wdt.txt to dt-schema   Neil Armstrong
• [PATCH v2 05/11] dt-bindings: media: convert meson-ir.txt to dt-schema   Neil Armstrong
• [PATCH v2 06/11] dt-bindings: power: amlogic,meson-gx-pwrc: mark bindings as deprecated   Neil Armstrong
• [PATCH v2 07/11] dt-bindings: timer: convert timer/amlogic,meson6-timer.txt to dt-schema   Neil Armstrong
• [PATCH v2 08/11] dt-bindings: phy: convert meson-gxl-usb2-phy.txt to dt-schema   Neil Armstrong
• [PATCH v2 09/11] dt-bindings: mmc: convert amlogic,meson-gx.txt to dt-schema   Neil Armstrong
• [PATCH v2 10/11] dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schema   Neil Armstrong
• [PATCH v2 11/11] dt-bindings: net: convert mdio-mux-meson-g12a.txt to dt-schema   Neil Armstrong
• [RESEND2,v4,2/2] drm/meson: dw-hdmi: Use devm_regulator_*get_enable*()   Neil Armstrong
• [PATCH] drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion   Neil Armstrong
• [PATCH] firmware: meson_sm: stop using 0 as NULL pointer   Neil Armstrong
• [PATCH] drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion   Neil Armstrong
• [PATCH v2 09/11] dt-bindings: mmc: convert amlogic,meson-gx.txt to dt-schema   Neil Armstrong
• (subset) [PATCH v2 00/11] dt-bindings: first batch of dt-schema conversions for Amlogic Meson bindings   Neil Armstrong
• [PATCH] firmware: meson_sm: stop using 0 as NULL pointer   Neil Armstrong
• [PATCH v2 00/11] dt-bindings: first batch of dt-schema conversions for Amlogic Meson bindings   Neil Armstrong
• next-20230110: arm64: defconfig+kselftest config boot failed - Unable to handle kernel paging request at virtual address fffffffffffffff8   Neil Armstrong
• [v3,3/7] drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement   Neil Armstrong
• [PATCH v2 0/6] arm64: dts: small .dts fixes   Neil Armstrong
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Neil Armstrong
• [PATCH resend] MAINTAINERS: add PHY-related files to Amlogic SoC file list   Neil Armstrong
• [PATCH v2 2/9] ARM: dts: amlogic: Used onboard usb hub reset to enable usb hub   Neil Armstrong
• [PATCH v2 3/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2   Neil Armstrong
• [PATCH v2 7/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c4   Neil Armstrong
• [PATCH v2 9/9] arm64: defconfig: Enable USB onboard HUB driver   Neil Armstrong
• [PATCH 1/2] spi: dt-bindings: drop unneeded quotes   Neil Armstrong
• [PATCH 2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex   Neil Armstrong
• [PATCH v1 0/2] ARM: dts: meson: Add more L2 (PL310) cache properties   Neil Armstrong
• [PATCH] arm64: dts: meson: remove CPU opps below 1GHz for G12A boards   Neil Armstrong
• [PATCH 1/2] dt-bindings: mmc: drop unneeded quotes   Neil Armstrong
• [PATCH] ARM: dts: meson8: align OPP table names with DT schema   Neil Armstrong
• [PATCH v3 0/9] Used onboard HUB to reset and add power to hub   Neil Armstrong
• [PATCH] media: meson: vdec: remove redundant if statement   Neil Armstrong
• [PATCH] arm64: dts: meson: add audio playback to S905X-P212 dts   Neil Armstrong
• [PATCH 1/3] arm64: dts: meson: add Broadcom WiFi to P212 dtsi   Neil Armstrong
• [PATCH 2/3] arm64: dts: meson: move pwm_ef node in P212 dtsi   Neil Armstrong
• [PATCH 3/3] arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1   Neil Armstrong
• [PATCH v2 04/11] dt-bindings: watchdog: convert meson-wdt.txt to dt-schema   Neil Armstrong
• [PATCH v2 10/11] dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schema   Neil Armstrong
• [PATCH] media: meson: vdec: esparser: check parsing state with hardware write pointer   Neil Armstrong
• [PATCH v3 0/7] dt-bindings: first batch of dt-schema conversions for Amlogic Meson bindings   Neil Armstrong
• [PATCH v3 1/7] dt-bindings: nvmem: convert amlogic-efuse.txt to dt-schema   Neil Armstrong
• [PATCH v3 2/7] dt-bindings: nvmem: convert amlogic-meson-mx-efuse.txt to dt-schema   Neil Armstrong
• [PATCH v3 3/7] dt-bindings: watchdog: convert meson-wdt.txt to dt-schema   Neil Armstrong
• [PATCH v3 4/7] dt-bindings: media: convert meson-ir.txt to dt-schema   Neil Armstrong
• [PATCH v3 5/7] dt-bindings: timer: convert timer/amlogic,meson6-timer.txt to dt-schema   Neil Armstrong
• [PATCH v3 6/7] dt-bindings: mmc: convert amlogic,meson-gx.txt to dt-schema   Neil Armstrong
• [PATCH v3 7/7] dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schema   Neil Armstrong
• [PATCH 0/3] arm64: meson-g12b: add initial support for Odroid-N2L   Neil Armstrong
• [PATCH 1/3] dt-bindings: arm: amlogic: document Odroid-N2L   Neil Armstrong
• [PATCH 2/3] arm64: dts: meson-g12b: move common node into new odroid.dtsi   Neil Armstrong
• [PATCH 3/3] arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L   Neil Armstrong
• [PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties   Neil Armstrong
• [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's   Neil Armstrong
• [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names   Neil Armstrong
• (subset) [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's   Neil Armstrong
• [PATCH 00/14] arm64: meson: bunch of DT fixes   Neil Armstrong
• [PATCH 01/14] arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name   Neil Armstrong
• [PATCH 02/14] arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node name   Neil Armstrong
• [PATCH 03/14] arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible   Neil Armstrong
• [PATCH 04/14] arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix supply name of USB controller node   Neil Armstrong
• [PATCH 05/14] arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names property   Neil Armstrong
• [PATCH 06/14] arm64: dts: amlogic: meson-gx: add missing unit address to rng node name   Neil Armstrong
• [PATCH 07/14] arm64: dts: amlogic: meson-gxl-s905w-jethome-jethub-j80: fix invalid rtc node name   Neil Armstrong
• [PATCH 08/14] arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: fix invalid rtc node name   Neil Armstrong
• [PATCH 09/14] arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node name   Neil Armstrong
• [PATCH 10/14] arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name   Neil Armstrong
• [PATCH 11/14] arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names   Neil Armstrong
• [PATCH 12/14] arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name   Neil Armstrong
• [PATCH 13/14] arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name   Neil Armstrong
