September 2021 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Sep 2 00:00:22 PDT 2021
Ending: Wed Sep 29 05:05:58 PDT 2021
Messages: 179

• [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards   Rouven Czerwinski
• [PATCH 0/9] ARM: i.MX8M: add nano support   Ahmad Fatoum
  • [PATCH 1/9] ARM: i.MX: add i.MX8MN (Nano) SoC support boilerplate   Ahmad Fatoum
  • [PATCH 2/9] clk: imx: add i.MX8MN (Nano) support   Ahmad Fatoum
  • [PATCH 6/9] ddr: imx8m: add i.MX8MN (Nano) support   Ahmad Fatoum
  • [PATCH 7/9] ddr: imx8m: ddrphy_train: add DDR4 support   Ahmad Fatoum
  • [PATCH 9/9] ARM: i.MX8MN: add i.MX8MN-EVK support   Ahmad Fatoum
• [PATCH 3/9] ARM: i.MX8MN: adapt early clock support   Ahmad Fatoum
• [PATCH 4/9] ARM: i.MX: extend drivers for i.MX8MN (Nano) support   Ahmad Fatoum
  • [PATCH 4/9] ARM: i.MX: extend drivers for i.MX8MN (Nano) support   Trent Piepho
    • [PATCH 4/9] ARM: i.MX: extend drivers for i.MX8MN (Nano) support   Ahmad Fatoum
• [PATCH 5/9] ARM: i.MX8MM: correct unrecognized fracpll frequency   Ahmad Fatoum
  • [PATCH 5/9] ARM: i.MX8MM: correct unrecognized fracpll frequency   Trent Piepho
    • [PATCH 5/9] ARM: i.MX8MM: correct unrecognized fracpll frequency   Ahmad Fatoum
      • [PATCH 5/9] ARM: i.MX8MM: correct unrecognized fracpll frequency   Trent Piepho
• [PATCH 8/9] scripts: imx: add i.MX8MN support to imx-image   Ahmad Fatoum
• [PATCH] ARM: i.MX8MP: bbu: use correct offset for eMMC boot partition   Ahmad Fatoum
• [PATCH] video: Fix broken bcm2835 fb driver   Daniel Brát
  • [PATCH] video: Fix broken bcm2835 fb driver   Roland Hieber
• [PATCH] common: Select CRC32 dependency for DEFAULT_ENVIRONMENT   Jules Maselbas
• [PATCH] Documentation: Replace ENTRY_POINT with ENTRY_FUNCTION   Jules Maselbas
  • [PATCH] Documentation: Typo fix in command example   Jules Maselbas
    • [PATCH] Documentation: Typo fix in command example   Jules Maselbas
• [PATCH 0/2] usb: dwc2: fix phy dependecy   Daniel Brát
  • [PATCH 1/2] usb: dwc2: Make having a phy optional   Daniel Brát
    • [PATCH 1/2] usb: dwc2: Make having a phy optional   Jules Maselbas
      • [PATCH 1/2 v2] usb: dwc2: Make having a phy optional   Daniel Brát
  • [PATCH 2/2] ARM: rpi_defconfig: Enable PHY core for dwc2 usb driver   Daniel Brát
• [RFC PATCH] usb: gadget: dfu: Rework dfu command to use usbgadget   Anže Lešnik
  • [RFC PATCH] usb: gadget: dfu: Rework dfu command to use usbgadget   Ahmad Fatoum
    • [RFC PATCH] usb: gadget: dfu: Rework dfu command to use usbgadget   Anže Lešnik
  • [RFC PATCH] usb: gadget: dfu: Rework dfu command to use usbgadget   Ahmad Fatoum
• [PATCH] kbuild: dtc: Allow adding device tree fragments via config   Trent Piepho
  • [PATCH] kbuild: dtc: Allow adding device tree fragments via config   Ahmad Fatoum
    • [PATCH] kbuild: dtc: Allow adding device tree fragments via config   Trent Piepho
      • [PATCH] kbuild: dtc: Allow adding device tree fragments via config   Ahmad Fatoum
      • [PATCH] kbuild: dtc: Allow adding device tree fragments via config   Trent Piepho
      • [PATCH] kbuild: dtc: Allow adding device tree fragments via config   Ahmad Fatoum
• [PATCH v1 1/8] ARM: dts: skov-imx6: add USB nodes   Oleksij Rempel
  • [PATCH v1 2/8] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node   Oleksij Rempel
  • [PATCH v1 3/8] ARM: boards: skov-imx6: add switch detection   Oleksij Rempel
  • [PATCH v1 4/8] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected   Oleksij Rempel
  • [PATCH v1 5/8] ARM: boards: skov-imx6: fixup different DTS variants   Oleksij Rempel
  • [PATCH v1 7/8] ARM: boards: skov-imx6: set net.ifup_force_detect if no switch is detected   Oleksij Rempel
