[PATCH 2/2] dt-bindings: mmc: correct pwrseq node names

[Krzysztof Kozlowski]

Node names should be generic and should not contain underscores.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml   | 2 +-
 Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml | 2 +-
 Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
index 911a5996e099..588be73168fa 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
@@ -41,7 +41,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    sdhci0_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-emmc";
       reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
     };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
index 3397dbff88c2..b35e00e8c65e 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
@@ -35,7 +35,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    wifi_pwrseq: wifi_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-sd8787";
       powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
       reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
index 64e3644eefeb..00feaafc1063 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
@@ -55,7 +55,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    sdhci0_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-simple";
       reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
       clocks = <&clk_32768_ck>;
-- 
2.34.1