• [PATCH 14/14] arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties   Neil Armstrong
• [PATCH] arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip   Neil Armstrong
• [PATCH v2 1/2] media: meson: vdec: implement 10bit bitstream handling   Neil Armstrong
• [PATCH v2 0/3] arm64: meson-g12b: add initial support for Odroid-N2L   Neil Armstrong
• [PATCH v2 1/3] dt-bindings: arm: amlogic: document Odroid-N2L   Neil Armstrong
• [PATCH v2 2/3] arm64: dts: meson-g12b: move common node into new odroid.dtsi   Neil Armstrong
• [PATCH v2 3/3] arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L   Neil Armstrong
• [PATCH v2] arm64: dts: amlogic: Fix SDIO interrupt and make it level-sensitive   Neil Armstrong
• [PATCH 00/14] arm64: meson: bunch of DT fixes   Neil Armstrong
• [PATCH 0/3] arm64: dts: meson: add WiFi to P212 and cleanup VIM1   Neil Armstrong
• [PATCH] arm64: dts: meson: add audio playback to S905X-P212 dts   Neil Armstrong
• [PATCH] arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip   Neil Armstrong
• [PATCH v2 0/3] arm64: meson-g12b: add initial support for Odroid-N2L   Neil Armstrong
• [PATCH v2 2/3] arm64: dts: make dts use gpio-fan matrix instead of array   Neil Armstrong
• [PATCH v2] power: reset: add Odroid Go Ultra poweroff driver   Neil Armstrong
• [PATCH v2] arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array   Neil Armstrong
• [PATCH v2] arm64: dts: amlogic: Make mmc host controller interrupts level-sensitive   Neil Armstrong
• [PATCH 4/4] arm64: dts: meson: add support for BananaPi M2-Pro   Neil Armstrong
• [PATCH] arm64: dts: meson: radxa-zero: allow usb otg mode   Neil Armstrong
• [PATCH] arm64: dts: meson: radxa-zero: allow usb otg mode   Neil Armstrong
• [PATCH v2 1/5] arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN   Neil Armstrong
• [PATCH v2 2/5] arm64: dts: meson: bananapi-m5: remove redundant status from sound node   Neil Armstrong
• [PATCH v2 3/5] arm64: dts: meson: bananapi-m5: convert dts to dtsi   Neil Armstrong
• [PATCH v2 5/5] arm64: dts: meson: add support for BananaPi M2-Pro   Neil Armstrong
• [PATCH v2 2/2] arm64: dts: meson: add support for Radxa Zero2   Neil Armstrong
• [PATCH v2 0/5] arm64: dts: meson: fix BPI-M5 and add BPI-M2-PRO   Neil Armstrong
• [PATCH v2 1/2] dt-bindings: arm: amlogic: add support for Radxa Zero2   Neil Armstrong
• [PATCH v2] power: reset: add Odroid Go Ultra poweroff driver   Neil Armstrong
• [PATCH 2/2] mmc: meson-gx: support platform interrupt as card detect interrupt   Neil Armstrong
• [GIT PULL] amlogic Drivers updates for v6.3   Neil Armstrong
• [GIT PULL] amlogic ARM64 DT updates for v6.3   Neil Armstrong
• [GIT PULL] amlogic ARM64 DT updates for v6.3   Neil Armstrong
• [GIT PULL] amlogic ARM updates for v6.3   Neil Armstrong
• [v3,3/7] drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement   Dmitry Baryshkov
• next-20230110: arm64: defconfig+kselftest config boot failed - Unable to handle kernel paging request at virtual address fffffffffffffff8   Arnd Bergmann
• [PATCH] watchdog: meson_gxbb: Use devm_clk_get_enabled() helper   Martin Blumenstingl
• [PATCH v2] Revert "arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0"   Martin Blumenstingl
• [PATCH v2 04/11] dt-bindings: watchdog: convert meson-wdt.txt to dt-schema   Martin Blumenstingl
• [PATCH] arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC unit address   Martin Blumenstingl
• [PATCH v2 02/11] dt-bindings: nvmem: convert amlogic-efuse.txt to dt-schema   Martin Blumenstingl
• [PATCH v2 03/11] dt-bindings: nvmem: convert amlogic-meson-mx-efuse.txt to dt-schema   Martin Blumenstingl
• [PATCH v2 0/6] arm64: dts: small .dts fixes   Martin Blumenstingl
• [PATCH v2 1/6] arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node   Martin Blumenstingl
• [PATCH v2 2/6] arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name   Martin Blumenstingl
• [PATCH v2 3/6] arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names   Martin Blumenstingl
• [PATCH v2 4/6] arm64: dts: meson-gx: Fix Ethernet MAC address unit name   Martin Blumenstingl
• [PATCH v2 5/6] arm64: dts: meson-g12a: Fix internal Ethernet PHY unit name   Martin Blumenstingl
• [PATCH v2 6/6] arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address   Martin Blumenstingl
• [PATCH v1 0/2] ARM: dts: meson: Add more L2 (PL310) cache properties   Martin Blumenstingl
• [PATCH v1 1/2] ARM: dts: meson8: Add more L2 (PL310) cache properties   Martin Blumenstingl
• [PATCH v1 2/2] ARM: dts: meson8b: Add more L2 (PL310) cache properties   Martin Blumenstingl
• [PATCH v2] dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation   Martin Blumenstingl
• [PATCH v2] dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation   Martin Blumenstingl
• [PATCH v2] arm64: dts: amlogic: Make mmc host controller interrupts level-sensitive   Vyacheslav Bocharov
• [PATCH v1 0/4] clk: meson: switch from .round_rate to .determine_rate   Stephen Boyd
• next-20230110: arm64: defconfig+kselftest config boot failed - Unable to handle kernel paging request at virtual address fffffffffffffff8   Mark Brown
• next-20230110: arm64: defconfig+kselftest config boot failed - Unable to handle kernel paging request at virtual address fffffffffffffff8   Mark Brown
• [PATCH v2 1/2] spi: dt-bindings: drop unneeded quotes   Mark Brown
• [PATCH v1 0/4] clk: meson: switch from .round_rate to .determine_rate   Jerome Brunet
• [PATCH net-next 0/2] net: mdio: add amlogic gxl mdio mux support   Jerome Brunet
• [PATCH net-next 1/2] dt-bindings: net: add amlogic gxl mdio multiplexer   Jerome Brunet
• [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Jerome Brunet
• [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Jerome Brunet
• [PATCH net-next 1/2] dt-bindings: net: add amlogic gxl mdio multiplexer   Jerome Brunet
• [PATCH net-next 0/2] net: mdio: add amlogic gxl mdio mux support   Jerome Brunet
• [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Jerome Brunet
• [PATCH V6 0/3] Add S4 SoC PLL and Peripheral clock controller   Jerome Brunet
• [PATCH V6 2/3] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver   Jerome Brunet
• [PATCH V6 3/3] clk: meson: s4: add support for Amlogic S4 SoC peripheral clock controller   Jerome Brunet
• [PATCH V6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller   Jerome Brunet
• [PATCH V6 2/3] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver   Jerome Brunet
