[PATCH v3] mmc: meson-gx: fix SDIO interrupt handling

[Heiner Kallweit]

On 18.01.2023 14:32, Peter Suti wrote:
> On Thu, Jan 12, 2023 at 10:27 PM Heiner Kallweit <hkallweit1 at gmail.com> wrote:
>>
>> On 09.01.2023 12:52, Peter Suti wrote:
>>> On Wed, Dec 14, 2022 at 10:33 PM Heiner Kallweit <hkallweit1 at gmail.com> wrote:
>>>>
>>>> On 14.12.2022 14:46, Peter Suti wrote:
>>>>>
>>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
>>>>> index 6e5ea0213b47..7d3ee2f9a7f6 100644
>>>>> --- a/drivers/mmc/host/meson-gx-mmc.c
>>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c
>>>>> @@ -1023,6 +1023,22 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
>>>>>       if (ret == IRQ_HANDLED)
>>>>>               meson_mmc_request_done(host->mmc, cmd->mrq);
>>>>>
>>>>> +     /*
>>>>> +     * Sometimes after we ack all raised interrupts,
>>>>> +     * an IRQ_SDIO can still be pending, which can get lost.
>>>>> +     *
>>>>
>>>> A reader may scratch his head here and wonder how the interrupt can get lost,
>>>> and why adding a workaround instead of eliminating the root cause for losing
>>>> the interrupt. If you can't provide an explanation why the root cause for
>>>> losing the interrupt can't be fixed, presumably you would have to say that
>>>> you're adding a workaround for a suspected silicon bug.
>>> After talking to the manufacturer, we got the following explanation
>>> for this situation:
>>
>> To which manufacturer did you talk, Marvell or Amlogic?
> 
> Amlogic
> 
>>
>>> "wifi may have dat1 interrupt coming in, without this the dat1
>>> interrupt would be missed"
>>
>> I don't understand this sentence. W/o the interrupt coming in
>> the interrupt would be missed? Can you explain it?
> 
> So the "without this" part of that sentence referred to the patch.
> Which means that without the patch, the interrupt can be missed.
> 
>>
>>> Supposedly this is fixed in their codebase.
>>
>> Which codebase do you mean? A specific vendor driver? Or firmware?
> 
> The vendor driver from openlinux2.amlogic.com handles SDIO interrupts
> a bit differently. It uses mmc_signal_sdio_irq()
> 
>>
>>> Unfortunately we were not able to find out more and can't prepare a
>>> patch with a proper explanation.
>>
>> The workaround is rather simple, so we should add it.
>> It's just unfortunate that we have no idea about the root cause of the issue.
> 
> After doing a more long term stress test, it was revealed that this
> patch is still not sufficient, but only masks the underlying problem
> better. Reverting 066ecde fixes the issue fully for us (verified
> overnight with iperf).
> v1 and v2 also fix the issue, but v3 does not correct the bug when
> WiFi is stressed for a longer time. And therefore it should not be
> used.
> Could you please give us some advice on how to investigate this further?

One more thought:
When checking device tree I found that my system uses IRQ_TYPE_LEVEL_HIGH
for the SDIO interrupt. meson-g12-common.dtsi uses IRQ_TYPE_EDGE_RISING
in mainline Linux, however vendor kernel uses IRQ_TYPE_LEVEL_HIGH
in meson-g12-common.dtsi. A wrong interrupt trigger type may result in
lost interrupts.
So you could check which trigger type your system uses for the SDIO interrupt.
If it's IRQ_TYPE_EDGE_RISING, re-test with IRQ_TYPE_LEVEL_HIGH.