July 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Jul 1 18:53:06 EDT 2012
Ending: Tue Jul 31 15:45:42 EDT 2012
Messages: 591

• [PATCH] i.MX53 boards: notify clocksource after init_lowlevel   Wjatscheslaw Stoljarski (Slawa)
• [PATCH] Add JTAG bitbang driver   Wjatscheslaw Stoljarski (Slawa)
• [PATCH] Add JTAG bitbang driver   Wjatscheslaw Stoljarski (Slawa)
• [PATCH] ARM i.MX53: notify clocksource about changing clock   Wjatscheslaw Stoljarski (Slawa)
• [PATCH 0/3] ppc: Freescale TSEC driver.   Renaud Barbier
• [PATCH 1/3] ppc: GIANFAR base address definition   Renaud Barbier
• [PATCH 2/3] net: GIANFAR driver   Renaud Barbier
• [PATCH 3/3] ppc: P2020RDB Ethernet configuration   Renaud Barbier
• [PATCH/Master] ARM/MXS: the GPIO bitkeeper enable logic is inverse to the pullup enable logic   Juergen Beisert
• [PATCHv3] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 1/4] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 2/4] ARM/Samsung: add support to detect the reset source   Juergen Beisert
• [PATCH 3/4] ARM/i.MX: add support to detect the reset source   Juergen Beisert
• [PATCH 4/4] ARM/MXS: add reset cause detection   Juergen Beisert
• [PATCH 4/4] ARM/MXS: add reset cause detection   Juergen Beisert
• [PATCHv4] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 1/4] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 2/4] ARM/Samsung: add support to detect the reset source   Juergen Beisert
• [PATCH 3/4] ARM/i.MX: add support to detect the reset source   Juergen Beisert
• [PATCH 4/4] ARM/MXS: add reset cause detection   Juergen Beisert
• [RFC] Inclusion of the Samsung S3C6410 SoC   Juergen Beisert
• [PATCH 01/18] ARM/Samsung: be able to include the nand header multiple times   Juergen Beisert
• [PATCH 02/18] ARM/Samsung: unify device registration for the S3C24XX SoCs   Juergen Beisert
• [PATCH 03/18] ARM/Samsung: follow the name style of the other source files in this directory   Juergen Beisert
• [PATCH 04/18] Samsung/serial: remove more ugly ifdef lines   Juergen Beisert
• [PATCH 05/18] Samsung/serial: make the clock source configureable   Juergen Beisert
• [PATCH 06/18] Samsung/serial: make the code more readable   Juergen Beisert
• [PATCH 07/18] Samsung/serial: there is no need to ifdef these register defines   Juergen Beisert
• [PATCH 08/18] Samsung/serial: there is no need to ifdef the slot table   Juergen Beisert
• [PATCH 09/18] Samsung/serial: move the decision about an improved UART into Kconfig   Juergen Beisert
• [PATCH 10/18] Samsung/serial: unify UCON register settings   Juergen Beisert
• [PATCH 11/18] ARM/Samsung: add generic lowlevel init   Juergen Beisert
• [PATCH 12/18] ARM/Samsung: add S3C6410 SoC iomap   Juergen Beisert
• [PATCH 13/18] ARM/Samsung: adapt the generic timer driver to support the S3C6410 SoC   Juergen Beisert
• [PATCH 14/18] ARM/Samsung: add the clock tree support for the S3C6410 SoC   Juergen Beisert
• [PATCH 15/18] ARM/Samsung: add GPIO handling support for the S3C6410 SoC   Juergen Beisert
• [PATCH 16/18] ARM/Samsung: add generic S3C6410 SoC specific functions   Juergen Beisert
• [PATCH 17/18] ARM/Samsung: add the S3C6410 SoC   Juergen Beisert
• [PATCH 18/18] ARM/Samsung: add the Mini6410 platform as the first user of the S3C6410 SoC   Juergen Beisert
• [PATCH 02/18] ARM/Samsung: unify device registration for the S3C24XX SoCs   Juergen Beisert
• [PATCHv5] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 1/4] Enable a way to provide the reason for "being here"   Juergen Beisert
• [PATCH 2/4] ARM/Samsung: add support to detect the reset source   Juergen Beisert
• [PATCH 3/4] ARM/i.MX: add support to detect the reset source   Juergen Beisert
• [PATCH 4/4] ARM/MXS: add reset cause detection   Juergen Beisert
• Board's naming style   Juergen Beisert
• [PATCH] ARM: add the vendor 'FriendlyARM' to its board's directory names   Juergen Beisert
• [PATCH] ARM/Samsung: add the vendor FriendlyARM to the board's directory name   Juergen Beisert
• [PATCH/master] ARM/Samsung: A required fix and a cleanup   Juergen Beisert
• [PATCH 1/3] ARM/Samsung: be able to include the nand header multiple times   Juergen Beisert
• [PATCH 2/3] ARM/Samsung: unify device registration for the S3C24XX SoCs   Juergen Beisert
• [PATCH 3/3] NAND/Samsung: remove a leftover from architeture clean ups   Juergen Beisert
• [PATCH/master] ARM/MXS: pull-up and bitkeeper must be handled differently   Juergen Beisert
• [PATCH] ARM/Samsung: more clean up...   Juergen Beisert
• [PATCH 1/9] ARM/Samsung: List only really supported S3C24xx SoCs   Juergen Beisert
• [PATCH 2/9] ARM/Samsung: follow the name style of the other source files in this directory   Juergen Beisert
• [PATCH 3/9] Samsung/serial: remove more ugly ifdef lines   Juergen Beisert
• [PATCH 4/9] Samsung/serial: make the code more readable   Juergen Beisert
• [PATCH 5/9] Samsung/serial: there is no need to ifdef these register defines   Juergen Beisert
• [PATCH 6/9] Samsung/serial: there is no need to ifdef the slot table   Juergen Beisert
• [PATCH 7/9] Samsung/serial: move the decision about an improved UART into Kconfig   Juergen Beisert
• [PATCH 8/9] Samsung/serial: unify UCON register settings   Juergen Beisert
• [PATCH 9/9] Samsung/serial: make the clock source configureable   Juergen Beisert
• [PATCH] Addd the Samsung S3C6410 SoC to Barebox   Juergen Beisert
• [PATCH 1/8] ARM/Samsung: add S3C6410 SoC iomap   Juergen Beisert
• [PATCH 2/8] ARM/Samsung: adapt the generic timer driver to support the S3C6410 SoC   Juergen Beisert