• [PATCH V6 3/3] clk: meson: s4: add support for Amlogic S4 SoC peripheral clock controller   Jerome Brunet
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Jerome Brunet
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Jerome Brunet
• [PATCH net-next] net: mdio: mux-meson-g12a: use devm_clk_get_enabled to simplify the code   Jerome Brunet
• [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Jerome Brunet
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Jerome Brunet
• [PATCH net] net: mdio-mux-meson-g12a: force internal PHY off on mux switch   Jerome Brunet
• [PATCH v2 15/25] ASoC: meson: use helper function   Jerome Brunet
• [PATCH v2 net] net: mdio-mux-meson-g12a: force internal PHY off on mux switch   Jerome Brunet
• [PATCH v2] arm64: dts: amlogic: Make mmc host controller interrupts level-sensitive   Jerome Brunet
• [PATCH v2] arm64: dts: amlogic: Make mmc host controller interrupts level-sensitive   Jerome Brunet
• [PATCH V6 3/3] clk: meson: s4: add support for Amlogic S4 SoC peripheral clock controller   Jerome Brunet
• [PATCH V6 3/3] clk: meson: s4: add support for Amlogic S4 SoC peripheral clock controller   Jerome Brunet
• [PATCH V6 3/3] clk: meson: s4: add support for Amlogic S4 SoC peripheral clock controller   Jerome Brunet
• [PATCH v2 net-next 0/2] net: mdio: add amlogic gxl mdio mux support   Jerome Brunet
• [PATCH v2 net-next 1/2] dt-bindings: net: add amlogic gxl mdio multiplexer   Jerome Brunet
• [PATCH v2 net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Jerome Brunet
• [PATCH v3] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Jerome Brunet
• [PATCH v3] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Jerome Brunet
• [PATCH 1/2] spi: dt-bindings: drop unneeded quotes   Patrice CHOTARD
• [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call   Patrice CHOTARD
• [PATCH v2 04/13] iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call   Jonathan Cameron
• [PATCH] media: meson: vdec: esparser: check parsing state with hardware write pointer   Dan Carpenter
• [PATCH] firmware: meson_sm: stop using 0 as NULL pointer   Miles Chen
• [PATCH v2 1/2] media: meson: vdec: implement 10bit bitstream handling   Nicolas Dufresne
• [PATCH v2 1/2] media: meson: vdec: implement 10bit bitstream handling   Nicolas Dufresne
• [PATCH v2 1/2] media: meson: vdec: implement 10bit bitstream handling   Nicolas Dufresne
• [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call   Cédric Le Goater
• [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call   Dhruva Gole
• [PATCH v2 resend] media: meson: vdec: Add MODULE_FIRMWARE macro   Juerg Haefliger
• [PATCH 1/2] dt-bindings: mmc: drop unneeded quotes   Ulf Hansson
• [PATCH 2/2] dt-bindings: mmc: correct pwrseq node names   Ulf Hansson
• [PATCH v3 6/7] dt-bindings: mmc: convert amlogic,meson-gx.txt to dt-schema   Ulf Hansson
• [PATCH 1/1] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Chris Healy
• [PATCH 1/1] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Chris Healy
• [PATCH 1/1] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Chris Healy
• [PATCH v2] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Chris Healy
• [PATCH v3] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Chris Healy
• [PATCH net] net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHY   Chris Healy
• [PATCH v2 13/23] arm64: dts: Update cache properties for microchip   Steen Hegelund
• [PATCH v2] arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array   David Heidelberg
• [PATCH v2 10/11] dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schema   Bjorn Helgaas
• [PATCH] dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation   Rob Herring
• [PATCH] dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation   Rob Herring
• [PATCH 1/2] spi: dt-bindings: drop unneeded quotes   Rob Herring
• [PATCH 2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex   Rob Herring
• [PATCH 1/2] dt-bindings: mmc: drop unneeded quotes   Rob Herring
• [PATCH 2/2] dt-bindings: mmc: correct pwrseq node names   Rob Herring
• [PATCH 11/13] dt-bindings: serial: restrict possible child node names   Rob Herring
• [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding   Rob Herring
• [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding   Rob Herring
• [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding   Rob Herring
• [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding   Rob Herring
• [PATCH 11/13] dt-bindings: serial: restrict possible child node names   Rob Herring
• [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding   Rob Herring
• [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding   Rob Herring
• [PATCH v2 2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex   Rob Herring
• [PATCH v2 01/12] dt-bindings: serial: amlogic,meson-uart: allow other serial properties   Rob Herring
• [PATCH v2 02/12] dt-bindings: serial: 8250: correct Nuvoton NPCM850 compatible   Rob Herring
• [PATCH v2 03/12] dt-bindings: serial: pl011: allow ARM Primecell properties   Rob Herring
• [PATCH v2 04/12] dt-bindings: serial: correct ref to serial.yaml   Rob Herring
• [PATCH v2 05/12] dt-bindings: serial: cdsn,uart: add power-domains   Rob Herring
• [PATCH v2 06/12] dt-bindings: serial: 8250_omap: drop rs485 properties   Rob Herring
• [PATCH v2 07/12] dt-bindings: serial: fsl-imx-uart: drop common properties   Rob Herring
• [PATCH v2 08/12] dt-bindings: serial: fsl-lpuart: drop rs485 properties   Rob Herring
• [PATCH v2 09/12] dt-bindings: serial: fsl-lpuart: allow other serial properties   Rob Herring
• [PATCH v2 10/12] dt-bindings: serial: st,stm32-uart: drop common properties   Rob Herring
• [PATCH v2 11/12] dt-bindings: serial: drop unneeded quotes   Rob Herring
• [PATCH v2 12/12] dt-bindings: serial: example cleanup   Rob Herring
• [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding   Rob Herring
• [PATCH v2] dt-bindings: pwm: Convert Amlogic Meson PWM binding   Rob Herring
• [PATCH v3] dt-bindings: pwm: Convert Amlogic Meson PWM binding   Rob Herring
• [PATCH v3] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding   Rob Herring
• [PATCH v3] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding   Rob Herring
• [PATCH] arm64: dts: meson: remove CPU opps below 1GHz for G12A boards   Christian Hewitt
• [PATCH 0/3] arm64: dts: meson: add WiFi to P212 and cleanup VIM1   Christian Hewitt
• [PATCH 1/3] arm64: dts: meson: add Broadcom WiFi to P212 dtsi   Christian Hewitt
