[PATCH V6 2/3] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver

Yu Tu yu.tu at amlogic.com
Sat Jan 28 00:36:23 PST 2023



On 2023/1/20 17:43, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
> 
> 
> On Fri 20 Jan 2023 at 10:58, Yu Tu <yu.tu at amlogic.com> wrote:
> 
>> Hi Jerome,
>>
>> On 2023/1/19 19:20, Jerome Brunet wrote:
>>> [ EXTERNAL EMAIL ]
>>> On Mon 16 Jan 2023 at 15:42, Yu Tu <yu.tu at amlogic.com> wrote:
>>>
>>>> Add the S4 PLL clock controller driver in the s4 SoC family.
>>>>
>>>> Signed-off-by: Yu Tu <yu.tu at amlogic.com>
>>>> ---
>>> [...]
>>>
>>>> +
>>>> +static struct clk_regmap s4_fclk_div2 = {
>>>> +	.data = &(struct clk_regmap_gate_data){
>>>> +		.offset = ANACTRL_FIXPLL_CTRL1,
>>>> +		.bit_idx = 24,
>>>> +	},
>>>> +	.hw.init = &(struct clk_init_data){
>>>> +		.name = "fclk_div2",
>>>> +		.ops = &clk_regmap_gate_ro_ops,
>>> On the previous SoC, these fixed divider gate were not read-only.
>>> They are marked as critical when necessary, with the appropriate
>>> comment.
>>> Why is it different on the s4 ?
>>
>> In fact, this part of the SOC is no different from the previous G12a/b and
>> so on.
>>
>> I remember that my first version was made according to G12A, and I changed
>> this way under your suggestion.
>>
>> Maybe you were busy and forgot. For me, this mode and the previous g12a
>> mode function is ok. I can do either. So now how do you decide to go that
>> way?
> 
> No I did not forgot.
> I told you that cannot put CRITICAL (or IGNORE_USED) without explaining
> why. I stand by this. Same goes for RO ops.
> 

I will add an explanation.

