[PATCH V6 2/3] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver

[Jerome Brunet]

On Mon 16 Jan 2023 at 15:42, Yu Tu <yu.tu at amlogic.com> wrote:

> Add the S4 PLL clock controller driver in the s4 SoC family.
>
> Signed-off-by: Yu Tu <yu.tu at amlogic.com>
> ---

[...]

> +
> +static struct clk_regmap s4_fclk_div2 = {
> +	.data = &(struct clk_regmap_gate_data){
> +		.offset = ANACTRL_FIXPLL_CTRL1,
> +		.bit_idx = 24,
> +	},
> +	.hw.init = &(struct clk_init_data){
> +		.name = "fclk_div2",
> +		.ops = &clk_regmap_gate_ro_ops,

On the previous SoC, these fixed divider gate were not read-only.
They are marked as critical when necessary, with the appropriate
comment.

Why is it different on the s4 ?

> +		.parent_hws = (const struct clk_hw *[]) {
> +			&s4_fclk_div2_div.hw
> +		},
> +		.num_parents = 1,
> +	},
> +};
> +

[...]

> +#ifndef __MESON_S4_PLL_H__
> +#define __MESON_S4_PLL_H__
> +
> +/* ANA_CTRL - Registers
> + * REG_BASE:  REGISTER_BASE_ADDR = 0xfe008000

This multi-line comment style is wrong in clk/
REG_BASE is not used so I'm not sure this is useful

> + */
> +#define ANACTRL_FIXPLL_CTRL0                       0x040
> +#define ANACTRL_FIXPLL_CTRL1                       0x044
> +#define ANACTRL_FIXPLL_CTRL2                       0x048
> +#define ANACTRL_FIXPLL_CTRL3                       0x04c
> +#define ANACTRL_FIXPLL_CTRL4                       0x050
> +#define ANACTRL_FIXPLL_CTRL5                       0x054
> +#define ANACTRL_FIXPLL_CTRL6                       0x058
> +#define ANACTRL_FIXPLL_STS                         0x05c
> +#define ANACTRL_GP0PLL_CTRL0                       0x080
> +#define ANACTRL_GP0PLL_CTRL1                       0x084
> +#define ANACTRL_GP0PLL_CTRL2                       0x088
> +#define ANACTRL_GP0PLL_CTRL3                       0x08c
> +#define ANACTRL_GP0PLL_CTRL4                       0x090
> +#define ANACTRL_GP0PLL_CTRL5                       0x094
> +#define ANACTRL_GP0PLL_CTRL6                       0x098
> +#define ANACTRL_GP0PLL_STS                         0x09c
> +#define ANACTRL_HIFIPLL_CTRL0                      0x100
> +#define ANACTRL_HIFIPLL_CTRL1                      0x104
> +#define ANACTRL_HIFIPLL_CTRL2                      0x108
> +#define ANACTRL_HIFIPLL_CTRL3                      0x10c
> +#define ANACTRL_HIFIPLL_CTRL4                      0x110
> +#define ANACTRL_HIFIPLL_CTRL5                      0x114
> +#define ANACTRL_HIFIPLL_CTRL6                      0x118
> +#define ANACTRL_HIFIPLL_STS                        0x11c
> +#define ANACTRL_MPLL_CTRL0                         0x180
> +#define ANACTRL_MPLL_CTRL1                         0x184
> +#define ANACTRL_MPLL_CTRL2                         0x188
> +#define ANACTRL_MPLL_CTRL3                         0x18c
> +#define ANACTRL_MPLL_CTRL4                         0x190
> +#define ANACTRL_MPLL_CTRL5                         0x194
> +#define ANACTRL_MPLL_CTRL6                         0x198
> +#define ANACTRL_MPLL_CTRL7                         0x19c
> +#define ANACTRL_MPLL_CTRL8                         0x1a0
> +#define ANACTRL_MPLL_STS                           0x1a4
> +#define ANACTRL_HDMIPLL_CTRL0                      0x1c0
> +#define ANACTRL_HDMIPLL_CTRL1                      0x1c4
> +#define ANACTRL_HDMIPLL_CTRL2                      0x1c8
> +#define ANACTRL_HDMIPLL_CTRL3                      0x1cc
> +#define ANACTRL_HDMIPLL_CTRL4                      0x1d0
> +#define ANACTRL_HDMIPLL_CTRL5                      0x1d4
> +#define ANACTRL_HDMIPLL_CTRL6                      0x1d8
> +#define ANACTRL_HDMIPLL_STS                        0x1dc
> +#define ANACTRL_HDMIPLL_VLOCK                      0x1e4
> +
> +/*
> + * CLKID index values
> + *
> + * These indices are entirely contrived and do not map onto the hardware.
> + * It has now been decided to expose everything by default in the DT header:
> + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
> + * to expose, such as the internal muxes and dividers of composite clocks,
> + * will remain defined here.
> + */
> +#define CLKID_FIXED_PLL_DCO		0
> +#define CLKID_FCLK_DIV2_DIV		2
> +#define CLKID_FCLK_DIV3_DIV		4
> +#define CLKID_FCLK_DIV4_DIV		6
> +#define CLKID_FCLK_DIV5_DIV		8
> +#define CLKID_FCLK_DIV7_DIV		10
> +#define CLKID_FCLK_DIV2P5_DIV		12
> +#define CLKID_GP0_PLL_DCO		14
> +#define CLKID_HIFI_PLL_DCO		16
> +#define CLKID_HDMI_PLL_DCO		18
> +#define CLKID_HDMI_PLL_OD		19
> +#define CLKID_MPLL_50M_DIV		21
> +#define CLKID_MPLL_PREDIV		23
> +#define CLKID_MPLL0_DIV			24
> +#define CLKID_MPLL1_DIV			26
> +#define CLKID_MPLL2_DIV			28
> +#define CLKID_MPLL3_DIV			30
> +
> +#define NR_PLL_CLKS			32
> +/* include the CLKIDs that have been made part of the DT binding */
> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
> +
> +#endif /* __MESON_S4_PLL_H__ */