• [PATCH 2/3] arm64: dts: meson: move pwm_ef node in P212 dtsi   Christian Hewitt
• [PATCH 3/3] arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1   Christian Hewitt
• [PATCH] arm64: dts: meson: add audio playback to S905X-P212 dts   Christian Hewitt
• [PATCH] media: meson: vdec: remove redundant if statement   Christian Hewitt
• [PATCH] media: meson: vdec: esparser: check parsing state with hardware write pointer   Christian Hewitt
• [PATCH 0/2] media: meson: vdec: add HEVC decode codec   Christian Hewitt
• [PATCH 1/2] media: meson: vdec: implement 10bit bitstream handling   Christian Hewitt
• [PATCH 2/2] media: meson: vdec: add HEVC decode codec   Christian Hewitt
• [PATCH v2 0/2] media: meson: vdec: add HEVC decode codec   Christian Hewitt
• [PATCH v2 1/2] media: meson: vdec: implement 10bit bitstream handling   Christian Hewitt
• [PATCH v2 2/2] media: meson: vdec: add HEVC decode codec   Christian Hewitt
• [PATCH 0/4] arm64: dts: meson: fix BPI-M5 and add BPI-M2-PRO   Christian Hewitt
• [PATCH 1/4] arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN   Christian Hewitt
• [PATCH 2/4] arm64: dts: meson: meson-sm1-bananapi-m5: convert to dtsi   Christian Hewitt
• [PATCH 3/4] dt-bindings: arm: amlogic: add support for BananaPi M2-Pro   Christian Hewitt
• [PATCH 4/4] arm64: dts: meson: add support for BananaPi M2-Pro   Christian Hewitt
• [PATCH 4/4] arm64: dts: meson: add support for BananaPi M2-Pro   Christian Hewitt
• [PATCH] arm64: dts: meson: radxa-zero: allow usb otg mode   Christian Hewitt
• [PATCH 1/2] dt-bindings: arm: amlogic: add support for Radxa Zero2   Christian Hewitt
• [PATCH 2/2] arm64: dts: meson: add support for Radxa Zero2   Christian Hewitt
• [PATCH v2 0/5] arm64: dts: meson: fix BPI-M5 and add BPI-M2-PRO   Christian Hewitt
• [PATCH v2 1/5] arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN   Christian Hewitt
• [PATCH v2 2/5] arm64: dts: meson: bananapi-m5: remove redundant status from sound node   Christian Hewitt
• [PATCH v2 3/5] arm64: dts: meson: bananapi-m5: convert dts to dtsi   Christian Hewitt
• [PATCH v2 4/5] dt-bindings: arm: amlogic: add support for BananaPi M2-Pro   Christian Hewitt
• [PATCH v2 5/5] arm64: dts: meson: add support for BananaPi M2-Pro   Christian Hewitt
• [PATCH 4/4] arm64: dts: meson: add support for BananaPi M2-Pro   Christian Hewitt
• [PATCH v2 1/2] dt-bindings: arm: amlogic: add support for Radxa Zero2   Christian Hewitt
• [PATCH v2 2/2] arm64: dts: meson: add support for Radxa Zero2   Christian Hewitt
• [PATCH V6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller   Kevin Hilman
• [PATCH V6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller   Kevin Hilman
• [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Simon Horman
• [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Simon Horman
• [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Simon Horman
• [PATCH 2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex   Andrew Jeffery
• [PATCH 1/2] spi: dt-bindings: drop unneeded quotes   Andrew Jeffery
• [PATCH v2 06/13] staging: Replace all spi->chip_select and spi->cs_gpiod references with function call   Greg KH
• [PATCH v1 10/11] usb: misc: onboard_usb_hub: add VIA LAB VL817Q7 hub support   Matthias Kaehlcke
• [PATCH v1 05/11] usb: misc: onboard_usb_hub: add Genesys Logic GL852G-OHG hub support   Matthias Kaehlcke
• [PATCH v1 06/11] usb: misc: onboard_usb_hub: add Genesys Logic GL3523-QFN76 hub support   Matthias Kaehlcke
• [PATCH v1 05/11] usb: misc: onboard_usb_hub: add Genesys Logic GL852G-OHG hub support   Matthias Kaehlcke
• [PATCH v1 08/11] dt-bindings: usb: Add binding for Via lab VL817Q7 hub controller   Matthias Kaehlcke
• [PATCH v1 01/11] dt-bindings: usb: Add device id for Genesys Logic hub controller   Matthias Kaehlcke
• [PATCH v1 06/11] usb: misc: onboard_usb_hub: add Genesys Logic GL3523-QFN76 hub support   Matthias Kaehlcke
• [PATCH v1 01/11] dt-bindings: usb: Add device id for Genesys Logic hub controller   Matthias Kaehlcke
• [PATCH v2 4/9] usb: misc: onboard_usb_hub: add Genesys Logic GL852G hub support   Matthias Kaehlcke
• [PATCH v2 8/9] usb: misc: onboard_usb_hub: add VIA LAB VL817 hub support   Matthias Kaehlcke
• [PATCH v3] mmc: meson-gx: fix SDIO interrupt handling   Heiner Kallweit
• [PATCH] MAINTAINERS: add PHY-related files to Amlogic SoC file list   Heiner Kallweit
• [PATCH] dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation   Heiner Kallweit
• [PATCH] dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation   Heiner Kallweit
• [PATCH resend] MAINTAINERS: add PHY-related files to Amlogic SoC file list   Heiner Kallweit
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Heiner Kallweit
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Heiner Kallweit
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Heiner Kallweit
• [PATCH v2] dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation   Heiner Kallweit
• [PATCH v2] dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation   Heiner Kallweit
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Heiner Kallweit
• [PATCH v3] mmc: meson-gx: fix SDIO interrupt handling   Heiner Kallweit
• [PATCH v3] mmc: meson-gx: fix SDIO interrupt handling   Heiner Kallweit
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Heiner Kallweit
• [PATCH net-next] net: mdio: mux-meson-g12a: use devm_clk_get_enabled to simplify the code   Heiner Kallweit
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Heiner Kallweit
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Heiner Kallweit
• [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's   Heiner Kallweit
• [PATCH 1/8] arm64: dts: meson-gx: Remove invalid pwm compatible   Heiner Kallweit
• [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names   Heiner Kallweit
• [PATCH 3/8] arm64: dts: meson-gx: Set only one compatible string for mmc   Heiner Kallweit
• [PATCH 4/8] arm64: dts: amlogic: Remove invalid compatible string amlogic,meson-gpio-intc   Heiner Kallweit
• [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding   Heiner Kallweit
• [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding   Heiner Kallweit
• [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding   Heiner Kallweit
• [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding   Heiner Kallweit
• [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding   Heiner Kallweit
