[PATCH v2 2/2] arm64: dts: meson: add support for Radxa Zero2
Neil Armstrong
neil.armstrong at linaro.org
Fri Jan 27 08:25:12 PST 2023
On 27/01/2023 16:05, Christian Hewitt wrote:
> From: Yuntian Zhang <yt at radxa.com>
>
> Radxa Zero2 is a small form factor SBC based on the Amlogic A311D
> chipset that ships in a number of eMMC configurations:
>
> - Amlogic A311D (Quad A73 + Dual A53) CPU
> - 4GB LPDDR4 RAM
> - 32/64/128GB eMMC
> - Mali G52-MP4 GPU
> - HDMI 2.1 output (micro)
> - BCM4345 WiFi (2.4/5GHz a/b/g/n/ac) and BT 5.0
> - 1x USB 2.0 port - Type C (OTG)
> - 1x USB 3.0 port - Type C (Host)
> - 1x micro SD Card slot
> - 40 Pin GPIO header
>
> Signed-off-by: Yuntian Zhang <yt at radxa.com>
> Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
> ---
> The original dts from Yuntian contains some additional content for
> the USB-C device, but this is not working for me so I have ommited
> it and kept things simple. I've also left out some pwm-fan/thermal
> content; while the board does not ship with a fan the A311D chip
> should be used with one and I believe the board has a connector to
> add a fan, but until this is confirmed (and production boards are
> available) it's best left out.
>
> Changes from v1:
> - Corrected underscores in node names
> - Corrected wifi32k clock node name
>
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> .../dts/amlogic/meson-g12b-radxa-zero2.dts | 489 ++++++++++++++++++
> 2 files changed, 490 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 04114e8c9992..bb1af1d80c21 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2l.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> new file mode 100644
> index 000000000000..9a60c5ec2072
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> @@ -0,0 +1,489 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
> + * Copyright (c) 2022 Radxa Limited
> + * Author: Yuntian Zhang <yt at radxa.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-g12b-a311d.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/gpio/meson-g12a-gpio.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> +
> +/ {
> + compatible = "radxa,zero2", "amlogic,a311d", "amlogic,g12b";
> + model = "Radxa Zero2";
> +
> + aliases {
> + serial0 = &uart_AO;
> + serial2 = &uart_A;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + poll-interval = <100>;
> + power-button {
> + label = "power";
> + linux,code = <KEY_POWER>;
> + gpios = <&gpio_ao GPIOAO_3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led-green {
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_STATUS;
> + gpios = <&gpio GPIOA_12 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&hdmi_tx_tmds_out>;
> + };
> + };
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> + clocks = <&wifi32k>;
> + clock-names = "ext_clock";
> + };
> +
> + ao_5v: regulator-ao-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "AO_5V";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + vcc_1v8: regulator-vcc-1v8 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_1V8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc_3v3>;
> + regulator-always-on;
> + };
> +
> + vcc_3v3: regulator-vcc-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vddao_3v3>;
> + regulator-always-on;
> + /* FIXME: actually controlled by VDDCPU_B_EN */
> + };
> +
> + vddao_1v8: regulator-vddao-1v8 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_AO1V8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vddao_3v3>;
> + regulator-always-on;
> + };
> +
> + vddao_3v3: regulator-vddao-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDAO_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&ao_5v>;
> + regulator-always-on;
> + };
> +
> + vddcpu_a: regulator-vddcpu-a {
> + /*
> + * MP8756GD Regulator.
> + */
> + compatible = "pwm-regulator";
> +
> + regulator-name = "VDDCPU_A";
> + regulator-min-microvolt = <730000>;
> + regulator-max-microvolt = <1022000>;
> +
> + pwm-supply = <&ao_5v>;
> +
> + pwms = <&pwm_ab 0 1250 0>;
> + pwm-dutycycle-range = <100 0>;
> +
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vddcpu_b: regulator-vddcpu-b {
> + /*
> + * Silergy SY8120B1ABC Regulator.
