[PATCH 1/1] net: phy: meson-gxl: Add generic dummy stubs for MMD register access
Heiner Kallweit
hkallweit1 at gmail.com
Sun Jan 29 02:26:34 PST 2023
On 29.01.2023 03:26, Chris Healy wrote:
> From: Chris Healy <healych at amazon.com>
>
Hi Chris,
> The Meson G12A Internal PHY does not support standard IEEE MMD extended
> register access, therefore add generic dummy stubs to fail the read and
> write MMD calls. This is necessary to prevent the core PHY code from
> erroneously believing that EEE is supported by this PHY even though this
> PHY does not support EEE, as MMD register access returns all FFFFs.
>
> Signed-off-by: Chris Healy <healych at amazon.com>
> ---
> drivers/net/phy/meson-gxl.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
> index c49062ad72c6..5e41658b1e2f 100644
> --- a/drivers/net/phy/meson-gxl.c
> +++ b/drivers/net/phy/meson-gxl.c
> @@ -271,6 +271,8 @@ static struct phy_driver meson_gxl_phy[] = {
> .handle_interrupt = meson_gxl_handle_interrupt,
> .suspend = genphy_suspend,
> .resume = genphy_resume,
> + .read_mmd = genphy_read_mmd_unsupported,
> + .write_mmd = genphy_write_mmd_unsupported,
> },
> };
>
thanks for catching this. The same issue we may have for the GXL-internal PHY.
Did you check this?
One result of the issue is the invalid ethtool --show-eee output given below.
Therefore the patch should go to stable, please annotate it as [PATCH net].
Fixes tag should be:
5c3407abb338 ("net: phy: meson-gxl: add g12a support")
EEE settings for eth0:
EEE status: enabled - active
Tx LPI: 1000000 (us)
Supported EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
1000baseKX/Full
10000baseKX4/Full
10000baseKR/Full
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
1000baseKX/Full
10000baseKX4/Full
10000baseKR/Full
Link partner advertised EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
1000baseKX/Full
10000baseKX4/Full
10000baseKR/Full
More information about the linux-amlogic
mailing list