• [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding   Heiner Kallweit
• [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's   Heiner Kallweit
• [PATCH] arm64: dts: amlogic: Fix SDIO interrupt and make it level-sensitive   Heiner Kallweit
• [PATCH v2] arm64: dts: amlogic: Fix SDIO interrupt and make it level-sensitive   Heiner Kallweit
• [PATCH v2] arm64: dts: amlogic: Fix SDIO interrupt and make it level-sensitive   Heiner Kallweit
• [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding   Heiner Kallweit
• [PATCH v2] dt-bindings: pwm: Convert Amlogic Meson PWM binding   Heiner Kallweit
• [PATCH v2] arm64: dts: amlogic: Fix SDIO interrupt and make it level-sensitive   Heiner Kallweit
• [PATCH v2] arm64: dts: amlogic: Make mmc host controller interrupts level-sensitive   Heiner Kallweit
• [PATCH net-next] net: mdio: mux-meson-g12a: use __clk_is_enabled to simplify the code   Heiner Kallweit
• [PATCH v2] arm64: dts: amlogic: Make mmc host controller interrupts level-sensitive   Heiner Kallweit
• [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding   Heiner Kallweit
• [PATCH v2] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding   Heiner Kallweit
• [PATCH 1/1] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Heiner Kallweit
• [PATCH 0/2] mmc: meson-gx: support platform interrupt as card detect interrupt   Heiner Kallweit
• [PATCH 1/2] mmc: core: support platform interrupt as card detect interrupt   Heiner Kallweit
• [PATCH 2/2] mmc: meson-gx: support platform interrupt as card detect interrupt   Heiner Kallweit
• [PATCH 2/2] mmc: meson-gx: support platform interrupt as card detect interrupt   Heiner Kallweit
• [PATCH v2] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Heiner Kallweit
• [PATCH v3] dt-bindings: pwm: Convert Amlogic Meson PWM binding   Heiner Kallweit
• [PATCH v3] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding   Heiner Kallweit
• [PATCH v3] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding   Heiner Kallweit
• [PATCH v3] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Heiner Kallweit
• [PATCH v3] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Heiner Kallweit
• [PATCH net] net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHY   Heiner Kallweit
• [PATCH v3] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding   Heiner Kallweit
• [PATCH v2 00/11] dt-bindings: first batch of dt-schema conversions for Amlogic Meson bindings   Jakub Kicinski
• [PATCH net-next] net: mdio: mux-meson-g12a: use __clk_is_enabled to simplify the code   Jakub Kicinski
• [PATCH net] net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHY   Jakub Kicinski
• [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's   Uwe Kleine-König
• [PATCH v2 08/11] dt-bindings: phy: convert meson-gxl-usb2-phy.txt to dt-schema   Vinod Koul
• [PATCH v2] dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation   Vinod Koul
• [PATCH v2] dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation   Vinod Koul
• [PATCH v2 01/11] dt-bindings: firmware: convert meson_sm.txt to dt-schema   Krzysztof Kozlowski
• [PATCH v2 02/11] dt-bindings: nvmem: convert amlogic-efuse.txt to dt-schema   Krzysztof Kozlowski
• [PATCH v2 03/11] dt-bindings: nvmem: convert amlogic-meson-mx-efuse.txt to dt-schema   Krzysztof Kozlowski
• [PATCH v2 06/11] dt-bindings: power: amlogic,meson-gx-pwrc: mark bindings as deprecated   Krzysztof Kozlowski
• [PATCH v2 09/11] dt-bindings: mmc: convert amlogic,meson-gx.txt to dt-schema   Krzysztof Kozlowski
• [PATCH v2 09/11] dt-bindings: mmc: convert amlogic,meson-gx.txt to dt-schema   Krzysztof Kozlowski
• [PATCH] arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC unit address   Krzysztof Kozlowski
• [PATCH] arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC unit address   Krzysztof Kozlowski
• [PATCH v4 0/9] media: dt-bindings: common CEC properties   Krzysztof Kozlowski
• [PATCH] dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation   Krzysztof Kozlowski
• [PATCH] dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation   Krzysztof Kozlowski
• [PATCH V6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller   Krzysztof Kozlowski
• [PATCH] dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation   Krzysztof Kozlowski
• [PATCH net-next 1/2] dt-bindings: net: add amlogic gxl mdio multiplexer   Krzysztof Kozlowski
• [PATCH net-next 1/2] dt-bindings: net: add amlogic gxl mdio multiplexer   Krzysztof Kozlowski
• [PATCH v2] dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentation   Krzysztof Kozlowski
• [PATCH v2] dt-bindings: phy: g12a-usb2-phy: fix compatible string documentation   Krzysztof Kozlowski
• [PATCH v2 1/9] dt-bindings: usb: Add device id for Genesys Logic hub controller   Krzysztof Kozlowski
• [PATCH v2 6/9] dt-bindings: usb: Add binding for Via lab VL817 hub controller   Krzysztof Kozlowski
• [PATCH 1/2] spi: dt-bindings: drop unneeded quotes   Krzysztof Kozlowski
• [PATCH 2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex   Krzysztof Kozlowski
• [PATCH] ARM: dts: meson8: align OPP table names with DT schema   Krzysztof Kozlowski
• [PATCH 1/2] dt-bindings: mmc: drop unneeded quotes   Krzysztof Kozlowski
• [PATCH 2/2] dt-bindings: mmc: correct pwrseq node names   Krzysztof Kozlowski
• [PATCH v3 5/9] vendor-prefixes: Add VIA Labs, Inc.   Krzysztof Kozlowski
• [PATCH v3 6/9] dt-bindings: usb: Add Via lab VL817 hub   Krzysztof Kozlowski
• [PATCH v3 5/9] vendor-prefixes: Add VIA Labs, Inc.   Krzysztof Kozlowski
• [PATCH 01/13] dt-bindings: serial: amlogic,meson-uart: allow other serial properties   Krzysztof Kozlowski
• [PATCH 02/13] dt-bindings: serial: 8250: correct Nuvoton NPCM850 compatible   Krzysztof Kozlowski
• [PATCH 03/13] dt-bindings: serial: pl011: allow ARM Primecell properties   Krzysztof Kozlowski
• [PATCH 04/13] dt-bindings: serial: correct ref to serial.yaml   Krzysztof Kozlowski
• [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains   Krzysztof Kozlowski
• [PATCH 06/13] dt-bindings: serial: 8250_omap: drop rs485 properties   Krzysztof Kozlowski
• [PATCH 07/13] dt-bindings: serial: fsl-imx-uart: drop common properties   Krzysztof Kozlowski
• [PATCH 08/13] dt-bindings: serial: fsl-lpuart: drop rs485 properties   Krzysztof Kozlowski
• [PATCH 09/13] dt-bindings: serial: fsl-lpuart: allow other serial properties   Krzysztof Kozlowski
• [PATCH 10/13] dt-bindings: serial: st,stm32-uart: drop common properties   Krzysztof Kozlowski