• [PATCH 3/8] ARM/Samsung: add the clock tree support for the S3C6410 SoC   Juergen Beisert
• [PATCH 4/8] ARM/Samsung: add GPIO handling support for the S3C6410 SoC   Juergen Beisert
• [PATCH 5/8] ARM/Samsung: add generic S3C6410 SoC specific functions   Juergen Beisert
• [PATCH 6/8] ARM/Samsung: add the S3C6410 SoC   Juergen Beisert
• [PATCH 7/8] ARM/Samsung: add the Mini6410 platform as the first user of the S3C6410 SoC   Juergen Beisert
• [PATCH 8/8] ARM/Samsung: add the Tiny6410 platform as the second user of the S3C6410 SoC   Juergen Beisert
• [PATCH] ARM/Samsung: remaining clean up...   Juergen Beisert
• [PATCH 1/3] Samsung/serial: move the decision about an improved UART into Kconfig   Juergen Beisert
• [PATCH 2/3] Samsung/serial: unify UCON register settings   Juergen Beisert
• [PATCH 3/3] Samsung/serial: make the clock source configureable   Juergen Beisert
• Way to clear nand bad block table   Juergen Beisert
• [PATCH RFC] arm/imx: provide command to add ram device with autodetected size   Juergen Beisert
• Barebox crashes when the first console should stop   Juergen Beisert
• RFC: How to setup and handle NAND flashes in Barebox   Juergen Beisert
• [PATCH] omap: use 512k barebox partition   Juergen Beisert
• [PATCHv2] Add the Samsung S3C6410 SoC to Barebox   Juergen Beisert
• [PATCH 1/8] ARM/Samsung: add S3C6410 SoC iomap   Juergen Beisert
• [PATCH 2/8] ARM/Samsung: adapt the generic timer driver to support the S3C6410 SoC   Juergen Beisert
• [PATCH 3/8] ARM/Samsung: add the clock tree support for the S3C6410 SoC   Juergen Beisert
• [PATCH 4/8] ARM/Samsung: add GPIO handling support for the S3C6410 SoC   Juergen Beisert
• [PATCH 5/8] ARM/Samsung: add generic S3C6410 SoC specific functions   Juergen Beisert
• [PATCH 6/8] ARM/Samsung: add the S3C6410 SoC   Juergen Beisert
• [PATCH 7/8] ARM/Samsung: add the Mini6410 platform as a user of the S3C6410 SoC   Juergen Beisert
• [PATCH 8/8] ARM/Samsung: add the Tiny6410 platform as a user of the S3C6410 SoC   Juergen Beisert
• [PATCH 2/8] ARM/Samsung: adapt the generic timer driver to support the S3C6410 SoC   Juergen Beisert
• Barebox hangs after boot   Juergen Beisert
• [PATCH] omap: use 512k barebox partition   Juergen Beisert
• [PATCH] omap: use 512k barebox partition   Juergen Beisert
• [PATCH 00/12 v3] Add Pre-Bootloader support   Juergen Beisert
• [PATCH 00/12 v3] Add Pre-Bootloader support   Juergen Beisert
• [PATCH 2/3] defenv-2: Add usage information for bootargs scripts   Eric Bénard
• [PATCH 1/3] string: add strim for ONFI code   Eric Bénard
• [PATCH 2/3] nand_base: add ONFI flash detection   Eric Bénard
• [PATCH 3/3] nand_imx: update to support onfi & 4k flashs   Eric Bénard
• [PATCH 2/3] nand_base: add ONFI flash detection   Eric Bénard
• [PATCH] ARM: Enable unaligned accesses on armv6 and later   Eric Bénard
• barebox image size   Eric Bénard
• tx51 ethernet regression   Eric Bénard
• barebox image size   Eric Bénard
• [ANNOUNCE] Barebox Logo   Eric Bénard
• starting ethernet switch in SMI mode   Vanalme Filip
• [PATCH 0/2] Very minimal support S5PV210 board (Tiny210)   Alexey Galakhov
• [PATCH 1/2] S5P DRAM support   Alexey Galakhov
• [PATCH 2/2] Add FriendlyArm Tiny210 board (S5PV210)   Alexey Galakhov
• Barebox hangs after boot   Alexey Galakhov
• Barebox hangs after boot   Alexey Galakhov
• Barebox hangs after boot   Alexey Galakhov
• [PATCH] scripts/checkpatch.pl: reset rpt_cleaners warnings   Teresa Gámez
• [PATCH] OMAP4: small header cleanup   Teresa Gámez
• [PATCH] defaultenv-2: Add bootargs for booting from disk   Teresa Gámez
• [PATCHv2] defaultenv-2: Add bootargs for booting from disk   Teresa Gámez
• panda board crash when detecting usb devices   Sascha Hauer
• [PATCH] commands: uncompress: fix description   Sascha Hauer
• v2012.07.0   Sascha Hauer
• [PATCH] Unused files removed   Sascha Hauer
• [PATCH] Avoid SDRAM access crash   Sascha Hauer
• [PATCH 1/2] Add support for kernel and device tree images stored in a partition   Sascha Hauer
• [PATCH] fs: fix standard zero, full devices   Sascha Hauer
• [PATCH] fs: fix standard zero, full devices   Sascha Hauer
• [PATCH] ARM i.MX51 babbage: Use correct select for new environment   Sascha Hauer
• [PATCH] ARM tqma53: Add standard flash header   Sascha Hauer
• [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board   Sascha Hauer
• [PATCH] ARM tqma53: switch to new environment   Sascha Hauer
• [PATCH] Avoid SDRAM access crash   Sascha Hauer
• [PATCH 0/2] Very minimal support S5PV210 board (Tiny210)   Sascha Hauer
• [PATCH] scripts/mkublheader: add program to produce an UBL image header   Sascha Hauer
• [PATCH] ARM mxs: Clear USB boot mode during startup   Sascha Hauer
• starting ethernet switch in SMI mode   Sascha Hauer
• [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module   Sascha Hauer
• [PATCH] mem md: bail out without arguments   Sascha Hauer
• [PATCH] defenv-2 updates   Sascha Hauer
• [PATCH 1/3] hush getopt: shift argv arguments   Sascha Hauer
• [PATCH 2/3] defenv-2: Add usage information for bootargs scripts   Sascha Hauer
• [PATCH 3/3] defenv-2: improve boot script   Sascha Hauer
• [PATCH 2/3] defenv-2: Add usage information for bootargs scripts   Sascha Hauer
• [PATCH 2/3] nand_base: add ONFI flash detection   Sascha Hauer
• [PATCH 1/3] USB: Fix typo tranceiver -> transceiver   Sascha Hauer
• [PATCH 2/3] ARM: remove mx1ads leftovers   Sascha Hauer
• [PATCH 3/3] mtd: remove dead disk-on-chip support   Sascha Hauer
• [PATCH 01/30] USB: Fix typo tranceiver -> transceiver   Sascha Hauer
• [PATCH 02/30] ARM: let armlinux_set_* depend on the correct option   Sascha Hauer