> + */
> + compatible = "pwm-regulator";
> +
> + regulator-name = "VDDCPU_B";
> + regulator-min-microvolt = <730000>;
> + regulator-max-microvolt = <1022000>;
> +
> + pwm-supply = <&ao_5v>;
> +
> + pwms = <&pwm_AO_cd 1 1250 0>;
> + pwm-dutycycle-range = <100 0>;
> +
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sound {
> + compatible = "amlogic,axg-sound-card";
> + model = "RADXA-ZERO2";
> + audio-aux-devs = <&tdmout_b>;
> + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> + "TDMOUT_B IN 1", "FRDDR_B OUT 1",
> + "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> + "TDM_B Playback", "TDMOUT_B OUT";
> +
> + assigned-clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + assigned-clock-parents = <0>, <0>, <0>;
> + assigned-clock-rates = <294912000>,
> + <270950400>,
> + <393216000>;
> +
> + dai-link-0 {
> + sound-dai = <&frddr_a>;
> + };
> +
> + dai-link-1 {
> + sound-dai = <&frddr_b>;
> + };
> +
> + dai-link-2 {
> + sound-dai = <&frddr_c>;
> + };
> +
> + /* 8ch hdmi interface */
> + dai-link-3 {
> + sound-dai = <&tdmif_b>;
> + dai-format = "i2s";
> + dai-tdm-slot-tx-mask-0 = <1 1>;
> + dai-tdm-slot-tx-mask-1 = <1 1>;
> + dai-tdm-slot-tx-mask-2 = <1 1>;
> + dai-tdm-slot-tx-mask-3 = <1 1>;
> + mclk-fs = <256>;
> +
> + codec {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> + };
> + };
> +
> + /* hdmi glue */
> + dai-link-4 {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> + codec {
> + sound-dai = <&hdmi_tx>;
> + };
> + };
> + };
> +
> + wifi32k: clock-0 {
> + compatible = "pwm-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> + };
> +};
> +
> +&arb {
> + status = "okay";
> +};
> +
> +&cec_AO {
> + pinctrl-0 = <&cec_ao_a_h_pins>;
> + pinctrl-names = "default";
> + status = "disabled";
> + hdmi-phandle = <&hdmi_tx>;
> +};
> +
> +&cecb_AO {
> + pinctrl-0 = <&cec_ao_b_h_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> + hdmi-phandle = <&hdmi_tx>;
> +};
> +
> +&clkc_audio {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + cpu-supply = <&vddcpu_b>;
> + operating-points-v2 = <&cpu_opp_table_0>;
> + clocks = <&clkc CLKID_CPU_CLK>;
> + clock-latency = <50000>;
> +};
> +
> +&cpu1 {
> + cpu-supply = <&vddcpu_b>;
> + operating-points-v2 = <&cpu_opp_table_0>;
> + clocks = <&clkc CLKID_CPU_CLK>;
> + clock-latency = <50000>;
> +};
> +
> +&cpu100 {
> + cpu-supply = <&vddcpu_a>;
> + operating-points-v2 = <&cpub_opp_table_1>;
> + clocks = <&clkc CLKID_CPUB_CLK>;
> + clock-latency = <50000>;
> +};
> +
> +&cpu101 {
> + cpu-supply = <&vddcpu_a>;
> + operating-points-v2 = <&cpub_opp_table_1>;
> + clocks = <&clkc CLKID_CPUB_CLK>;
> + clock-latency = <50000>;
> +};
> +
> +&cpu102 {
> + cpu-supply = <&vddcpu_a>;
> + operating-points-v2 = <&cpub_opp_table_1>;
> + clocks = <&clkc CLKID_CPUB_CLK>;
> + clock-latency = <50000>;
> +};
> +
> +&cpu103 {
> + cpu-supply = <&vddcpu_a>;
> + operating-points-v2 = <&cpub_opp_table_1>;
> + clocks = <&clkc CLKID_CPUB_CLK>;
> + clock-latency = <50000>;
> +};
> +
> +&frddr_a {
> + status = "okay";
> +};
> +
> +&frddr_b {
> + status = "okay";
> +};
> +
> +&frddr_c {
> + status = "okay";
> +};
> +
> +&gpio {
> + gpio-line-names =
> + /* GPIOZ */
> + "PIN_27", "PIN_28", "PIN_7", "PIN_11", "PIN_13", "PIN_15", "PIN_18", "PIN_40",
> + "", "", "", "", "", "", "", "",
> + /* GPIOH */
> + "", "", "", "", "PIN_19", "PIN_21", "PIN_24", "PIN_23",
> + "",
> + /* BOOT */
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "EMMC_PWRSEQ", "", "", "",