• [PATCH 11/13] dt-bindings: serial: restrict possible child node names   Krzysztof Kozlowski
• [PATCH 12/13] dt-bindings: serial: drop unneeded quotes   Krzysztof Kozlowski
• [PATCH 13/13] dt-bindings: serial: example cleanup   Krzysztof Kozlowski
• [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains   Krzysztof Kozlowski
• [PATCH 1/3] dt-bindings: arm: amlogic: document Odroid-N2L   Krzysztof Kozlowski
• [PATCH v3 2/7] dt-bindings: nvmem: convert amlogic-meson-mx-efuse.txt to dt-schema   Krzysztof Kozlowski
• [PATCH v3 6/7] dt-bindings: mmc: convert amlogic,meson-gx.txt to dt-schema   Krzysztof Kozlowski
• [PATCH 11/13] dt-bindings: serial: restrict possible child node names   Krzysztof Kozlowski
• [PATCH 2/2] dt-bindings: mmc: correct pwrseq node names   Krzysztof Kozlowski
• [PATCH 2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex   Krzysztof Kozlowski
• [PATCH v2 1/2] spi: dt-bindings: drop unneeded quotes   Krzysztof Kozlowski
• [PATCH v2 2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex   Krzysztof Kozlowski
• [PATCH 11/13] dt-bindings: serial: restrict possible child node names   Krzysztof Kozlowski
• [PATCH v2 00/12] dt-bindings: serial: cleanup and improvements   Krzysztof Kozlowski
• [PATCH v2 01/12] dt-bindings: serial: amlogic,meson-uart: allow other serial properties   Krzysztof Kozlowski
• [PATCH v2 02/12] dt-bindings: serial: 8250: correct Nuvoton NPCM850 compatible   Krzysztof Kozlowski
• [PATCH v2 03/12] dt-bindings: serial: pl011: allow ARM Primecell properties   Krzysztof Kozlowski
• [PATCH v2 04/12] dt-bindings: serial: correct ref to serial.yaml   Krzysztof Kozlowski
• [PATCH v2 05/12] dt-bindings: serial: cdsn,uart: add power-domains   Krzysztof Kozlowski
• [PATCH v2 06/12] dt-bindings: serial: 8250_omap: drop rs485 properties   Krzysztof Kozlowski
• [PATCH v2 07/12] dt-bindings: serial: fsl-imx-uart: drop common properties   Krzysztof Kozlowski
• [PATCH v2 08/12] dt-bindings: serial: fsl-lpuart: drop rs485 properties   Krzysztof Kozlowski
• [PATCH v2 09/12] dt-bindings: serial: fsl-lpuart: allow other serial properties   Krzysztof Kozlowski
• [PATCH v2 10/12] dt-bindings: serial: st,stm32-uart: drop common properties   Krzysztof Kozlowski
• [PATCH v2 11/12] dt-bindings: serial: drop unneeded quotes   Krzysztof Kozlowski
• [PATCH v2 12/12] dt-bindings: serial: example cleanup   Krzysztof Kozlowski
• [PATCH linux-next v4 4/4] dt-bindings: usb: Fix device tree binding for VL817 hub controller   Krzysztof Kozlowski
• [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller   Krzysztof Kozlowski
• [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller   Krzysztof Kozlowski
• [PATCH RESEND linux-next v4.1 4/4] dt-bindings: usb: Fix properties for VL817 hub controller   Krzysztof Kozlowski
• [PATCH v4 0/9] media: dt-bindings: common CEC properties   Krzysztof Kozlowski
• [PATCH 3/4] dt-bindings: arm: amlogic: add support for BananaPi M2-Pro   Krzysztof Kozlowski
• [PATCH 4/4] arm64: dts: meson: add support for BananaPi M2-Pro   Krzysztof Kozlowski
• [PATCH 1/2] dt-bindings: arm: amlogic: add support for Radxa Zero2   Krzysztof Kozlowski
• [PATCH 2/2] arm64: dts: meson: add support for Radxa Zero2   Krzysztof Kozlowski
• [PATCH 4/4] arm64: dts: meson: add support for BananaPi M2-Pro   Krzysztof Kozlowski
• [PATCH v3] dt-bindings: pwm: Convert Amlogic Meson PWM binding   Krzysztof Kozlowski
• [PATCH v3 1/9] dt-bindings: usb: Add device id for Genesys Logic hub controller   Greg Kroah-Hartman
• [PATCH RESEND linux-next v4.1 0/4] Used onboard HUB to reset and add power to hub   Greg Kroah-Hartman
• [PATCH v2 02/23] arm64: dts: Update cache properties for amd   Tom Lendacky
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Andrew Lunn
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Andrew Lunn
• [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Andrew Lunn
• [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Andrew Lunn
• [PATCH net-next 0/2] net: mdio: add amlogic gxl mdio mux support   Andrew Lunn
• [PATCH net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Andrew Lunn
• [PATCH net-next 0/2] net: mdio: add amlogic gxl mdio mux support   Andrew Lunn
• [PATCH net] net: mdio-mux-meson-g12a: force internal PHY off on mux switch   Andrew Lunn
• [PATCH 1/1] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Andrew Lunn
• [PATCH 1/1] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   Andrew Lunn
• [PATCH v2 net-next 2/2] net: mdio: add amlogic gxl mdio mux support   Andrew Lunn
• [PATCH v2 00/13] spi: Add support for stacked/parallel memories   Amit Kumar Mahapatra
• [PATCH v2 01/13] spi: Add APIs in spi core to set/get spi->chip_select and spi->cs_gpiod   Amit Kumar Mahapatra
• [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call   Amit Kumar Mahapatra
• [PATCH v2 03/13] net: Replace all spi->chip_select and spi->cs_gpiod references with function call   Amit Kumar Mahapatra
• [PATCH v2 04/13] iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call   Amit Kumar Mahapatra
• [PATCH v2 05/13] mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call   Amit Kumar Mahapatra
• [PATCH v2 06/13] staging: Replace all spi->chip_select and spi->cs_gpiod references with function call   Amit Kumar Mahapatra
• [PATCH v2 07/13] platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call   Amit Kumar Mahapatra
• [PATCH v2 08/13] spi: Add stacked and parallel memories support in SPI core   Amit Kumar Mahapatra
• [PATCH v2 09/13] mtd: spi-nor: Add APIs to set/get nor->params   Amit Kumar Mahapatra
• [PATCH v2 10/13] mtd: spi-nor: Add stacked memories support in spi-nor   Amit Kumar Mahapatra
• [PATCH v2 11/13] spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver   Amit Kumar Mahapatra
• [PATCH v2 12/13] mtd: spi-nor: Add parallel memories support in spi-nor   Amit Kumar Mahapatra
• [PATCH v2 13/13] spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver   Amit Kumar Mahapatra
• [PATCH] Revert "arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0"   Pierre-Olivier Mercier
• [PATCH v2] Revert "arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0"   Pierre-Olivier Mercier
• [PATCH v1 03/11] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2   Anand Moon
• [PATCH v1 03/11] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2   Anand Moon
• [PATCH v1 03/11] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2   Anand Moon