• [PATCH 03/30] bootm: Fix undefined reference to of_fix_tree   Sascha Hauer
• [PATCH 04/30] uimage: introduce UIMAGE Kconfig symbol   Sascha Hauer
• [PATCH 05/30] ARM at91rm9200: Add missing include   Sascha Hauer
• [PATCH 06/30] Add missing semicolons at end of EXPORT_SYMBOL   Sascha Hauer
• [PATCH 07/30] exec command: Fix compilation   Sascha Hauer
• [PATCH 08/30] input gpio buttons: needs poller API   Sascha Hauer
• [PATCH 09/30] loadb: fix compilation   Sascha Hauer
• [PATCH 10/30] mfd TWL4030: Fix Kconfig dependencies   Sascha Hauer
• [PATCH 11/30] pwm PXA: Compile only on PXA   Sascha Hauer
• [PATCH 12/30] fs nfs: depend on net   Sascha Hauer
• [PATCH 13/30] mtd nand: Fix compilation without bbt support   Sascha Hauer
• [PATCH 14/30] led: remove gpio include   Sascha Hauer
• [PATCH 15/30] kconfig: fix IS_ENABLED to not require all options to be defined   Sascha Hauer
• [PATCH 16/30] ARM Samsung S5P: Disable support until we have a board   Sascha Hauer
• [PATCH 17/30] gpio: add static inlines for gpio_request/gpio_free   Sascha Hauer
• [PATCH 18/30] ARM: remove mx1ads leftovers   Sascha Hauer
• [PATCH 19/30] usb gadget at91: Use correct include   Sascha Hauer
• [PATCH 20/30] usb gadget: Enable gadget support only when a driver is available   Sascha Hauer
• [PATCH 21/30] ARM i.MX: rename internal-nand-boot.c to external-nand-boot.c   Sascha Hauer
• [PATCH 22/30] ARM i.MX: No external NAND boot on i.MX1   Sascha Hauer
• [PATCH 23/30] mtd: remove dead disk-on-chip support   Sascha Hauer
• [PATCH 24/30] mtd omap: add prefix to omap specific decode_bch function   Sascha Hauer
• [PATCH 25/30] ARM at91: remove const   Sascha Hauer
• [PATCH 26/30] ARM at91: fix typo in define   Sascha Hauer
• [PATCH 27/30] uimage: select uncompress and crc32 support   Sascha Hauer
• [PATCH 28/30] I2C i.MX: disable driver for i.MX1   Sascha Hauer
• [PATCH 29/30] mtd: scan_write_bbt is only needed with mtd write support   Sascha Hauer
• [PATCH 30/30] UBI: select crc32 support   Sascha Hauer
• [PATCH 01/30] USB: Fix typo tranceiver -> transceiver   Sascha Hauer
• [PATCH] ARM: Enable unaligned accesses on armv6 and later   Sascha Hauer
• [PATCH] mtd: fix bad block ioctls   Sascha Hauer
• [PATCH] MIPS: malta: register memory bank   Sascha Hauer
• [PATCH] MIPS: remove unused processor-specific constants and macros   Sascha Hauer
• [PATCH 1/3] string: add strim for ONFI code   Sascha Hauer
• [PATCH v2] mtd: fix 'write: Invalid argument' while writing to nand-bb devices   Sascha Hauer
• [PATCH] usb: gadget: enable for MXS   Sascha Hauer
• [PATCH] filetype: add forgotten mips barebox filetype_str   Sascha Hauer
• [PATCH 05/18] Samsung/serial: make the clock source configureable   Sascha Hauer
• [PATCH 02/18] ARM/Samsung: unify device registration for the S3C24XX SoCs   Sascha Hauer
• [PATCH 11/18] ARM/Samsung: add generic lowlevel init   Sascha Hauer
• [PATCH 1/5] imx_fec: Allow driver clients to supply MAC address   Sascha Hauer
• [PATCH 4/5] at24: add I2C eeprom for 24cl02   Sascha Hauer
• Atmel AT91 SD/MMC clock too fast   Sascha Hauer
• [PATCH 1/4] Enable a way to provide the reason for "being here"   Sascha Hauer
• barebox image size   Sascha Hauer
• AT91SAM9263-EK   Sascha Hauer
• Antwort: Re: barebox image size   Sascha Hauer
• Antwort: Re: Antwort: Re: barebox image size   Sascha Hauer
• tx51 ethernet regression   Sascha Hauer
• [PATCH 1/2] tx51: ensure eth phy resets properly by driving reset pin explicitly.   Sascha Hauer
• [PATCH 2/2] tx51: Disable kallsyms. It prevents the board from booting.   Sascha Hauer
• [PATCH 2/2] tx51: Disable kallsyms. It prevents the board from booting.   Sascha Hauer
• [PATCH v2] usb: gadget: enable for MXS   Sascha Hauer
• [PATCH/Master] ARM/MXS: the GPIO bitkeeper enable logic is inverse to the pullup enable logic   Sascha Hauer
• [PATCH] arm: support booting of uimages with as barebox payload.   Sascha Hauer
• [PATCH] commands/crc: assert newline after output with big offsets   Sascha Hauer
• [PATCH 0/2] imx: add matrix keypad (kpp) input driver   Sascha Hauer
• Board's naming style   Sascha Hauer
• [PATCHv5] Enable a way to provide the reason for "being here"   Sascha Hauer
• AT91SAM9263-EK   Sascha Hauer
• [PATCH 2/3] gpmc: Add reset to gpmc_generic_init   Sascha Hauer
• [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC   Sascha Hauer
• Compressed barebox image support   Sascha Hauer
• [PATCH 1/9] lzo: Allow for static inlining   Sascha Hauer
• [PATCH 2/9] ARM lds: remove unused got   Sascha Hauer
• [PATCH 3/9] ARM: remove board linker script option   Sascha Hauer
• [PATCH 4/9] ARM: remove exception vectors from boards   Sascha Hauer
• [PATCH 5/9] ARM startup: calculate offset instead of runtime address   Sascha Hauer
• [PATCH 6/9] ARM ep93xx: Get rid of special handling in linker file   Sascha Hauer
• [PATCH 7/9] ARM boards: Use _text rather than TEXT_BASE   Sascha Hauer
• [PATCH 8/9] ARM: Separate assembler functions into their own section   Sascha Hauer
• [PATCH 9/9] Add compressed image support   Sascha Hauer
• [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC   Sascha Hauer
• [PATCH] pca-a-l1: added memory device for int. 60kB RAM.   Sascha Hauer
• [PATCH 8/9] ARM: Separate assembler functions into their own section   Sascha Hauer
• [PATCH] Fix compile error loady command, without loadb.   Sascha Hauer
• Compressed barebox image support   Sascha Hauer
• USB On PCM043?   Sascha Hauer
• [PATCH 9/9] Add compressed image support   Sascha Hauer
• [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver   Sascha Hauer
