[PATCH v3 0/9] Used onboard HUB to reset and add power to hub

Anand Moon linux.amoon at gmail.com
Sun Jan 22 08:36:38 PST 2023


Hi Neil,

On Sun, 22 Jan 2023 at 15:57, Neil Armstrong <neil.armstrong at linaro.org> wrote:
>
> Hi Anand,
>
> Le 21/01/2023 à 18:56, Anand Moon a écrit :
> > Amlogic board use gpio-hog to reset the USB hub.
> > so using onboard hub we could reset the USB hub and
> > also enable power to the USB hub.
> > v3: Fix some small changes in $subject
> >      address the input from Neil
> >      fix the vialab device tree binding as per Krzysztof inputs.
> >
> > v2: Odroid C1 / C2 : usb hub reset working as expected.
> >      Odroid N2 : dropped usb hub changes, since my board USB hub
> >                  is hitting regression.
> >      Odroid C4 : Fix the device tree binding and used peer-hub for
> >                  usb2.0 and usb3.0 hub.
> > [1] https://lore.kernel.org/all/20230118044418.875-10-linux.amoon@gmail.com
> >
> > v1: Odroid C1 / C2 : were not working as expected.
> >      Odroid N2 : used single USB 3.0 hub reset.
> >      Odroid C4 : used single USB 3.0 hub reset.
> >
> > [0] https://patchwork.kernel.org/project/linux-amlogic/list/?series=707292
> >
> > Any inputs for these changes ?
>
> Most of the patches have been applied by Greg, so rebase this serie on
> the lastest linux-next and send only the remaining patches.
>
> Neil
>

Ok. Thanks
-Anand



More information about the linux-amlogic mailing list