[PATCH v1 4/8] ARM: boards: skov-imx6: disable eth0 for barebox if no switch is detected

[Oleksij Rempel]

Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
---
 arch/arm/boards/skov-imx6/board.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boards/skov-imx6/board.c b/arch/arm/boards/skov-imx6/board.c
index 2bd21adaeb..c4665c2b45 100644
--- a/arch/arm/boards/skov-imx6/board.c
+++ b/arch/arm/boards/skov-imx6/board.c
@@ -540,6 +540,7 @@ static void skov_init_board(const struct board_description *variant)
 static int skov_switch_test(void)
 {
 	struct phy_device *phydev;
+	struct device_d *eth0;
 	struct mii_bus *mii;
 	int ret;
 
@@ -568,6 +569,15 @@ no_switch:
 
 	pr_notice("No-switch variant is detected\n");
 
+	eth0 = get_device_by_name("eth0");
+	if (eth0) {
+		ret = dev_set_param(eth0, "mode", "disabled");
+		if (ret)
+			pr_warn("Can't set eth0 mode\n");
+	} else {
+		pr_warn("Can't disable eth0\n");
+	}
+
 	return 0;
 }
 late_initcall(skov_switch_test);
-- 
2.30.2