• [PATCH 3/6] mc13xxx: Added dummy definition for mc13xxx_get() if CONFIG_MFD_MC13XXX is not set   Sascha Hauer
• [PATCH 6/6] PCM038: Read UID from fuses and pass this value to kernel as serial number   Sascha Hauer
• [PATCH 9/9] Add compressed image support   Sascha Hauer
• [PATCH 8/9] ARM: Separate assembler functions into their own section   Sascha Hauer
• [PATCH 2/3 v2] gpmc: Add reset to gpmc_generic_init   Sascha Hauer
• [PATCH] Added SDR-size auto detection.   Sascha Hauer
• [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver   Sascha Hauer
• [PATCH/master] ARM/Samsung: A required fix and a cleanup   Sascha Hauer
• Compressed barebox image support   Sascha Hauer
• [PATCH] serial_ns16550: change the driver's name   Sascha Hauer
• USB On PCM043?   Sascha Hauer
• [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver   Sascha Hauer
• [PATCH] ARM: add the vendor 'FriendlyARM' to its board's directory names   Sascha Hauer
• [PATCH 1/1] piggy.lzo.S: fix out of tree build   Sascha Hauer
• [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin   Sascha Hauer
• [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin   Sascha Hauer
• [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin   Sascha Hauer
• [PATCH 7/9] Samsung/serial: move the decision about an improved UART into Kconfig   Sascha Hauer
• [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin   Sascha Hauer
• [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin   Sascha Hauer
• [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin   Sascha Hauer
• [PATCH 8/9] ARM: Separate assembler functions into their own section   Sascha Hauer
• [PATCH 8/9] ARM: Separate assembler functions into their own section   Sascha Hauer
• Booting kernel from FAT partition on beagle board   Sascha Hauer
• [PATCH] Makefile: update barebox version if CONFIG_KALLSYMS is not set   Sascha Hauer
• [PATCH/master] ARM/MXS: pull-up and bitkeeper must be handled differently   Sascha Hauer
• [PATCH 1/3] mc13xxx: Added dummy definitions if CONFIG_MFD_MC13XXX is not set   Sascha Hauer
• [PATCH] ARM: move exception vector table to exceptions.S   Sascha Hauer
• [PATCH] ARM/Samsung: more clean up...   Sascha Hauer
• [PATCH] i.MX53 boards: notify clocksource after init_lowlevel   Sascha Hauer
• [PATCH] ARM/Samsung: remaining clean up...   Sascha Hauer
• [PATCH] scripts/checkpatch.pl: reset rpt_cleaners warnings   Sascha Hauer
• [PATCH] OMAP4: small header cleanup   Sascha Hauer
• [PATCH] ARM i.MX53: notify clocksource about changing clock   Sascha Hauer
• [PATCH] Add JTAG bitbang driver   Sascha Hauer
• [PATCH 1/4] vsprintf: fix EXPORT_SYMBOL typo on simple_strtoull   Sascha Hauer
• [PATCH] i2c: fix printf format specifier   Sascha Hauer
• [PATCHv2] defaultenv-2: Add bootargs for booting from disk   Sascha Hauer
• [PATCH 2/3] net: GIANFAR driver   Sascha Hauer
• [PATCH 3/3] ppc: P2020RDB Ethernet configuration   Sascha Hauer
• [PATCH] MIPS: add initial exceptions handling   Sascha Hauer
• Way to clear nand bad block table   Sascha Hauer
• [PATCH] MIPS: add initial exceptions handling   Sascha Hauer
• [PATCH RFC] arm/imx: provide command to add ram device with autodetected size   Sascha Hauer
• [PATCH] lib/Kconfig: Fix alignment of arrows in label   Sascha Hauer
• [PATCH] Add /dev/urandom device.   Sascha Hauer
• [PATCH] ARM/imx/pcm043: increase size of "self" partition   Sascha Hauer
• [PATCH 2/3] OMAP4460: ram init changes   Sascha Hauer
• [PATCH] omap: use 512k barebox partition   Sascha Hauer
• [PATCH] omap: use 512k barebox partition   Sascha Hauer
• [PATCH 1/1] arm: add debug_ll support   Sascha Hauer
• [PATCH 07/12] ARM: Separate assembler functions into their own section   Sascha Hauer
• [PATCH 08/12] decompress_unlzo: define decompress_unlzo as decompress   Sascha Hauer
• [PATCH 10/12] ARM: add early malloc support needed by the decompressor   Sascha Hauer
• [PATCH 08/12] decompress_unlzo: define decompress_unlzo as decompress   Sascha Hauer
• [PATCH 10/12] ARM: add early malloc support needed by the decompressor   Sascha Hauer
• [PATCH] omap: use 512k barebox partition   Sascha Hauer
• [PATCH 10/12] ARM: add early malloc support needed by the decompressor   Sascha Hauer
• [PATCH 10/12] ARM: add early malloc support needed by the decompressor   Sascha Hauer
• [PATCH] omap: use 512k barebox partition   Sascha Hauer
• at24 eeprom driver (V2) and misc patches   Sascha Hauer
• [PATCH 3/7] i2c: add platform_data for i2c_board_info   Sascha Hauer
• Antwort: Re: Re: Re: Re: nor flash board init code   Sascha Hauer
• x86 weirdness   Sascha Hauer
• x86 weirdness   Sascha Hauer
• [PATCH] m25p80 spi flash updates   Sascha Hauer
• [PATCH 1/6] nor m25p80: remove progression bar   Sascha Hauer
• [PATCH 2/6] nor m25p80: remove unused variables   Sascha Hauer
• [PATCH 3/6] nor m25p80: refactor chip erase   Sascha Hauer
• [PATCH 4/6] nor m25p80: align start and end to erase blocks   Sascha Hauer
• [PATCH 5/6] nor m25p80: optimize erase   Sascha Hauer
• [PATCH 6/6] nor m25p80: implement fast read   Sascha Hauer
• [PATCH] Freescale sabrelite support   Sascha Hauer
• [PATCH 1/4] SPI i.MX: Add support for i.MX6   Sascha Hauer
• [PATCH 2/4] ARM i.MX: Add support for internal serial boot mode   Sascha Hauer
• [PATCH 3/4] ARM i.MX: Add support for the Freescale i.MX6 sabrelite board   Sascha Hauer
• [PATCH 4/4] ARM i.MX: Add defconfig for Freescale i.MX6 Sabre Lite board   Sascha Hauer
• [PATCH] UBI work   Sascha Hauer
• [PATCH 1/2] ubi: cdev->write has to return the bytes read, not 0   Sascha Hauer