• [PATCH v1 6/8] ARM: boards: skov-imx6: start using deep-probe   Oleksij Rempel
• [PATCH v1 8/8] ifup: optimize net boot time for USB ethernet adapters   Oleksij Rempel
  • [PATCH v1 8/8] ifup: optimize net boot time for USB ethernet adapters   Lucas Stach
    • [PATCH v1 8/8] ifup: optimize net boot time for USB ethernet adapters   Oleksij Rempel
      • [PATCH v1 8/8] ifup: optimize net boot time for USB ethernet adapters   Lucas Stach
• barebox environment early loading   Dusan Radic
  • barebox environment early loading   Oleksij Rempel
• [PATCH v2 1/7] ARM: dts: skov-imx6: add USB nodes   Oleksij Rempel
  • [PATCH v2 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node   Oleksij Rempel
  • [PATCH v2 3/7] ARM: boards: skov-imx6: add switch detection   Oleksij Rempel
  • [PATCH v2 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected   Oleksij Rempel
  • [PATCH v2 5/7] ARM: boards: skov-imx6: fixup different DTS variants   Oleksij Rempel
  • [PATCH v2 6/7] ARM: boards: skov-imx6: start using deep-probe   Oleksij Rempel
  • [PATCH v2 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script   Oleksij Rempel
• [PATCH v2] usb: gadget: dfu: Rework dfu command to use usbgadget   Jules Maselbas
• [PATCH 0/3] arm: zynqmp: add support for zcu106 and boot sources   Michael Riesch
  • [PATCH 1/3] arm: zynqmp: add support for xilinx zcu106 board   Michael Riesch
  • [PATCH 2/3] Documentation: boards: zynqmp: fix broken links   Michael Riesch
  • [PATCH 3/3] arm: zynqmp: add boot source support   Michael Riesch
    • [PATCH 3/3] arm: zynqmp: add boot source support   Michael Tretter
      • [PATCH 3/3] arm: zynqmp: add boot source support   Michael Riesch
      • [PATCH 3/3] arm: zynqmp: add boot source support   Ahmad Fatoum
      • [PATCH 3/3] arm: zynqmp: add boot source support   Michael Riesch
• [PATCH master] base: driver: fix double removal of child devices   Ahmad Fatoum
  • [PATCH master] base: driver: fix double removal of child devices   Jules Maselbas
    • [PATCH master] base: driver: fix double removal of child devices   Ahmad Fatoum
• [PATCH master] blspec: fix use-after-free of firmware search path   Ahmad Fatoum
• [PATCH] fs: remove unused struct fs_device_d::parent_device   Ahmad Fatoum
  • [PATCH] fs: remove unused struct fs_device_d::parent_device   Roland Hieber
    • [PATCH] fs: remove unused struct fs_device_d::parent_device   Ahmad Fatoum
      • [PATCH] fs: remove unused struct fs_device_d::parent_device   Roland Hieber
• [PATCH] net: add virtio network driver   Ahmad Fatoum
  • [PATCH] fixup! net: add virtio network driver   Ahmad Fatoum
• [PATCH master v2] base: driver: fix double removal of child devices   Ahmad Fatoum
• [PATCH v2 0/3] arm: zynqmp: add support for zcu106 and boot sources   Michael Riesch
  • [PATCH v2 1/3] arm: zynqmp: add support for xilinx zcu106 board   Michael Riesch
  • [PATCH v2 2/3] Documentation: boards: zynqmp: fix broken links   Michael Riesch
  • [PATCH v2 3/3] arm: zynqmp: add boot source support   Michael Riesch
• [PATCH 0/2] gpio: add driver for xilinx zynq and zynqmp   Michael Riesch
  • [PATCH 1/2] gpio: add driver for xilinx zynq and zynqmp   Michael Riesch
    • [PATCH 1/2] gpio: add driver for xilinx zynq and zynqmp   Ahmad Fatoum
  • [PATCH 2/2] arm: dts: zynqmp: add alias gpio0 to zcu104 and zcu106 boards   Michael Riesch
    • [PATCH 2/2] arm: dts: zynqmp: add alias gpio0 to zcu104 and zcu106 boards   Ahmad Fatoum
• [PATCH v1] net: dhcp: send current hostname as part of the DHCP request   Oleksij Rempel
