[PATCH v2] arm64: dts: amlogic: Fix SDIO interrupt and make it level-sensitive

[Heiner Kallweit]

SDIO specification defines that the interrupt is level-sensitive.
Fix the interrupt trigger type for emmc_a accordingly.
See comment at beginning of the file wrt which is the SDIO port.
mmc2 = &sd_emmc_a; /* SDIO */

The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.

Note:
SDIO interrupt support was added in Linux just recently, however other
users of this dts may be affected too.

[0] https://www.spinics.net/lists/linux-mmc/msg73991.html

Fixes: 1499218c80c9 ("arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi")
Reported-by: Peter Suti <peter.suti at streamunlimited.com>
Tested-by: Peter Suti <peter.suti at streamunlimited.com>
Cc: stable at vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
v2:
- rebase considering recent node name change sd -> mmc for sd_emmc_a
---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 1a931d5c2..c09eb9f6f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2324,7 +2324,7 @@ uart_A: serial at 24000 {
 		sd_emmc_a: mmc at ffe03000 {
 			compatible = "amlogic,meson-axg-mmc";
 			reg = <0x0 0xffe03000 0x0 0x800>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			clocks = <&clkc CLKID_SD_EMMC_A>,
 				 <&clkc CLKID_SD_EMMC_A_CLK0>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index a79a35e84..ae1a5a568 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -603,7 +603,7 @@ apb: apb at d0000000 {
 			sd_emmc_a: mmc at 70000 {
 				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 				reg = <0x0 0x70000 0x0 0x800>;
-				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
-- 
2.39.1