• [PATCH 2/2] ubi: align ubi writes to LEB size   Sascha Hauer
• [PATCH] mem md: make md -s /dev/something work again   Sascha Hauer
• Compressed barebox image support   Robert Jarzmik
• nor flash board init code   Franck Jullien
• nor flash board init code   Franck Jullien
• nor flash board init code   Franck Jullien
• nor flash board init code   Franck Jullien
• [PATCH 0/2] Misc Karo TX51 fixes   Christian Kapeller
• [PATCH 1/2] tx51: ensure eth phy resets properly by driving reset pin explicitly.   Christian Kapeller
• [PATCH 2/2] tx51: Disable kallsyms. It prevents the board from booting.   Christian Kapeller
• tx51 ethernet regression   Christian Kapeller
• [PATCH 0/2] imx: add matrix keypad (kpp) input driver   Christian Kapeller
• [PATCH 1/2] input: Add i.MX matrix keypad driver   Christian Kapeller
• [PATCH 2/2] input: add i.MX51 platform code for matrix keypad driver   Christian Kapeller
• tx51 ethernet regression   Christian Kapeller
• Antwort: Re: Antwort: Re: Antwort: Re: barebox image size   Christian Kapeller
• Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size   Christian Kapeller
• [PATCH 1/2] tx51: ensure eth phy resets properly by driving reset pin explicitly.   Christian Kapeller
• [PATCH 2/2] tx51: Disable kallsyms. It prevents the board from booting.   Christian Kapeller
• [PATCH] imx51: fix pad definition used for fec communication.   Christian Kapeller
• [PATCH] arm: support booting of uimages with as barebox payload.   Christian Kapeller
• [PATCH] arm: support booting of uimages with as barebox payload.   Christian Kapeller
• [PATCH] Fix compile error loady command, without loadb.   Christian Kapeller
• [PATCH] Makefile: update barebox version if CONFIG_KALLSYMS is not set   Svetlana Khafizova
• [PATCH] Added SDR-size auto detection.   Juergen Kilb
• [PATCH] omap_hsmmc: Hack allert! Add delay in omap_hsmmc.   Juergen Kilb
• [PATCH] pca-a-l1: added memory device for int. 60kB RAM.   Juergen Kilb
• [PATCH] phyCARD-A-L1: Create xload configuration.   Juergen Kilb
• [PATCH] Add /dev/urandom device.   Juergen Kilb
• [PATCH] add possibility to mark blocks as bad during write   Juergen Kilb
• [PATCH] pca-a-l1: added memory device for int. 60kB RAM.   Jürgen Kilb
• USB On PCM043?   Jerry Kirk
• USB On PCM043?   Jerry Kirk
• [PATCH 4/4] ARM/MXS: add reset cause detection   Marc Kleine-Budde
• [PATCH] usb: gadget: enable for MXS   Marc Kleine-Budde
• [PATCH v2] usb: gadget: enable for MXS   Marc Kleine-Budde
• [PATCH 8/9] ARM: Separate assembler functions into their own section   Marc Kleine-Budde
• Flashing automatically the default environment   Uwe Kleine-König
• Flashing automatically the default environment   Uwe Kleine-König
• [PATCH] commands/crc: assert newline after output with big offsets   Uwe Kleine-König
• [PATCH] i2c: fix printf format specifier   Uwe Kleine-König
• [PATCH RFC] arm/imx: provide command to add ram device with autodetected size   Uwe Kleine-König
• [PATCH] ARM/imx/pcm043: increase size of "self" partition   Uwe Kleine-König
• [PATCH 3/7] i2c: add platform_data for i2c_board_info   Uwe Kleine-König
• [PATCH 7/7] drivers/eeprom: at24: add I2C eeprom driver for 24c01/02   Uwe Kleine-König
• [PATCH] ARM/imx/pcm043: increase size of "self" partition   Uwe Kleine-König
• [PATCH v2] ARM/imx/pcm043: increase size of "self" partition   Uwe Kleine-König
• [ANNOUNCE] Barebox Logo   Uwe Kleine-König
• [PATCH] drivers/net/ksz8864rmn: add driver for Micrel KSZ8864RMN Ethernet Switch   Jan Luebbe
• [PATCH] mtd: fix 'write: Invalid argument' while writing to nand-bb devices   Jan Luebbe
• [PATCH v2] mtd: fix 'write: Invalid argument' while writing to nand-bb devices   Jan Luebbe
• panda board crash when detecting usb devices   Jan Lübbe
• panda board crash when detecting usb devices   Belisko Marek
• panda board crash when detecting usb devices   Belisko Marek
• panda board crash when detecting usb devices   Belisko Marek
• [PATCH 1/2] Add support for kernel and device tree images stored in a partition   Belisko Marek
• [ANNOUNCE] Barebox Logo   Belisko Marek
• [PATCH] defaultenv-2: Add bootargs for booting from disk   Roberto Nibali
• Flashing automatically the default environment   Michael Olbrich
• Flashing automatically the default environment   Michael Olbrich
• [PATCH] arm: support booting of uimages with as barebox payload.   Jean-Christophe PLAGNIOL-VILLARD
• AT91SAM9263-EK   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] ARM: Separate assembler functions into their own section   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] Add compressed image support   Jean-Christophe PLAGNIOL-VILLARD
• ST Chipsets support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] add possibility to mark blocks as bad during write   Jean-Christophe PLAGNIOL-VILLARD