>>
>>>
>>>> +		.parent_hws = (const struct clk_hw *[]) {
>>>> +			&s4_fclk_div2_div.hw
>>>> +		},
>>>> +		.num_parents = 1,
>>>> +	},
>>>> +};
>>>> +
>>> [...]
>>>
>>>> +#ifndef __MESON_S4_PLL_H__
>>>> +#define __MESON_S4_PLL_H__
>>>> +
>>>> +/* ANA_CTRL - Registers
>>>> + * REG_BASE:  REGISTER_BASE_ADDR = 0xfe008000
>>> This multi-line comment style is wrong in clk/
>>> REG_BASE is not used so I'm not sure this is useful
>>
>> I will remove REG_BASE and  change this format in next version.
>>
>>>
>>>> + */
>>>> +#define ANACTRL_FIXPLL_CTRL0                       0x040
>>>> +#define ANACTRL_FIXPLL_CTRL1                       0x044
>>>> +#define ANACTRL_FIXPLL_CTRL2                       0x048
>>>> +#define ANACTRL_FIXPLL_CTRL3                       0x04c
>>>> +#define ANACTRL_FIXPLL_CTRL4                       0x050
>>>> +#define ANACTRL_FIXPLL_CTRL5                       0x054
>>>> +#define ANACTRL_FIXPLL_CTRL6                       0x058
>>>> +#define ANACTRL_FIXPLL_STS                         0x05c
>>>> +#define ANACTRL_GP0PLL_CTRL0                       0x080
>>>> +#define ANACTRL_GP0PLL_CTRL1                       0x084
>>>> +#define ANACTRL_GP0PLL_CTRL2                       0x088
>>>> +#define ANACTRL_GP0PLL_CTRL3                       0x08c
>>>> +#define ANACTRL_GP0PLL_CTRL4                       0x090
>>>> +#define ANACTRL_GP0PLL_CTRL5                       0x094
>>>> +#define ANACTRL_GP0PLL_CTRL6                       0x098
>>>> +#define ANACTRL_GP0PLL_STS                         0x09c
>>>> +#define ANACTRL_HIFIPLL_CTRL0                      0x100
>>>> +#define ANACTRL_HIFIPLL_CTRL1                      0x104
>>>> +#define ANACTRL_HIFIPLL_CTRL2                      0x108
>>>> +#define ANACTRL_HIFIPLL_CTRL3                      0x10c
>>>> +#define ANACTRL_HIFIPLL_CTRL4                      0x110
>>>> +#define ANACTRL_HIFIPLL_CTRL5                      0x114
>>>> +#define ANACTRL_HIFIPLL_CTRL6                      0x118
>>>> +#define ANACTRL_HIFIPLL_STS                        0x11c
>>>> +#define ANACTRL_MPLL_CTRL0                         0x180
>>>> +#define ANACTRL_MPLL_CTRL1                         0x184
>>>> +#define ANACTRL_MPLL_CTRL2                         0x188
>>>> +#define ANACTRL_MPLL_CTRL3                         0x18c
>>>> +#define ANACTRL_MPLL_CTRL4                         0x190
>>>> +#define ANACTRL_MPLL_CTRL5                         0x194
>>>> +#define ANACTRL_MPLL_CTRL6                         0x198
>>>> +#define ANACTRL_MPLL_CTRL7                         0x19c
>>>> +#define ANACTRL_MPLL_CTRL8                         0x1a0
>>>> +#define ANACTRL_MPLL_STS                           0x1a4
>>>> +#define ANACTRL_HDMIPLL_CTRL0                      0x1c0
>>>> +#define ANACTRL_HDMIPLL_CTRL1                      0x1c4
>>>> +#define ANACTRL_HDMIPLL_CTRL2                      0x1c8
>>>> +#define ANACTRL_HDMIPLL_CTRL3                      0x1cc
>>>> +#define ANACTRL_HDMIPLL_CTRL4                      0x1d0
>>>> +#define ANACTRL_HDMIPLL_CTRL5                      0x1d4
>>>> +#define ANACTRL_HDMIPLL_CTRL6                      0x1d8
>>>> +#define ANACTRL_HDMIPLL_STS                        0x1dc
>>>> +#define ANACTRL_HDMIPLL_VLOCK                      0x1e4
>>>> +
>>>> +/*
>>>> + * CLKID index values
>>>> + *
>>>> + * These indices are entirely contrived and do not map onto the hardware.
>>>> + * It has now been decided to expose everything by default in the DT header:
>>>> + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
>>>> + * to expose, such as the internal muxes and dividers of composite clocks,
>>>> + * will remain defined here.
>>>> + */
>>>> +#define CLKID_FIXED_PLL_DCO		0
>>>> +#define CLKID_FCLK_DIV2_DIV		2
>>>> +#define CLKID_FCLK_DIV3_DIV		4
>>>> +#define CLKID_FCLK_DIV4_DIV		6
>>>> +#define CLKID_FCLK_DIV5_DIV		8
>>>> +#define CLKID_FCLK_DIV7_DIV		10
>>>> +#define CLKID_FCLK_DIV2P5_DIV		12
>>>> +#define CLKID_GP0_PLL_DCO		14
>>>> +#define CLKID_HIFI_PLL_DCO		16
>>>> +#define CLKID_HDMI_PLL_DCO		18
>>>> +#define CLKID_HDMI_PLL_OD		19
>>>> +#define CLKID_MPLL_50M_DIV		21
>>>> +#define CLKID_MPLL_PREDIV		23
>>>> +#define CLKID_MPLL0_DIV			24
>>>> +#define CLKID_MPLL1_DIV			26
>>>> +#define CLKID_MPLL2_DIV			28
>>>> +#define CLKID_MPLL3_DIV			30
>>>> +
>>>> +#define NR_PLL_CLKS			32
>>>> +/* include the CLKIDs that have been made part of the DT binding */
>>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
>>>> +
>>>> +#endif /* __MESON_S4_PLL_H__ */
>>>
> 



More information about the linux-amlogic mailing list