• [PATCH v1] net: dhcp: set default DHCP vendor ID to "barebox"   Oleksij Rempel
• [PATCH] mci: Improve error message for non-existent vmmc regulator   Uwe Kleine-König
  • [PATCH] mci: Improve error message for non-existent vmmc regulator   Rouven Czerwinski
• [PATCH 1/4] common: remove !SANDBOX dependency for target tools   Ahmad Fatoum
  • [PATCH 3/4] scripts: unify libusb.h inclusion   Ahmad Fatoum
    • [PATCH 3/4] scripts: unify libusb.h inclusion   Trent Piepho
      • [PATCH 3/4] scripts: unify libusb.h inclusion   Ahmad Fatoum
• [PATCH 2/4] common: add new menu for target tools   Ahmad Fatoum
  • [PATCH 2/4] common: add new menu for target tools   Roland Hieber
• [PATCH 4/4] scripts: allow building USB loader tools for target as well   Ahmad Fatoum
  • [PATCH 4/4] scripts: allow building USB loader tools for target as well   Trent Piepho
    • [PATCH 4/4] scripts: allow building USB loader tools for target as well   Ahmad Fatoum
      • [PATCH 4/4] scripts: allow building USB loader tools for target as well   Trent Piepho
      • [PATCH 4/4] scripts: allow building USB loader tools for target as well   Ahmad Fatoum
  • [PATCH 4/4] scripts: allow building USB loader tools for target as well   Enrico Jörns
• [PATCH 1/5] common: machine_id: support /chosen/barebox, machine-id-path override   Ahmad Fatoum
• [PATCH v2] console: add new CONFIG_CONSOLE_DISABLE_INPUT option   Ahmad Fatoum
  • [PATCH v2] console: add new CONFIG_CONSOLE_DISABLE_INPUT option   Christian Melki
• New RISCV board (cartesi-machine)   Marcelo Politzer
  • New RISCV board (cartesi-machine)   Ahmad Fatoum
    • New RISCV board (cartesi-machine)   Marcelo Politzer
      • New RISCV board (cartesi-machine)   Ahmad Fatoum
      • New RISCV board (cartesi-machine)   Marcelo Politzer
      • New RISCV board (cartesi-machine)   Ahmad Fatoum
      • New RISCV board (cartesi-machine)   Marcelo Politzer
• [PATCH] arm64: Don't truncate upper 32 bits in ENTRY_FUNCTION arg registers   Uwe Kleine-König
• [PATCH master] virtio: implement remove callbacks   Ahmad Fatoum
• [PATCH master] RISC-V: board-dt-2nd: move low level init into nonnaked function   Ahmad Fatoum
• [PATCH] RISC-V: virt: support poweroff/restart on tinyemu   Ahmad Fatoum
• [PATCH] ARM: document arm_stack_setup() pitfalls   Ahmad Fatoum
• [PATCH 1/2] mci-bcm2835: Don't block infinitely while waiting for a command completion   Uwe Kleine-König
  • [PATCH 2/2] mci-bcm2835: Fix return type handling of bcm2835_mci_wait_command_done()   Uwe Kleine-König
• [PATCH v2] ARM: document arm_setup_stack() pitfalls   Ahmad Fatoum
  • [PATCH v2] ARM: document arm_setup_stack() pitfalls   Jules Maselbas
  • [PATCH v2] ARM: document arm_setup_stack() pitfalls   Uwe Kleine-König
• [PATCH 1/2] pinctrl: bcm2835: Probe driver earlier   Uwe Kleine-König
  • [PATCH 2/2] pinctrl: bcm2835: Add support for bcm2711   Uwe Kleine-König
    • [PATCH 2/2] pinctrl: bcm2835: Add support for bcm2711   Roland Hieber
    • [PATCH 2/2] pinctrl: bcm2835: Add support for bcm2711   Ahmad Fatoum
  • [PATCH 1/2] pinctrl: bcm2835: Probe driver earlier   Ahmad Fatoum
• [PATCH v3] ARM: document arm_setup_stack() pitfalls   Ahmad Fatoum
• [PATCH v2 1/4] common: remove !SANDBOX dependency for target tools   Ahmad Fatoum
• [PATCH v2 2/4] common: add new menu for target tools   Ahmad Fatoum
• [PATCH v2 3/4] scripts: omap3-usb-loader: make proper use of pkg-config --cflags   Ahmad Fatoum
• [PATCH v2 4/4] scripts: allow building USB loader tools for target as well   Ahmad Fatoum
• at91 sama5d3 "regressions"   Peter Rosin
  • [PATCH 1/4] common.h: reintroduce region_overlap() as, old_region_overlap()   Peter Rosin