• Compressed barebox image support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] piggy.lzo.S: fix out of tree build   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] Add compressed image support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7] compressed image update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7] compressed inmage update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] stddev: make it selectable via Kconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] decompress_unlzo: define decompress_unlzo as decompress   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] compressed image: factorise compressor type   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] decompressor: import malloc/free implementation for linux 3.4   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] ARM: add early malloc support needed by the decompressor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] compressed: allow to link only what is needed   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] compressed image: add gzip support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7 V2] compressed image update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] stddev: make it selectable via Kconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] decompress_unlzo: define decompress_unlzo as decompress   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] compressed image: factorise compressor type   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] decompressor: import malloc/free implementation for linux 3.4   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] ARM: add early malloc support needed by the decompressor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] compressed image: add gzip support   Jean-Christophe PLAGNIOL-VILLARD
• AT91SAM9263-ek - Kernel panic   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] compressed: rename barebox target to zbarebox and zbarebox.bin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] compressed: rename barebox target to zbarebox and zbarebox.bin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] vsprintf: fix EXPORT_SYMBOL typo on simple_strtoull   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] complete: add missing EXPORT_SYMBOL for {command, device, empty, command}_var_complete   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] version: add missing EXPORT_SYMBOL for version_string   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] command: add missing EXPORT_SYMBOL for find_cmd   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/11 V3] compressed image update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] vsprintf: fix EXPORT_SYMBOL typo on simple_strtoull   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/11] stddev: make it selectable via Kconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] decompress_unlzo: define decompress_unlzo as decompress   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/11] compressed image: factorise compressor type   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/11] decompressor: import malloc/free implementation for linux 3.4   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/11] ARM: add early malloc support needed by the decompressor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/11] compressed: rename barebox target to zbarebox and zbarebox.bin   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/11] compressed image: add gzip support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/11] kbuild: Init all relevant variables used in kbuild files so   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] kbuild: add comp-y target   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11] arm: use the new built-comp.o generated files   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/11] at91: add lowlevel init to the decompressor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] OMAP4460: ram init changes   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] OMAP4460: clock init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/12] Add Pre-Bootloader support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/12] kbuild: Init all relevant variables used in kbuild files so   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/12] kbuild: add pre-bootloader (pbl) target   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/12] Add pre-bootloader (pbl) image support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/12] pbl: discard unwind symbol if enable in barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/12] Add compressed image support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/12] only compress default env in uncompressed images   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/12] ARM: Separate assembler functions into their own section   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/12] decompress_unlzo: define decompress_unlzo as decompress   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/12] decompressor: import malloc/free implementation for linux 3.4   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/12] ARM: add early malloc support needed by the decompressor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/12] compressed image: add gzip support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/12] at91: add lowlevel init to the pbl   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 1/2] omap3: add pbl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] panda: add pbl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] arm: add debug_ll support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/12] Add Pre-Bootloader support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/15] kbuild: allow to have custom cppflags for pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 15/15] arm: allays enable the garbage collector for pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] nand: fix build error when BBT not enabled.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] i2c: device id default to -1 for auto assignment   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] nand: Prevent drivers setting NAND_USE_FLASH_BBT if BBT config not enabled.