[PATCH V6 0/3] Add S4 SoC PLL and Peripheral clock controller

Jerome Brunet jbrunet at baylibre.com
Thu Jan 19 03:18:30 PST 2023


On Mon 16 Jan 2023 at 15:42, Yu Tu <yu.tu at amlogic.com> wrote:

> 1. Add S4 SoC PLL and Peripheral clock controller dt-bindings.
> 2. Add PLL and Peripheral clock controller driver for S4 SOC.
>
> Yu Tu (3):
>   dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock
>     controller
>   clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
>   clk: meson: s4: add support for Amlogic S4 SoC peripheral clock
>     controller

You are adding 2 controller driver with this series.
Making 2 driver patches on clk/ is good. Please do the same for the bindings

>
> V5 -> V6: Change send patch series, as well change format and clock flags.
> V4 -> V5: change format and clock flags and adjust the patch series as suggested
> by Jerome.
> V3 -> V4: change format and clock flags.
> V2 -> V3: Use two clock controller.
> V1 -> V2: Change format as discussed in the email.
>
> Link:https://lore.kernel.org/all/20221123021346.18136-1-yu.tu@amlogic.com/
>
>  .../clock/amlogic,s4-peripherals-clkc.yaml    |  104 +
>  .../bindings/clock/amlogic,s4-pll-clkc.yaml   |   50 +
>  MAINTAINERS                                   |    1 +
>  drivers/clk/meson/Kconfig                     |   25 +
>  drivers/clk/meson/Makefile                    |    2 +
>  drivers/clk/meson/s4-peripherals.c            | 3874 +++++++++++++++++
>  drivers/clk/meson/s4-peripherals.h            |  218 +
>  drivers/clk/meson/s4-pll.c                    |  875 ++++
>  drivers/clk/meson/s4-pll.h                    |   88 +
>  .../clock/amlogic,s4-peripherals-clkc.h       |  131 +
>  .../dt-bindings/clock/amlogic,s4-pll-clkc.h   |   30 +
>  11 files changed, 5398 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml
>  create mode 100644 drivers/clk/meson/s4-peripherals.c
>  create mode 100644 drivers/clk/meson/s4-peripherals.h
>  create mode 100644 drivers/clk/meson/s4-pll.c
>  create mode 100644 drivers/clk/meson/s4-pll.h
>  create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h
>  create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h
>
>
> base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2




More information about the linux-amlogic mailing list