[PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding

[Heiner Kallweit]

On 24.01.2023 02:22, Rob Herring wrote:
> 
> On Mon, 23 Jan 2023 22:30:44 +0100, Heiner Kallweit wrote:
>> Add Amlogic Meson pinctrl binding.
>> Tested with make targets dt_binding_check and dtbs_check.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
>> ---
>>  .../pinctrl/amlogic,meson-pinctrl.yaml        | 121 ++++++++++++++++++
>>  .../bindings/pinctrl/meson,pinctrl.txt        |  94 --------------
>>  2 files changed, 121 insertions(+), 94 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
>>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
>>
> 

Thanks, I didn't catch these warnings because Meson8 support isn't
enabled on my system. Will look into it.

> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/69188960-9d88-4163-8a87-1820fb673eb9@gmail.com
> 
> 
> pinctrl at 84: #address-cells:0:0: 2 was expected
> 	arch/arm/boot/dts/meson8b-ec100.dtb
> 	arch/arm/boot/dts/meson8b-mxq.dtb
> 	arch/arm/boot/dts/meson8b-odroidc1.dtb
> 	arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> 	arch/arm/boot/dts/meson8-minix-neo-x8.dtb
> 
> pinctrl at 84: compatible: ['amlogic,meson8m2-aobus-pinctrl', 'amlogic,meson8-aobus-pinctrl'] is too long
> 	arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> 
> pinctrl at 84: reg: 'anyOf' conditional failed, one must be fixed:
> 	arch/arm/boot/dts/meson8b-ec100.dtb
> 	arch/arm/boot/dts/meson8b-mxq.dtb
> 	arch/arm/boot/dts/meson8b-odroidc1.dtb
> 	arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> 	arch/arm/boot/dts/meson8-minix-neo-x8.dtb
> 
> pinctrl at 84: #size-cells:0:0: 2 was expected
> 	arch/arm/boot/dts/meson8b-ec100.dtb
> 	arch/arm/boot/dts/meson8b-mxq.dtb
> 	arch/arm/boot/dts/meson8b-odroidc1.dtb
> 	arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> 	arch/arm/boot/dts/meson8-minix-neo-x8.dtb
> 
> pinctrl at 9880: #address-cells:0:0: 2 was expected
> 	arch/arm/boot/dts/meson8b-ec100.dtb
> 	arch/arm/boot/dts/meson8b-mxq.dtb
> 	arch/arm/boot/dts/meson8b-odroidc1.dtb
> 	arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> 	arch/arm/boot/dts/meson8-minix-neo-x8.dtb
> 
> pinctrl at 9880: compatible: ['amlogic,meson8m2-cbus-pinctrl', 'amlogic,meson8-cbus-pinctrl'] is too long
> 	arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> 
> pinctrl at 9880: reg: 'anyOf' conditional failed, one must be fixed:
> 	arch/arm/boot/dts/meson8b-ec100.dtb
> 	arch/arm/boot/dts/meson8b-mxq.dtb
> 	arch/arm/boot/dts/meson8b-odroidc1.dtb
> 	arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> 	arch/arm/boot/dts/meson8-minix-neo-x8.dtb
> 
> pinctrl at 9880: #size-cells:0:0: 2 was expected
> 	arch/arm/boot/dts/meson8b-ec100.dtb
> 	arch/arm/boot/dts/meson8b-mxq.dtb
> 	arch/arm/boot/dts/meson8b-odroidc1.dtb
> 	arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> 	arch/arm/boot/dts/meson8-minix-neo-x8.dtb
>