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/12] ARM: add early malloc support needed by the decompressor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/12] ARM: Separate assembler functions into their own section   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/12] ARM: add early malloc support needed by the decompressor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/12] ARM: add early malloc support needed by the decompressor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/12] ARM: add early malloc support needed by the decompressor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/12 v3] Add Pre-Bootloader support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/12] kbuild: Init all relevant variables used in kbuild files so   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/12] kbuild: add pre-bootloader (pbl) target   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/12] Add pre-bootloader (pbl) image support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/12] pbl: discard unwind symbol if enable in barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/12] Add compressed image support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/12] only compress default env in uncompressed images   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/12] decompressor: import malloc/free implementation for linux 3.4   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/12] ARM: add early malloc support needed by the decompressor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/12] compressed image: add gzip support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/12] at91: add lowlevel init to the pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/12] kbuild: allow to have custom cppflags for pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/12] arm: always enable the garbage collector for pbl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] gadget: fix Kconfig: move config under if   Jean-Christophe PLAGNIOL-VILLARD
• [ANNOUNCE] Barebox Logo   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/12 v3] Add Pre-Bootloader support   Jean-Christophe PLAGNIOL-VILLARD
• [ANNOUNCE] Barebox Logo   Jean-Christophe PLAGNIOL-VILLARD
• [ANNOUNCE] Barebox Logo   Jean-Christophe PLAGNIOL-VILLARD
• x86 weirdness   Jean-Christophe PLAGNIOL-VILLARD
• Flashing automatically the default environment   Patrick
• patch for SDRAM remap bug   Antony Pavlov
• [PATCH] MIPS: malta: register memory bank   Antony Pavlov
• [PATCH] MIPS: remove unused processor-specific constants and macros   Antony Pavlov
• [PATCH] filetype: add forgotten mips barebox filetype_str   Antony Pavlov
• [PATCH] serial_ns16550: change the driver's name   Antony Pavlov
• [WIP] add very basic ELF support on MIPS   Antony Pavlov
• [RFC 1/7] MIPS: move start.S code to .text_entry section   Antony Pavlov
• [RFC 2/7] MIPS: add the initial support for lowlevel init   Antony Pavlov
• [RFC 3/7] MIPS: malta: add bogus lowlevel init   Antony Pavlov
• [RFC 4/7] MIPS: malta: add YAMON-style GT64120 memory map   Antony Pavlov
• [RFC 5/7] MIPS: malta: make KSEG0 uncached   Antony Pavlov
• [RFC 6/7] MIPS: qemu-malta: add KSEG0 memory region   Antony Pavlov
• [RFC 7/7] bootm: add very basic ELF support on MIPS (stealed from kexec)   Antony Pavlov
• [RFC 4/7] MIPS: malta: add YAMON-style GT64120 memory map   Antony Pavlov
• [PATCH] Add JTAG bitbang driver   Antony Pavlov
• [PATCH] MIPS: add initial exceptions handling   Antony Pavlov
• [PATCH] MIPS: add initial exceptions handling   Antony Pavlov
• [PATCH 00/12 v3] Add Pre-Bootloader support   Thomas Petazzoni
• Atmel AT91 SD/MMC clock too fast   George Pontis
• Atmel AT91 SD/MMC clock too fast   George Pontis
• Patch for 16bit atmel NAND   Benoit RAT
• Various patches for imx35, fec, at24 driver and misc   Marc Reilly
• [PATCH 1/5] imx_fec: Allow driver clients to supply MAC address   Marc Reilly
• [PATCH 2/5] imx35: 6-bit divider helper   Marc Reilly
• [PATCH 3/5] imx35: mmc clock has 6 bit divider, not 3_3   Marc Reilly
• [PATCH 4/5] at24: add I2C eeprom for 24cl02   Marc Reilly
• [PATCH 5/5] misc: new driver: isl22316 digital potentiometer   Marc Reilly
• Antwort: Re: Antwort: Re: Antwort: Re: barebox image size   Marc Reilly
• Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size   Marc Reilly
• Way to clear nand bad block table   Marc Reilly
• Way to clear nand bad block table   Marc Reilly
• at24 eeprom driver (V2) and misc patches   Marc Reilly
• [PATCH 1/7] imx35: 6-bit divider helper   Marc Reilly
• [PATCH 2/7] imx35: mmc clock has 6 bit divider, not 3_3   Marc Reilly
• [PATCH 3/7] i2c: add platform_data for i2c_board_info   Marc Reilly
• [PATCH 4/7] i2c: device id default to -1 for auto assignment   Marc Reilly
• [PATCH 5/7] nand: fix build error when BBT not enabled.   Marc Reilly
• [PATCH 6/7] nand: Prevent drivers setting NAND_USE_FLASH_BBT if BBT config not enabled.   Marc Reilly
• [PATCH 7/7] drivers/eeprom: at24: add I2C eeprom driver for 24c01/02   Marc Reilly
• [PATCH 5/7] nand: fix build error when BBT not enabled.   Marc Reilly
• [PATCH 6/7] nand: Prevent drivers setting NAND_USE_FLASH_BBT if BBT config not enabled.   Marc Reilly
• [PATCH 7/7] drivers/eeprom: at24: add I2C eeprom driver for 24c01/02   Marc Reilly
• [PATCH 1/2] Add support for kernel and device tree images stored in a partition   Maxime Ripard
• [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board   Maxime Ripard
• [PATCH 1/2] Add support for kernel and device tree images stored in a partition   Maxime Ripard