> + /* GPIOC */
> + "", "", "", "", "", "", "SD_CD", "PIN_36",
> + /* GPIOA */
> + "PIN_32", "PIN_12", "PIN_35", "", "", "PIN_38", "", "",
> + "", "", "", "", "LED_GREEN", "PIN_31", "PIN_3", "PIN_5",
> + /* GPIOX */
> + "", "", "", "", "", "", "SDIO_PWRSEQ", "",
> + "", "", "", "", "", "", "", "",
> + "", "BT_SHUTDOWN", "", "";
> +};
> +
> +&gpio_ao {
> + gpio-line-names =
> + /* GPIOAO */
> + "PIN_8", "PIN_10", "", "BTN_POWER", "", "", "", "PIN_29",
> + "PIN_33", "PIN_37", "FAN", "",
> + /* GPIOE */
> + "", "", "";
> +};
> +
> +&hdmi_tx {
> + status = "okay";
> + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> + pinctrl-names = "default";
> + hdmi-supply = <&ao_5v>;
> +};
> +
> +&hdmi_tx_tmds_port {
> + hdmi_tx_tmds_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> +};
> +
> +&ir {
> + status = "disabled";
> + pinctrl-0 = <&remote_input_ao_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&pwm_ab {
> + pinctrl-0 = <&pwm_a_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&xtal>;
> + clock-names = "clkin0";
> + status = "okay";
> +};
> +
> +&pwm_ef {
> + pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&xtal>;
> + clock-names = "clkin2";
> + status = "okay";
> +};
> +
> +&pwm_AO_ab {
> + pinctrl-0 = <&pwm_ao_a_pins>;
> + pinctrl-names = "default";
> + clocks = <&xtal>;
> + clock-names = "clkin3";
> + status = "okay";
> +};
> +
> +&pwm_AO_cd {
> + pinctrl-0 = <&pwm_ao_d_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&xtal>;
> + clock-names = "clkin4";
> + status = "okay";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vddao_1v8>;
> +};
> +
> +/* SDIO */
> +&sd_emmc_a {
> + status = "okay";
> + pinctrl-0 = <&sdio_pins>;
> + pinctrl-1 = <&sdio_clk_gate_pins>;
> + pinctrl-names = "default", "clk-gate";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> +
> + non-removable;
> + disable-wp;
> +
> + /* WiFi firmware requires power to be kept while in suspend */
> + keep-power-in-suspend;
> +
> + mmc-pwrseq = <&sdio_pwrseq>;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddao_1v8>;
> +
> + brcmf: wifi at 1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + };
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> + status = "okay";
> + pinctrl-0 = <&sdcard_c_pins>;
> + pinctrl-1 = <&sdcard_clk_gate_c_pins>;
> + pinctrl-names = "default", "clk-gate";
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <50000000>;
> + disable-wp;
> +
> + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddao_3v3>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> + status = "okay";
> + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
> + pinctrl-1 = <&emmc_clk_gate_pins>;
> + pinctrl-names = "default", "clk-gate";
> +
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> + max-frequency = <200000000>;
> + disable-wp;
> +
> + mmc-pwrseq = <&emmc_pwrseq>;
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vcc_1v8>;
> +};
> +
> +&tdmif_b {
> + status = "okay";
> +};
> +
> +&tdmout_b {
> + status = "okay";
> +};
> +
> +&tohdmitx {
> + status = "okay";
> +};
> +
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> + max-speed = <2000000>;
> + clocks = <&wifi32k>;
> + clock-names = "lpo";
> + };
> +};
> +
> +&uart_AO {
> + status = "okay";
> + pinctrl-0 = <&uart_ao_a_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&usb {
> + status = "okay";
> +};
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
More information about the linux-amlogic
mailing list