  • [PATCH 2/4] ARM: copy data if there is a region overlap   Peter Rosin
  • [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"   Peter Rosin
    • [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"   Rouven Czerwinski
      • [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"   Peter Rosin
      • [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"   Peter Rosin
      • [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"   Ahmad Fatoum
      • [PATCH 3/4] Revert "ARM: mmu: use client domain permissions to support ARMv7 eXecute Never"   Peter Rosin
  • [PATCH 4/4] lds: the RO_DATA_SECTION macro does not work on my SAMA5D3 board   Peter Rosin
  • at91 sama5d3 "regressions"   Peter Rosin
    • at91 sama5d3 "regressions"   Peter Rosin
      • at91 sama5d3 "regressions"   Ahmad Fatoum
      • at91 sama5d3 "regressions"   Peter Rosin
• [PATCH v3 0/7] add noswitch support for skov boards   Oleksij Rempel
  • [PATCH v3 1/7] ARM: dts: skov-imx6: add USB nodes   Oleksij Rempel
  • [PATCH v3 2/7] ARM: boards: skov-imx6: fixup_machine_compatible() add optional root node   Oleksij Rempel
  • [PATCH v3 3/7] ARM: boards: skov-imx6: add switch detection   Oleksij Rempel
  • [PATCH v3 4/7] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected   Oleksij Rempel
  • [PATCH v3 5/7] ARM: boards: skov-imx6: fixup different DTS variants   Oleksij Rempel
  • [PATCH v3 6/7] ARM: boards: skov-imx6: start using deep-probe   Oleksij Rempel
• [PATCH v3 7/7] ARM: boards: skov-imx6: add defaultenv with eth1-discover script   Oleksij Rempel
• CRC32 verification on NAND flash   Yunus Bas
  • CRC32 verification on NAND flash   Trent Piepho
    • CRC32 verification on NAND flash   Yunus Bas
• [PATCH 0/5] ARM: at91: sama5d3_xplained: migrate to DT   Ahmad Fatoum
  • [PATCH master 1/5] fs: fat: pbl: support >32M alignment for first partition   Ahmad Fatoum
  • [PATCH master 2/5] ARM: at91: at91sam9263ek: add device tree check for board code   Ahmad Fatoum
  • [PATCH 5/5] ARM: AT91: migrate sama5d3-xplained to DT   Ahmad Fatoum
• [PATCH 3/5] Documentation: boards: at91: remove done TODOs   Ahmad Fatoum
  • [PATCH 3/5] Documentation: boards: at91: remove done TODOs   Sam Ravnborg
• [PATCH 4/5] ARM: at91: sam9_smc: register driver earlier   Ahmad Fatoum
• [PATCH master 1/2] startup: don't read glob_t if glob("/env/init/*") fails   Ahmad Fatoum
  • [PATCH master 2/2] common: menutree: prevent read of uninitialized memory in error path   Ahmad Fatoum
• [PATCH] Documentation: reboot-mode: add note about /env/bmode   Ahmad Fatoum
• [PATCH master] power: reset: nvmem-reboot-mode: disable device tree fixup   Ahmad Fatoum
• [PATCH v2] Documentation: reboot-mode: add note about /env/bmode   Ahmad Fatoum
• [PATCH] ARM: at91: sama5d27_som1_ek: populate MAC address from EEPROM   Ahmad Fatoum
• [PATCH v2 1/1] kbuild: dtc: Allow adding device tree fragments via config   Trent Piepho
• [PATCH 1/1] ddr: imx8m: Rework ddrphy code and fix DDR-1067 on iMX8MM   Trent Piepho
  • [PATCH 1/1] ddr: imx8m: Rework ddrphy code and fix DDR-1067 on iMX8MM   Ahmad Fatoum
• Fwd: [PATCH] serial: implement riscv SBI console support   Marcelo Politzer
  • Fwd: [PATCH] serial: implement riscv SBI console support   Antony Pavlov
    • Fwd: [PATCH] serial: implement riscv SBI console support   Marcelo Politzer
• [PATCH v=2] serial: implement riscv SBI console support   Marcelo Politzer
• [PATCH] pbl/Kconfig: fix typo "inflluences" -> "influences"   Jules Maselbas

Last message date: Wed Sep 29 05:05:58 PDT 2021
Archived on: Wed Sep 29 05:06:34 PDT 2021

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...