• [PATCH v1 05/11] usb: misc: onboard_usb_hub: add Genesys Logic GL852G-OHG hub support   Anand Moon
• [PATCH v1 06/11] usb: misc: onboard_usb_hub: add Genesys Logic GL3523-QFN76 hub support   Anand Moon
• [PATCH v1 10/11] usb: misc: onboard_usb_hub: add VIA LAB VL817Q7 hub support   Anand Moon
• [PATCH v1 02/11] ARM: dts: amlogic: Used onboard usb hub reset to enable usb hub   Anand Moon
• [PATCH v1 08/11] dt-bindings: usb: Add binding for Via lab VL817Q7 hub controller   Anand Moon
• [PATCH v1 01/11] dt-bindings: usb: Add device id for Genesys Logic hub controller   Anand Moon
• [PATCH v1 01/11] dt-bindings: usb: Add device id for Genesys Logic hub controller   Anand Moon
• [PATCH net-next] net: phy: meson-gxl: support more G12A-internal PHY versions   Anand Moon
• [PATCH v2 0/9] Used onboard HUB to reset and add power to hub   Anand Moon
• [PATCH v2 1/9] dt-bindings: usb: Add device id for Genesys Logic hub controller   Anand Moon
• [PATCH v2 2/9] ARM: dts: amlogic: Used onboard usb hub reset to enable usb hub   Anand Moon
• [PATCH v2 3/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2   Anand Moon
• [PATCH v2 4/9] usb: misc: onboard_usb_hub: add Genesys Logic GL852G hub support   Anand Moon
• [PATCH v2 5/9] vendor-prefixes: Add VIA Labs, Inc.   Anand Moon
• [PATCH v2 6/9] dt-bindings: usb: Add binding for Via lab VL817 hub controller   Anand Moon
• [PATCH v2 7/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c4   Anand Moon
• [PATCH v2 8/9] usb: misc: onboard_usb_hub: add VIA LAB VL817 hub support   Anand Moon
• [PATCH v2 9/9] arm64: defconfig: Enable USB onboard HUB driver   Anand Moon
• [PATCH v2 7/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c4   Anand Moon
• [PATCH v2 6/9] dt-bindings: usb: Add binding for Via lab VL817 hub controller   Anand Moon
• [PATCH v2 7/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c4   Anand Moon
• [PATCH v3 0/9] Used onboard HUB to reset and add power to hub   Anand Moon
• [PATCH v3 1/9] dt-bindings: usb: Add device id for Genesys Logic hub controller   Anand Moon
• [PATCH v3 2/9] ARM: dts: amlogic: Used onboard usb hub reset on odroid c1   Anand Moon
• [PATCH v3 3/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2   Anand Moon
• [PATCH v3 4/9] usb: misc: onboard_usb_hub: add Genesys Logic GL852G hub support   Anand Moon
• [PATCH v3 5/9] vendor-prefixes: Add VIA Labs, Inc.   Anand Moon
• [PATCH v3 6/9] dt-bindings: usb: Add Via lab VL817 hub   Anand Moon
• [PATCH v3 7/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c4   Anand Moon
• [PATCH v3 8/9] usb: misc: onboard_usb_hub: add VIA LAB VL817 hub support   Anand Moon
• [PATCH v3 9/9] arm64: defconfig: Enable USB onboard HUB driver   Anand Moon
• [PATCH v3 5/9] vendor-prefixes: Add VIA Labs, Inc.   Anand Moon
• [PATCH v3 0/9] Used onboard HUB to reset and add power to hub   Anand Moon
• [PATCH v3 5/9] vendor-prefixes: Add VIA Labs, Inc.   Anand Moon
• [PATCH linux-next v4 0/4] Used onboard HUB to reset and add power to hub   Anand Moon
• [PATCH linux-next v4 1/4] ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1   Anand Moon
• [PATCH linux-next v4 2/4] arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2   Anand Moon
• [PATCH linux-next v4 3/4] arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4   Anand Moon
• [PATCH linux-next v4 4/4] dt-bindings: usb: Fix device tree binding for VL817 hub controller   Anand Moon
• [PATCH RESEND linux-next v4 0/4] Used onboard HUB to reset and add power to hub   Anand Moon
• [PATCH RESEND linux-next v4 1/4] ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1   Anand Moon
• [PATCH RESEND linux-next v4 2/4] arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2   Anand Moon
• [PATCH RESEND linux-next v4 3/4] arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4   Anand Moon
• [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller   Anand Moon
• [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller   Anand Moon
• [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller   Anand Moon
• [PATCH RESEND linux-next v4.1 0/4] Used onboard HUB to reset and add power to hub   Anand Moon
• [PATCH RESEND linux-next v4.1 1/4] ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1   Anand Moon
• [PATCH RESEND linux-next v4.1 2/4] arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2   Anand Moon
• [PATCH RESEND linux-next v4.1 3/4] arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4   Anand Moon
• [PATCH RESEND linux-next v4.1 4/4] dt-bindings: usb: Fix properties for VL817 hub controller   Anand Moon
• [PATCH v3 1/9] dt-bindings: usb: Add device id for Genesys Logic hub controller   Anand Moon
• [PATCH RESEND linux-next v4.1 0/4] Used onboard HUB to reset and add power to hub   Anand Moon
• [PATCH linux-next v5 0/4] Used onboard HUB to reset and add power to hub   Anand Moon
• [PATCH linux-next v5 1/4] ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1   Anand Moon
• [PATCH linux-next v5 2/4] arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2   Anand Moon
• [PATCH linux-next v5 3/4] arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4   Anand Moon
• [PATCH linux-next v5 4/4] dt-bindings: usb: vialab,vl817: Cleanup compatible, reset-gpios and required   Anand Moon
• [PATCH v2 15/25] ASoC: meson: use helper function   Kuninori Morimoto
• failed to start gnome/gdm3 wayland session after apply NPU patches   Zhang Ning
• (subset) [PATCH v2 23/23] arm64: dts: Update cache properties for ti   Raghavendra, Vignesh
• [PATCH v2] power: reset: add Odroid Go Ultra poweroff driver   Sebastian Reichel
• [PATCH] watchdog: meson_gxbb: Use devm_clk_get_enabled() helper   Guenter Roeck
• [PATCH v3 3/7] dt-bindings: watchdog: convert meson-wdt.txt to dt-schema   Guenter Roeck
• [PATCH 1/2] dt-bindings: mmc: drop unneeded quotes   Wolfram Sang
• [PATCH 1/2] spi: dt-bindings: drop unneeded quotes   Serge Semin
• [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call   Serge Semin
• [PATCH v2 10/13] mtd: spi-nor: Add stacked memories support in spi-nor   Michal Simek
• [PATCH v2 01/13] spi: Add APIs in spi core to set/get spi->chip_select and spi->cs_gpiod   Michal Simek
• [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call   Michal Simek
• [PATCH v2 03/13] net: Replace all spi->chip_select and spi->cs_gpiod references with function call   Michal Simek
• [PATCH v2 04/13] iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call   Michal Simek