• [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board   Maxime Ripard
• [PATCHv2 0/2] Add support for the Crystalfontz CFA-10036 module   Maxime Ripard
• [PATCH 1/2] Add bootargs script to boot on ext filesystems   Maxime Ripard
• [PATCH 2/2] Add support for the Crystalfontz CFA-10036 board   Maxime Ripard
• x86 weirdness   Erwin Rol
• x86 weirdness   Erwin Rol
• x86 weirdness   Erwin Rol
• x86 weirdness   Erwin Rol
• patch for SDRAM remap bug   Steve Schefter
• [PATCH] Avoid SDRAM access crash   Steve Schefter
• [PATCH] Avoid SDRAM access crash   Steve Schefter
• Re[2]: Flashing automatically the default environment   Alexander Shiyan
• [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver   Alexander Shiyan
• [PATCH 2/6] i.MX: Removed unused declaration for imx_iim_get_mac   Alexander Shiyan
• [PATCH 3/6] mc13xxx: Added dummy definition for mc13xxx_get() if CONFIG_MFD_MC13XXX is not set   Alexander Shiyan
• [PATCH 4/6] tx51: Unused mc13xxx.h include removed   Alexander Shiyan
• [PATCH 5/6] PCM970: Add MMC support   Alexander Shiyan
• [PATCH 6/6] PCM038: Read UID from fuses and pass this value to kernel as serial number   Alexander Shiyan
• Re[2]: [PATCH 6/6] PCM038: Read UID from fuses and pass this value to kernel as serial number   Alexander Shiyan
• [PATCH 6/6] PCM038: Read UID from fuses and pass this value to kernel as serial number   Alexander Shiyan
• Re[2]: [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver   Alexander Shiyan
• Re[2]: [PATCH 3/6] mc13xxx: Added dummy definition for mc13xxx_get() if CONFIG_MFD_MC13XXX is not set   Alexander Shiyan
• Re[2]: [PATCH 1/6] mc13xxx: Define maximum SPI clock frequency global to driver   Alexander Shiyan
• [PATCH 1/3] mc13xxx: Added dummy definitions if CONFIG_MFD_MC13XXX is not set   Alexander Shiyan
• [PATCH 2/3] mc13xxx: Hide struct mc13xxx from board support code   Alexander Shiyan
• [PATCH 3/3] PCM038: Added setup for OTG host pins   Alexander Shiyan
• Re: [PATCH 2/3] mc13xxx: Hide struct mc13xxx from board support code   Alexander Shiyan
• [PATCH 9/9] Add compressed image support   Johannes Stezenbach
• [PATCH 9/9] Add compressed image support   Johannes Stezenbach
• [PATCH 9/9] Add compressed image support   Johannes Stezenbach
• [PATCH 8/9] ARM: Separate assembler functions into their own section   Johannes Stezenbach
• AT91SAM9263-EK   Stutz Sven
• AT91SAM9263-EK   Stutz Sven
• AT91SAM9263-EK   Stutz Sven
• AT91SAM9263-ek - Kernel panic   Stutz Sven
• AT91SAM9263-ek - Kernel panic   Stutz Sven
• ST Chipsets support   Amine THADI
• [ANNOUNCE] Barebox Logo   Igor Trevisan
• Nataraj added you as a contact on Twoo and wants to connect   Nataraj via Twoo
• [PATCH] lib/Kconfig: Fix alignment of arrows in label   Bernhard Walle
• Booting kernel from FAT partition on beagle board   Bernhard Walle
• Booting kernel from FAT partition on beagle board   Bernhard Walle
• [PATCH 0/3] omap gpmc nand autodetect   Jan Weitzel
• [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC   Jan Weitzel
• [PATCH 2/3] gpmc: Add reset to gpmc_generic_init   Jan Weitzel
• [RFC 3/3] mtd omap nand: reconfigure buswidth   Jan Weitzel
• [PATCH 1/3 v2] OMAP GPMC NAND: use buswidth from GPMC   Jan Weitzel
• [PATCH 2/3 v2] gpmc: Add reset to gpmc_generic_init   Jan Weitzel
• [PATCH 1/3] OMAP GPMC NAND: use buswidth from GPMC   Jan Weitzel
• [PATCH 0/3] nand: autodetect buswith   Jan Weitzel
• [PATCH 1/3] nand: base: Add autodetect buswidth   Jan Weitzel
• [PATCH 2/3] OMAP GPMC NAND: add set_buswidth callback   Jan Weitzel
• [PATCH 3/3] PCA-A_XL2 PCM049: Use autodetection for NAND width   Jan Weitzel
• [PATCH] OMAP4: cleanup   Jan Weitzel
• [PATCH] OMAP4: cleanup   Jan Weitzel
• [PATCH] ARM/imx/pcm043: increase size of "self" partition   Jan Weitzel
• [PATCH] omap: use 512k barebox partition   Jan Weitzel
• [PATCH 0/3] omap: 4460 support   Jan Weitzel
• [PATCH 1/3] Add support for OMAP4460 TPS62361   Jan Weitzel
• [PATCH 2/3] OMAP4460: ram init changes   Jan Weitzel
• [PATCH 3/3] OMAP4460: clock init   Jan Weitzel
• 540lm 1 BY 7w COB GU10 MR16 offer   crystal2
• barebox image size   christian.buettner at rafi.de
• Antwort: Re: barebox image size   christian.buettner at rafi.de
• Antwort: Re: Antwort: Re: barebox image size   christian.buettner at rafi.de
• Antwort: Re: Antwort: Re: Antwort: Re: barebox image size   christian.buettner at rafi.de
• Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size   christian.buettner at rafi.de
• Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size   christian.buettner at rafi.de
• Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size   christian.buettner at rafi.de
• Antwort: RE: Antwort: Re: Antwort: Re: Antwort: Re: Antwort: Re: barebox image size   christian.buettner at rafi.de
• barebox spi test   christian.buettner at rafi.de
• nor flash board init code   christian.buettner at rafi.de
• Antwort: Re: nor flash board init code   christian.buettner at rafi.de
• Antwort: Re: Re: nor flash board init code   christian.buettner at rafi.de
• Antwort: Re: Re: Re: nor flash board init code   christian.buettner at rafi.de
• Antwort: Re: Re: Re: nor flash board init code   christian.buettner at rafi.de
• Antwort: Re: Re: Re: Re: nor flash board init code   christian.buettner at rafi.de
• [PATCH] Avoid SDRAM access crash   steve at scheftech.com
• Atmel SD/MMC info error (report only)   gpontis at spamcop.net

Last message date: Tue Jul 31 15:45:42 EDT 2012
Archived on: Wed Aug 1 00:01:39 EDT 2012

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...