[PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding

Heiner Kallweit hkallweit1 at gmail.com
Mon Jan 23 13:30:44 PST 2023


Add Amlogic Meson pinctrl binding.
Tested with make targets dt_binding_check and dtbs_check.

Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
 .../pinctrl/amlogic,meson-pinctrl.yaml        | 121 ++++++++++++++++++
 .../bindings/pinctrl/meson,pinctrl.txt        |  94 --------------
 2 files changed, 121 insertions(+), 94 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
new file mode 100644
index 000000000..afdf4dade
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson pinmux controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong at linaro.org>
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson8-cbus-pinctrl
+      - amlogic,meson8b-cbus-pinctrl
+      - amlogic,meson8m2-cbus-pinctrl
+      - amlogic,meson8-aobus-pinctrl
+      - amlogic,meson8b-aobus-pinctrl
+      - amlogic,meson8m2-aobus-pinctrl
+      - amlogic,meson-gxbb-periphs-pinctrl
+      - amlogic,meson-gxbb-aobus-pinctrl
+      - amlogic,meson-gxl-periphs-pinctrl
+      - amlogic,meson-gxl-aobus-pinctrl
+      - amlogic,meson-axg-periphs-pinctrl
+      - amlogic,meson-axg-aobus-pinctrl
+      - amlogic,meson-g12a-periphs-pinctrl
+      - amlogic,meson-g12a-aobus-pinctrl
+      - amlogic,meson-a1-periphs-pinctrl
+      - amlogic,meson-s4-periphs-pinctrl
+
+  ranges: true
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+required:
+  - compatible
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+patternProperties:
+  "^bank@[0-9]$":
+    type: object
+    properties:
+      reg:
+        minItems: 5
+        maxItems: 5
+
+      reg-names:
+        items:
+          - const: gpio
+          - const: pull
+          - const: pull-enable
+          - const: mux
+          - const: ds
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      gpio-ranges:
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+    required:
+      - reg
+      - reg-names
+      - gpio-controller
+      - "#gpio-cells"
+      - gpio-ranges
+
+examples:
+  - |
+    bus at 34400 {
+      reg = <0x0 0x34400 0x0 0x400>;
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pinctrl at 40 {
+        compatible = "amlogic,meson-g12a-periphs-pinctrl";
+        #address-cells = <2>;
+        #size-cells = <2>;
+        /* avoid "unit has no reg or ranges property" warning */
+        ranges = <0x0 0x0 0x0 0x34400 0x0 0x100>;
+
+        bank at 40 {
+          reg = <0x0 0x40  0x0 0x4c>,
+                <0x0 0xe8  0x0 0x18>,
+                <0x0 0x120 0x0 0x18>,
+                <0x0 0x2c0 0x0 0x40>,
+                <0x0 0x340 0x0 0x1c>;
+          reg-names = "gpio", "pull", "pull-enable", "mux", "ds";
+          gpio-controller;
+          #gpio-cells = <2>;
+          gpio-ranges = <&periphs_pinctrl 0 0 86>;
+        };
+
+        cec_ao_a_h_pins: cec_ao_a_h {
+          mux {
+            groups = "cec_ao_a_h";
+            function = "cec_ao_a_h";
+            bias-disable;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
deleted file mode 100644
index 8146193bd..000000000
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-== Amlogic Meson pinmux controller ==
-
-Required properties for the root node:
- - compatible: one of "amlogic,meson8-cbus-pinctrl"
-		      "amlogic,meson8b-cbus-pinctrl"
-		      "amlogic,meson8m2-cbus-pinctrl"
-		      "amlogic,meson8-aobus-pinctrl"
-		      "amlogic,meson8b-aobus-pinctrl"
-		      "amlogic,meson8m2-aobus-pinctrl"
-		      "amlogic,meson-gxbb-periphs-pinctrl"
-		      "amlogic,meson-gxbb-aobus-pinctrl"
-		      "amlogic,meson-gxl-periphs-pinctrl"
-		      "amlogic,meson-gxl-aobus-pinctrl"
-		      "amlogic,meson-axg-periphs-pinctrl"
-		      "amlogic,meson-axg-aobus-pinctrl"
-		      "amlogic,meson-g12a-periphs-pinctrl"
-		      "amlogic,meson-g12a-aobus-pinctrl"
-		      "amlogic,meson-a1-periphs-pinctrl"
-		      "amlogic,meson-s4-periphs-pinctrl"
- - reg: address and size of registers controlling irq functionality
-
-=== GPIO sub-nodes ===
-
-The GPIO bank for the controller is represented as a sub-node and it acts as a
-GPIO controller.
-
-Required properties for sub-nodes are:
- - reg: should contain a list of address and size, one tuple for each entry
-   in reg-names.
- - reg-names: an array of strings describing the "reg" entries.
-   Must contain "mux" and "gpio".
-   May contain "pull", "pull-enable" and "ds" when appropriate.
- - gpio-controller: identifies the node as a gpio controller
- - #gpio-cells: must be 2
-
-=== Other sub-nodes ===
-
-Child nodes without the "gpio-controller" represent some desired
-configuration for a pin or a group. Those nodes can be pinmux nodes or
-configuration nodes.
-
-Required properties for pinmux nodes are:
- - groups: a list of pinmux groups. The list of all available groups
-   depends on the SoC and can be found in driver sources.
- - function: the name of a function to activate for the specified set
-   of groups. The list of all available functions depends on the SoC
-   and can be found in driver sources.
-
-Required properties for configuration nodes:
- - pins: a list of pin names
-
-Configuration nodes support the following generic properties, as
-described in file pinctrl-bindings.txt:
- - "bias-disable"
- - "bias-pull-up"
- - "bias-pull-down"
- - "output-enable"
- - "output-disable"
- - "output-low"
- - "output-high"
-
-Optional properties :
- - drive-strength-microamp: Drive strength for the specified pins in uA.
-			    This property is only valid for G12A and newer.
-
-=== Example ===
-
-	pinctrl: pinctrl at c1109880 {
-		compatible = "amlogic,meson8-cbus-pinctrl";
-		reg = <0xc1109880 0x10>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio: banks at c11080b0 {
-			reg = <0xc11080b0 0x28>,
-			      <0xc11080e8 0x18>,
-			      <0xc1108120 0x18>,
-			      <0xc1108030 0x30>;
-			reg-names = "mux", "pull", "pull-enable", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-               };
-
-		nand {
-			mux {
-				groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
-					 "nand_io_rb0", "nand_ale", "nand_cle",
-					 "nand_wen_clk", "nand_ren_clk", "nand_dqs",
-					 "nand_ce2", "nand_ce3";
-				function = "nand";
-			};
-		};
-	};
-- 
2.39.1





More information about the linux-amlogic mailing list