• [PATCH v2 05/13] mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call   Michal Simek
• [PATCH v2 06/13] staging: Replace all spi->chip_select and spi->cs_gpiod references with function call   Michal Simek
• [PATCH v2 07/13] platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call   Michal Simek
• [PATCH 05/13] dt-bindings: serial: cdsn,uart: add power-domains   Michal Simek
• [PATCH 04/13] dt-bindings: serial: correct ref to serial.yaml   Michal Simek
• [PATCH v1 03/11] arm64: dts: amlogic: Used onboard usb hub reset on odroid c2   Alexander Stein
• [PATCH 1/2] spi: dt-bindings: drop unneeded quotes   Heiko Stuebner
• [PATCH 1/2] dt-bindings: mmc: drop unneeded quotes   Heiko Stübner
• [PATCH 2/2] dt-bindings: mmc: correct pwrseq node names   Heiko Stübner
• [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call   Heiko Stübner
• [PATCH 2/2] dt-bindings: mmc: correct pwrseq node names   Heiko Stübner
• [PATCH v3] mmc: meson-gx: fix SDIO interrupt handling   Peter Suti
• [PATCH v3] mmc: meson-gx: fix SDIO interrupt handling   Peter Suti
• [PATCH v3] mmc: meson-gx: fix SDIO interrupt handling   Peter Suti
• [PATCH v2] arm64: dts: amlogic: Fix SDIO interrupt and make it level-sensitive   Peter Suti
• [RESEND2,v4,2/2] drm/meson: dw-hdmi: Use devm_regulator_*get_enable*()   Marek Szyprowski
• [PATCH] drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion   Marek Szyprowski
• [v3,3/7] drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement   Marek Szyprowski
• [v3,3/7] drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement   Marek Szyprowski
• [PATCH V6 0/3] Add S4 SoC PLL and Peripheral clock controller   Yu Tu
• [PATCH V6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller   Yu Tu
• [PATCH V6 2/3] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver   Yu Tu
• [PATCH V6 3/3] clk: meson: s4: add support for Amlogic S4 SoC peripheral clock controller   Yu Tu
• [PATCH V6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller   Yu Tu
• [PATCH V6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller   Yu Tu
• [PATCH V6 0/3] Add S4 SoC PLL and Peripheral clock controller   Yu Tu
• [PATCH V6 2/3] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver   Yu Tu
• [PATCH V6 3/3] clk: meson: s4: add support for Amlogic S4 SoC peripheral clock controller   Yu Tu
• [PATCH V6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller   Yu Tu
• [PATCH V6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller   Yu Tu
• [PATCH V6 2/3] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver   Yu Tu
• [PATCH V6 3/3] clk: meson: s4: add support for Amlogic S4 SoC peripheral clock controller   Yu Tu
• [PATCH V6 3/3] clk: meson: s4: add support for Amlogic S4 SoC peripheral clock controller   Yu Tu
• [PATCH V6 3/3] clk: meson: s4: add support for Amlogic S4 SoC peripheral clock controller   Yu Tu
• [PATCH V6 3/3] clk: meson: s4: add support for Amlogic S4 SoC peripheral clock controller   Yu Tu
• [PATCH 2/2] spi: dt-bindings: cleanup examples - indentation, lowercase hex   Geert Uytterhoeven
• [PATCH v2 12/12] dt-bindings: serial: example cleanup   Geert Uytterhoeven
• [RESEND2,v4,2/2] drm/meson: dw-hdmi: Use devm_regulator_*get_enable*()   Matti Vaittinen
• [PATCH v4 0/9] media: dt-bindings: common CEC properties   Hans Verkuil
• [PATCH v4 0/9] media: dt-bindings: common CEC properties   Hans Verkuil
• [PATCH 03/11] drm/aperture: Remove primary argument   Daniel Vetter
• [PATCH v6 4/8] arm64: dts: Add DT node for the VIPNano-QI on the A311D   Tomeu Vizoso
• failed to start gnome/gdm3 wayland session after apply NPU patches   Tomeu Vizoso
• failed to start gnome/gdm3 wayland session after apply NPU patches   Tomeu Vizoso
• [PATCH] arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC unit address   Vyacheslav
• [PATCH v2 03/12] dt-bindings: serial: pl011: allow ARM Primecell properties   Stefan Wahren
• [PATCH v2 02/13] spi: Replace all spi->chip_select and spi->cs_gpiod references with function call   William Zhang
• [PATCH v4 1/2] drm/tiny: ili9486: Enable driver module autoloading   Thomas Zimmermann
• [PATCH 03/11] drm/aperture: Remove primary argument   Thomas Zimmermann
• [PATCH v2 00/11] dt-bindings: first batch of dt-schema conversions for Amlogic Meson bindings   patchwork-bot+netdevbpf at kernel.org
• [PATCH net-next] net: mdio: mux-meson-g12a: use devm_clk_get_enabled to simplify the code   patchwork-bot+netdevbpf at kernel.org
• [PATCH v2 net] net: mdio-mux-meson-g12a: force internal PHY off on mux switch   patchwork-bot+netdevbpf at kernel.org
• [PATCH v2 net-next 0/2] net: mdio: add amlogic gxl mdio mux support   patchwork-bot+netdevbpf at kernel.org
• [PATCH v3] net: phy: meson-gxl: Add generic dummy stubs for MMD register access   patchwork-bot+netdevbpf at kernel.org
• [PATCH] Revert "arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0"   neil.armstrong at linaro.org
• [PATCH v2] Revert "arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0"   neil.armstrong at linaro.org
• [PATCH v2] Revert "arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0"   neil.armstrong at linaro.org
• [PATCH v2 1/6] arm64: dts: meson-gxl: jethub-j80: Fix WiFi MAC address node   neil.armstrong at linaro.org
• [PATCH v2 2/6] arm64: dts: meson-gxl: jethub-j80: Fix Bluetooth MAC node name   neil.armstrong at linaro.org
• [PATCH v2 3/6] arm64: dts: meson-axg: jethub-j1xx: Fix MAC address node names   neil.armstrong at linaro.org
• [PATCH v2 4/6] arm64: dts: meson-gx: Fix Ethernet MAC address unit name   neil.armstrong at linaro.org
• [PATCH v2 4/6] arm64: dts: meson-gx: Fix Ethernet MAC address unit name   neil.armstrong at linaro.org
• [PATCH v2 5/6] arm64: dts: meson-g12a: Fix internal Ethernet PHY unit name   neil.armstrong at linaro.org
• [PATCH v2 6/6] arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address   neil.armstrong at linaro.org
• [PATCH v2 7/9] arm64: dts: amlogic: Used onboard usb hub reset on odroid c4   neil.armstrong at linaro.org
• [PATCH v2 1/2] media: meson: vdec: implement 10bit bitstream handling   neil.armstrong at linaro.org
• [PATCH v2] arm64: dts: amlogic: Fix SDIO interrupt and make it level-sensitive   neil.armstrong at linaro.org
• [PATCH 2/2] media: meson: vdec: add HEVC decode codec   kernel test robot

Last message date: Tue Jan 31 23:35:42 PST 2023
Archived on: Wed Feb 1 08:04:55 PST 2023

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...